3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSG-9101CG 25.000Mhz C05PGAAA
Seiko Epson · Pre-programmed Oscillators · SMD2520-4P
SG-9101CG 25.000Mhz C05PGAAA from Seiko Epson, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable: High gives the specified frequency at OUT, Low forces OUT low (weak pull down) with only the output driver disabled; VIH is 70 % VCC min and VIL is 30 % VCC max. |
| 2 | GND | power_in | Ground; place a 0.1 μF capacitor between VCC and GND as close to the device as possible. |
| 3 | OUT | output | Clock output (CMOS) with a maximum load of 15 pF, 0.67 MHz to 170 MHz. |
| 4 | VCC | power_in | Power supply, 1.62 V to 3.63 V, with a 0.1 μF capacitor to GND placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD2520-4P |
| Category | Crystal Oscillator/Oscillator/Resonator |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 1.62 | 3.63 | V | 1.62-1.98, 1.98-2.20, 2.20-2.80, 2.70-3.63 V ranges | 1 | |
| Output frequency range | fo | 0.67 | 170 | MHz | 1 | ||
| Nominal output frequency | fo | 25 | MHz | MPN 25.000MHz | 1 | ||
| Storage temperature | T_stg | -40 | 125 | ºC | Storage as single product. | 1 | |
| Operating temperature | T_use | -40 | 85 | ºC | Code G | 1 | |
| Frequency tolerance | f_tol | -50 | 50 | ×10-6 | Average frequency of 1s gate time. | 1 | |
| Current consumption, 1.62-1.98 V | ICC | 3.4 | mA | No load, fo = 20 MHz, T_use = +105 ºC | 1 | ||
| Current consumption, 1.98-2.20 V | ICC | 3.5 | mA | No load, fo = 20 MHz, T_use = +105 ºC | 1 | ||
| Current consumption, 2.20-2.80 V | ICC | 3.6 | mA | No load, fo = 20 MHz, T_use = +105 ºC | 1 | ||
| Current consumption, 2.70-3.63 V | ICC | 3.7 | mA | No load, fo = 20 MHz, T_use = +105 ºC | 1 | ||
| Symmetry | SYM | 45 | 55 | % | 50 % VCC Level | 1 | |
| Output voltage high | VOH | 90 | % VCC | Default (fo ≤ 40 MHz) IOH: -1.5/-2.0/-2.5/-3.0 mA for 1.62-1.98/1.98-2.20/2.20-2.80/2.70-3.63 V | 1 | ||
| Output voltage low | VOL | 10 | % VCC | Default (fo ≤ 40 MHz) IOL: 1.5/2.0/2.5/3.0 mA for 1.62-1.98/1.98-2.20/2.20-2.80/2.70-3.63 V | 1 | ||
| Output load condition | L_CMOS | 15 | pF | 1 | |||
| Input voltage high (OE) | VIH | 70 | % VCC | 1 | |||
| Input voltage low (OE) | VIL | 30 | % VCC | 1 | |||
| Rise/fall time, default | tr/tf | 6 | ns | fo ≤ 40 MHz, 20 % - 80 % VCC, L_CMOS = 15 pF | 1 | ||
| Disable time | t_stp | 1 | μs | Measured from the time OE or ST pin crosses 30 % VCC | 1 | ||
| Enable time | t_sta | 1 | μs | Measured from the time OE pin crosses 70 % VCC | 1 | ||
| Start-up time | t_str | 3 | ms | Measured from the time VCC reaches its rated minimum value, 1.62 V | 1 | ||
| ESD HBM | 2000 | V | Human Body Model, breakdown voltage | 6 | |||
| ESD MM | 250 | V | Machine Model, breakdown voltage | 6 | |||
| ESD CDM | 750 | V | Charged Device Model, breakdown voltage | 6 | |||
| Reflow peak temperature | 260 | °C | MSL 1, Peak Temp. (Max) | 6 |
CAD (KiCad official)
- Symbol:
SG-9101CG 25.000Mhz C05PGAAA - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
sg-9101cg-25-000mhz-c05pgaaa-etched.step/sg-9101cg-25-000mhz-c05pgaaa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sg-9101cg-25-000mhz-c05pgaaa.step/sg-9101cg-25-000mhz-c05pgaaa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seiko Epson datasheet (8 pp, sha256
6dafa52ee8e20080, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).