Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NSVMMBT2222ATT1G

onsemi · Bipolar Transistors - BJT · SOT-416

NSVMMBT2222ATT1G from onsemi, in a SOT-416. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BASE input Base of the NPN transistor; Emitter-Base voltage limited to 6.0 Vdc maximum (VEBO) and V(BR)EBO min 6.0 Vdc.
2 EMITTER passive Emitter of the NPN transistor, the common terminal for the base-emitter junction rated up to 6.0 Vdc VEBO.
3 COLLECTOR passive Collector of the NPN transistor with VCEO 40 Vdc, VCBO 75 Vdc and continuous collector current IC of 600 mAdc maximum.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOT-416
Category Transistors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Collector-Emitter Breakdown Voltage V(BR)CEO 40 Vdc IC = 10 mAdc, IB = 0 2
Collector-Base Breakdown Voltage V(BR)CBO 75 Vdc IC = 10 µAdc, IE = 0 2
Emitter-Base Breakdown Voltage V(BR)EBO 6 Vdc IE = 10 µAdc, IC = 0 2
Base Cutoff Current IBL 20 nAdc VCE = 60 Vdc, VEB = 3.0 Vdc 2
Collector Cutoff Current ICEX 10 nAdc VCE = 60 Vdc, VEB = 3.0 Vdc 2
DC Current Gain HFE 35 IC = 0.1 mAdc, VCE = 10 Vdc 2
DC Current Gain HFE 50 IC = 1.0 mAdc, VCE = 10 Vdc 2
DC Current Gain HFE 75 IC = 10 mAdc, VCE = 10 Vdc 2
DC Current Gain HFE 100 IC = 150 mAdc, VCE = 10 Vdc 2
DC Current Gain HFE 40 IC = 500 mAdc, VCE = 10 Vdc 2
Collector-Emitter Saturation Voltage VCE(sat) 0.3 Vdc IC = 150 mAdc, IB = 15 mAdc 2
Collector-Emitter Saturation Voltage VCE(sat) 1 Vdc IC = 500 mAdc, IB = 50 mAdc 2
Base-Emitter Saturation Voltage VBE(sat) 0.6 1.2 Vdc IC = 150 mAdc, IB = 15 mAdc 2
Base-Emitter Saturation Voltage VBE(sat) 2 Vdc IC = 500 mAdc, IB = 50 mAdc 2
Current-Gain Bandwidth Product fT 300 MHz IC = 20 mAdc, VCE = 20 Vdc, f = 100 MHz 2
Output Capacitance Cobo 8 pF VCB = 10 Vdc, IE = 0, f = 1.0 MHz 2
Input Capacitance Cibo 30 pF VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz 2
Input Impedance hie 0.25 1.25 kΩ VCE = 10 Vdc, IC = 10 mAdc, f = 1.0 kHz 2
Voltage Feedback Ratio hre 4 X 10-4 VCE = 10 Vdc, IC = 10 mAdc, f = 1.0 kHz 2
Small-Signal Current Gain hfe 75 375 VCE = 10 Vdc, IC = 10 mAdc, f = 1.0 kHz 2
Output Admittance hoe 25 200 µmhos VCE = 10 Vdc, IC = 10 mAdc, f = 1.0 kHz 2
Noise Figure NF 4 dB VCE = 10 Vdc, IC = 100 µAdc, RS = 1.0 k ohms, f = 1.0 kHz 2
Delay Time td 10 ns VCC = 3.0 Vdc, VBE = -0.5 Vdc, IC = 150 mAdc, IB1 = 15 mAdc 2
Rise Time tr 25 ns VCC = 3.0 Vdc, VBE = -0.5 Vdc, IC = 150 mAdc, IB1 = 15 mAdc 2
Storage Time ts 225 ns VCC = 30 Vdc, IC = 150 mAdc, IB1 = IB2 = 15 mAdc 2
Fall Time tf 60 ns VCC = 30 Vdc, IC = 150 mAdc, IB1 = IB2 = 15 mAdc 2
Collector-Emitter Voltage VCEO 40 Vdc TA = 25°C 1
Collector-Base Voltage VCBO 75 Vdc TA = 25°C 1
Emitter-Base Voltage VEBO 6 Vdc TA = 25°C 1
Collector Current - Continuous IC 600 mAdc TA = 25°C 1
Total Device Dissipation PD 150 mW TA = 25°C, FR4 board, minimum recommended footprint 1
Operating and Storage Junction Temperature Range TJ, Tstg -55 150 °C 1
Thermal Resistance, Junction-to-Ambient RθJA 833 °C/W FR4 board, minimum recommended footprint 1

CAD (KiCad official)

  • Symbol: NSVMMBT2222ATT1G
  • Footprint: Package_TO_SOT_SMD:SOT-416
  • 3D model: SOT-416, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.8 mm nominal SOT-523 height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: nsvmmbt2222att1g-etched.step / nsvmmbt2222att1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nsvmmbt2222att1g.step / nsvmmbt2222att1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (7 pp, sha256 c60223818c55bb3d, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF