Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

QPL9503TR7

Qorvo · RF Amplifiers · DFN-8-EP(2x2)

QPL9503TR7 from Qorvo, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vbias input Sets the Icq bias point for the device through an external bias resistor.
2 RF In input RF input pin that requires an external DC block.
3 NC unconnected No electrical connection; provide grounded land pads for PCB mounting integrity.
4 GND power_in RF/DC ground; use the recommended via pattern to minimize inductance and thermal resistance.
5 Shut Down input A voltage above 1.17 V turns the device off, while ground or a voltage below 0.63 V keeps the LNA in the ON state.
6 GND power_in RF/DC ground; use the recommended via pattern to minimize inductance and thermal resistance.
7 RF Out / DCBias output RF output pin; DC bias must also be injected through an RF bias choke/inductor for operation.
8 NC unconnected No electrical connection; provide grounded land pads for PCB mounting integrity.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Qorvo
Package DFN-8-EP(2x2)
Category RF & Radio
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature TSTORE -65 150 °C 2
Supply Voltage (VDD) VDD 7 V 2
RF Input Power, CW, 50Ω, T=25°C 30 dBm CW, 50Ω, T=25°C 2
RF Input Power, WCDMA, 10dB PAR 27 dBm WCDMA, 10dB PAR 2
RF Input Power, CW, OFF State 30 dBm CW, OFF State 2
Supply Voltage (VDD) VDD 3.3 5 5.25 V 2
TCASE TCASE -40 105 °C 2
Tj for >10^6 hours MTTF Tj 190 °C for >10^6 hours MTTF 2
Operational Frequency Range 600 6000 MHz 2
Gain 18.5 21.6 22.5 dB 2
Input Return Loss 10 dB 2
Output Return Loss 9 dB 2
Noise Figure NF 0.9 1.3 dB Note 1: input trace loss de-embedded 2
Output P1dB P1dB 19 dBm 2
Output IP3 OIP3 30 35.5 dBm Pout=+5 dBm/tone, Δf=1 MHz 2
Shut Down control voltage, On state VPD 0 0.63 V On state, pin 5 2
Shut Down control voltage, Off state (Power down) VPD 1.17 V Off state (Power down), pin 5; upper limit printed as VDD 2
Current, IDD On state IDD 35 56 90 mA On state 2
Current, IDD Off state (Power down) IDD 3 mA Off state (Power down) 2
Shutdown pin current ISD 140 µA VPD ≥ 1.17 V 2
Switching Speed LNA ON to OFF 20 ns LNA ON to OFF 2
Switching Speed LNA OFF to ON 400 ns LNA OFF to ON 2
Thermal Resistance, θjc θjc 48 °C/W channel to case 2

CAD (KiCad official)

  • Symbol: QPL9503TR7
  • Footprint: Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm
  • 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: qpl9503tr7-etched.step / qpl9503tr7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); qpl9503tr7.step / qpl9503tr7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Qorvo datasheet, copy hosted by LCSC (7 pp, sha256 d0a846a77c716e9b, retrieved 2026-11-22)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF