component
MAX6070BAUT25+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Voltage Reference, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX6070BAUT25+T
Analog Devices Inc Maxim Integrated · Voltage Reference · SOT-23-6
MAX6070BAUT25+T from Analog Devices Inc Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FILTER | passive | Filter input for wideband noise reduction; connect a 0.1µF capacitor from FILTER to ground for high-frequency bypass, or leave it unconnected if not used. |
| 2 | GND | power_in | Ground connection for the MAX6070 device, which is connected to the load ground at the reference output. |
| 3 | EN | input | Active-high enable; drive high to enable normal operation and low to disable the output, which forces quiescent current below 1µA with a resistive load of about 200kΩ to ground. |
| 4 | IN | power_in | Supply input, drawing 150µA typical and varying only 1.6µA/V with supply voltage; an optional 0.1µF bypass from IN to GND reduces input-pin noise. |
| 5 | OUTS | output | Voltage reference sense output, connected to OUTF at the point where voltage accuracy is needed to cancel voltage drop on the force lines (Kelvin connection). |
| 6 | OUTF | output | Voltage reference force output that supplies load current, sources and sinks up to 10mA, must be shorted to OUTS close to the load, and needs a 0.1µF to 10µF capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy (MAX6070B/MAX6071B) | -0.08 | 0.08 | % | TA = +25°C | 6 | ||
| Output Voltage Temperature Drift (MAX6070B/MAX6071B) | TCVOUT | 2 | 8 | ppm/°C | 6 | ||
| Line Regulation | 60 | 145 | µV/V | Over specified VIN range, TA = +25°C | 6 | ||
| Line Regulation | 175 | µV/V | Over specified VIN range, TA = TMIN to TMAX | 6 | |||
| Load Regulation, sink | 80 | 140 | µV/mA | 0mA < IOUT < 10mA, sink | 6 | ||
| Load Regulation, source | 75 | 125 | µV/mA | 0mA < IOUT < 10mA, source | 6 | ||
| Dropout Voltage | 110 | 230 | mV | IOUT = 10mA, TA = TMIN to TMAX | 6 | ||
| Output Current | IOUT | -10 | 10 | mA | 6 | ||
| Capacitive-Load Stability Range | 0.1 | 10 | µF | IOUT ≤ 10mA | 6 | ||
| Supply Voltage | VIN | 2.8 | 5.5 | V | Guaranteed by line regulation | 6 | |
| Quiescent Supply Current | IIN | 150 | 235 | µA | TA = +25°C | 6 | |
| Quiescent Supply Current | IIN | 300 | µA | TA = TMIN to TMAX | 6 | ||
| Shutdown Supply Current | ISD | 0.6 | 6 | µA | 6 | ||
| OUTF to GNDS, GNDF, GND voltage | -0.3 | 6 | V | Upper limit printed as the lower of (VIN + 0.3V) and +6V | 2 | ||
| OUTS to GNDS, GNDF, GND voltage | -0.3 | 6 | V | 2 | |||
| IN to GNDS, GNDF, GND voltage | -0.3 | 6 | V | 2 | |||
| EN to GNDS, GNDF, GND voltage | -0.3 | 6 | V | 2 | |||
| FILTER to GND voltage | -0.3 | 6 | V | Upper limit printed as the lower of (VIN + 0.3V) and +6V | 2 | ||
| GNDS to GNDF voltage | -0.3 | 0.3 | V | 2 | |||
| Continuous Power Dissipation (SOT23) | 347.8 | mW | TA = +70°C; derate 4.3mW/°C above +70°C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Soldering Temperature (reflow) | 260 | °C | 2 | ||||
| Lead Temperature (soldering) | 300 | °C | 10s | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | 2 |
CAD (KiCad official)
- Symbol:
MAX6070BAUT25+T - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
max6070baut25-t-etched.step/max6070baut25-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6070baut25-t.step/max6070baut25-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (24 pp, sha256
7dfac8339258d671, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).