3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSP490EEN
XBLW · RS-485 / RS-422 ICs · SOP-8
SP490EEN from XBLW, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Positive supply, specified for 3.0 ≦ VCC ≦ 5.5 V. |
| 2 | RO | output | Receiver output: high when A-B ≥ -50 mV, low when A-B ≤ -200 mV. |
| 3 | DI | input | Driver input: a low level forces Y low and Z high, and a high level forces Y high and Z low. |
| 4 | GND | power_in | Ground. |
| 5 | Y | output | Driver in-phase (non-inverting) output. |
| 6 | Z | output | Driver inverting output. |
| 7 | B | input | Receiver inverting input. |
| 8 | A | input | Receiver in-phase (non-inverting) input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XBLW |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 3 | 5.5 | V | 4 | ||
| Differential driver output (noload) | VOD1 | 1.5 | 5 | V | Figure 4 | 4 | |
| Differential driver output (RS-422) | VOD2 | 2 | 5 | V | Figure 4, R=50Ω | 4 | |
| Differential driver output (RS-485) | VOD2 | 1.5 | 5 | V | Figure 4, R=27Ω | 4 | |
| Amplitude change in differential output voltage | ∆VOD | 0.2 | V | Figure 4, R=50Ω or R=27Ω | 4 | ||
| Drive common mode output voltage | VOC | 1 | 3 | V | Figure 4, R=50Ω or R=27Ω | 4 | |
| Amplitude change in common mode voltage | ∆VOC | 0.2 | V | Figure 4, R=50Ω or R=27Ω | 4 | ||
| Input high voltage DE,DI,/R | VIH1 | 2 | V | 4 | |||
| Input low voltage DE,DI,/R | VIL1 | 0.8 | V | 4 | |||
| DI input lag | VHYS | 100 | mV | 4 | |||
| Input current (A,B) full duplex | IIN4 | 125 | µA | DE=GND, VCC=GND or 5.25V, VIN=12V | 4 | ||
| Input current (A,B) full duplex | IIN4 | -75 | µA | DE=GND, VCC=GND or 5.25V, VIN=-7V | 4 | ||
| Drive short circuit output current | IOSD | -250 | mA | -7V≦VOUT≦VCC | 4 | ||
| Drive short circuit output current | IOSD | 250 | mA | 0V≦VOUT≦12V | 4 | ||
| Drive short circuit output current | IOSD | -25 | 25 | mA | 0V≦VOUT≦VCC | 4 | |
| Receiver differential threshold voltage | VTH | -200 | -110 | -50 | mV | -7V≦VCM≦12V | 4 |
| Receiver input lag | ΔVTH | 30 | mV | 4 | |||
| Receiver output low voltage | VOL | 0.4 | V | IO=4mA, VID=-200mV | 4 | ||
| Three state output current at receiver end | IOZR | -1 | 1 | µA | 0.4V≦VO≦2.4V | 4 | |
| Receiver input impedance | RIN | 96 | KΩ | -7V≦VCM≦12V | 4 | ||
| Receiver output short-circuit current | IOSR | -7 | 7 | mA | 0V≦VRO≦VCC | 4 | |
| Receiver output short-circuit current | IOSR | -95 | 95 | mA | 0V≦VRO≦VCC | 4 | |
| Static working current | ICC | 270 | 600 | µA | No load, DI=0 or VCC | 4 | |
| ESD HBM | 3000 | V | 4 | ||||
| Drive input to output | TDPLH | 250 | 720 | 900 | ns | Figures 5 and 6, RDIFF=54Ω, CL1=CL2=100pF | 5 |
| Drive output skew /tDPLH - tDPHL/ | TDHKEW | -100 | 3 | 100 | ns | Figures 5 and 6, RDIFF=54Ω, CL1=CL2=100pF | 5 |
| Drive up or down time | tDR, tDF | 200 | 530 | 750 | ns | Figures 5 and 6, RDIFF=54Ω, CL1=CL2=100pF | 5 |
| Maximum data rate | FMAX | 10 | Mbps | 5 | |||
| Receiver input to output | TRPLH | 127 | 200 | ns | Figures 7 and 8, rise and fall times 15 ns, /VID/≥2.0V | 5 | |
| Differential receiver skew /tDPLH - tDPHL/ | TRSKD | -30 | 3 | 30 | ns | Figures 7 and 8, rise and fall times 15 ns, /VID/≥2.0V | 5 |
| Supply voltage | VCC | 7 | V | 3 | |||
| Drive input voltage | DI | -0.3 | V | 3 | |||
| Receiver output voltage | RO | -0.3 | V | 3 | |||
| Continuous power consumption | 471 | mW | SOP8 | 3 | |||
| Operating temperature range | 0 | 70 | ℃ | 3 | |||
| Storage temperature | -65 | 150 | ℃ | 3 | |||
| Welding temperature | TLEAD | 245 | ℃ | 10S | 3 |
CAD (KiCad official)
- Symbol:
SP490EEN - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
sp490een-etched.step/sp490een-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sp490een.step/sp490een.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XBLW datasheet (9 pp, sha256
076a2327d80dd743, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).