Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

GN1303

GN Semic · Real Time Clocks · SOP-8

GN1303 from GN Semic, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vcc2 power_in Primary power supply pin in dual-supply configuration; operates on the higher of VCC1 and VCC2, receiving power when 0.2V higher than VCC1, maintaining time and date data during main power loss.
2 X1 input Crystal oscillator input, designed for 32.768kHz quartz crystal with specified 6pF load capacitance.
3 X2 output Crystal oscillator output; floats when using external 32.768kHz oscillator as alternative configuration.
4 GND power_in Power ground reference.
5 CE input Chip enable input, must remain high during read/write operations; 40kΩ typical pull-down resistor to ground.
6 I/O bidirectional Bidirectional data input/output on three-wire serial interface; 40kΩ typical pull-down resistor to ground.
7 SCLK input Serial clock input for synchronizing data actions on three-wire serial interface; 40kΩ typical pull-down resistor to ground.
8 Vcc1 power_in Low-power primary or backup power supply pin; connects to rechargeable energy source in trickle-charge systems, with UL certification for lithium battery reverse-charge protection.

Key specifications

Parameter Value
Manufacturer GN Semic
Package SOP-8
Category Clock/Timing
Pins 8

CAD (KiCad official)

  • Symbol: GN1303
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: gn1303-etched.step / gn1303-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gn1303.step / gn1303.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GN Semic datasheet (14 pp, sha256 50bcdf2949e09f5b, retrieved 2026-09-18, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF