Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SIT1602BI-71-33E-12.000000D

SiTime · Pre-programmed Oscillators · SMD2016-4P

SIT1602BI-71-33E-12.000000D from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST/NC input Pin 1 is the output enable input in this OE-option part: logic high gives the specified frequency output, logic low puts the output in high impedance, and a pull-up of 10 kΩ or less is recommended if the pin is not externally driven.
2 GND power_in Electrical ground; a capacitor of 0.1 µF or higher between VDD and GND is required.
3 OUT output Oscillator clock output (LVCMOS/HCMOS compatible).
4 VDD power_in Power supply voltage; for the 3.3 V option (Vdd_3.3) the rated range is 2.97 V to 3.63 V, and a 0.1 µF or higher capacitor between VDD and GND is required.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD2016-4P
Category Crystals/Oscillators/Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Stability F_stab -20 20 ppm Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load. 1
Operating Temperature Range (Industrial) T_use -40 85 °C Industrial 1
Supply Voltage Option Vdd_3.3 Vdd_3.3 2.97 3.3 3.63 V 1
Current Consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY 1
OE Disable Current I_OD 4.2 mA Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. OE = GND, Output in high-Z state 1
Standby Current I_std 2.6 4.3 A ST = GND, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. Output is weakly pulled down 1
Duty Cycle DC 45 55 % All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 2
Output High Voltage VOH 90 % Vdd IOH = -4 mA (Vdd_3.0 and Vdd_3.3); IOH = -3 mA (Vdd_2.8 and Vdd_2.5); IOH = -2 mA (Vdd_1.8) 2
Output Low Voltage VOL 10 % Vdd IOH = -4 mA (Vdd_3.0 and Vdd_3.3); IOH = -3 mA (Vdd_2.8 and Vdd_2.5); IOH = -2 mA (Vdd_1.8) 2
Input High Voltage VIH 70 % Vdd Pin 1, OE or ST 2
Input Low Voltage VIL 30 % Vdd Pin 1, OE or ST 2
Input Pull-up Impedance Z_in 50 87 150 kΩ Pin 1, OE logic high or logic low, or ST logic high 2
Input Pull-up Impedance (ST logic low) Z_in 2 MΩ Pin 1, ST logic low 2
Rise/Fall Time (20% to 80%) Tr, Tf 1 2 ns 20% - 80% Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3 2
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 138 ns f = 77.76 MHz. For other frequencies, T_oe = 100 ns + 3*cycles 2
Resume Time T_resume 5 ms Measured from the time ST pin crosses 50% threshold 2
RMS Period Jitter T_jitt 1.8 3 ps f = 75 MHz, Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX 2
Peak-to-peak Period Jitter T_pk 12 25 ps f = 75 MHz, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY 2
RMS Phase Jitter (random), 900 kHz to 7.5 MHz T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz. Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX 2
RMS Phase Jitter (random), 12 kHz to 20 MHz T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz. Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX 2
Storage Temperature -65 150 °C 3
Supply Voltage (Vdd) absolute maximum Vdd -0.5 4 V 3
Electrostatic Discharge 2000 V 3
Soldering Temperature 260 °C follow standard Pb free soldering guidelines 3
Junction Temperature 150 °C Exceeding this temperature for extended period of time may damage the device 3
Thermal Resistance Junction-to-Ambient, 4 Layer Board (2016 package) 152 °C/W JA, 4 Layer Board, package 2016 3
Thermal Resistance Junction-to-Ambient, 2 Layer Board (2016 package) 252 °C/W JA, 2 Layer Board, package 2016 3
Thermal Resistance Junction-to-Case, Bottom (2016 package) 36 °C/W JC, Bottom, package 2016 3
Maximum Operating Junction Temperature 95 °C Max operating ambient temperature 85°C 3

CAD (KiCad official)

  • Symbol: SIT1602BI-71-33E-12.000000D
  • Footprint: Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm
  • 3D model: SMD2016-4P (KiCad packages3D, STEP)
  • 3D model files: sit1602bi-71-33e-12-000000d-etched.step / sit1602bi-71-33e-12-000000d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit1602bi-71-33e-12-000000d.step / sit1602bi-71-33e-12-000000d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (18 pp, sha256 70f0fbf9f24afbd0, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF