Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TMUX1309APWR

Texas Instruments · IC · TSSOP-16

TMUX1309APWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S0B bidirectional Source pin 0 of mux B; signal path can be an input or output.
2 S2B bidirectional Source pin 2 of mux B; signal path can be an input or output.
3 DB bidirectional Drain pin (common) of mux B; signal path can be an input or output.
4 S3B bidirectional Source pin 3 of mux B; signal path can be an input or output.
5 S1B bidirectional Source pin 1 of mux B; signal path can be an input or output.
6 EN input Active-low logic input: when high all switches are turned off, when low the A[1:0] address inputs determine which switch is turned on.
7 N.C. unconnected Not internally connected.
8 GND power_in Ground (0V) reference.
9 A1 input Address line 1 that controls the switch configuration per the truth table.
10 A0 input Address line 0 that controls the switch configuration per the truth table.
11 S3A bidirectional Source pin 3 of mux A; signal path can be an input or output.
12 S0A bidirectional Source pin 0 of mux A; signal path can be an input or output.
13 DA bidirectional Drain pin (common) of mux A; signal path can be an input or output.
14 S1A bidirectional Source pin 1 of mux A; signal path can be an input or output.
15 S2A bidirectional Source pin 2 of mux A; signal path can be an input or output.
16 VDD power_in Positive power supply, the most positive supply potential; connect a 0.1µF to 10µF decoupling capacitor between VDD and GND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD -0.5 6 V 8
Logic control input pin voltage (EN, A0, A1) VSEL or VEN -0.5 6 V 8
Source or drain voltage VS or VD -0.5 1 V Max printed as VDD+1.0 (value is the +1.0 V offset above VDD) 8
Logic control input pin current ISEL or IEN -30 30 mA 8
Continuous current through switch IS or ID (CONT) -50 50 mA -40°C to +85°C 8
Continuous current through switch IS or ID (CONT) -25 25 mA -40°C to +125°C 8
Continuous current through GND IGND -100 100 mA 8
Total power dissipation Ptot 500 mW TSSOP derates above TA = 80°C by 7.2mW/°C 8
Storage temperature Tstg -65 150 °C 8
Junction temperature TJ 150 °C 8
ESD HBM V(ESD) -2000 2000 V HBM, ANSI/ESDA/JEDEC JS-001, all pins 8
ESD CDM V(ESD) -750 750 V CDM, JESD22-C101 or JS-002, all pins 8
Junction-to-ambient thermal resistance RθJA 139 °C/W PW (TSSOP), TMUX1309 9
Junction-to-case (top) thermal resistance RθJC(top) 77.2 °C/W PW (TSSOP), TMUX1309 9
Junction-to-board thermal resistance RθJB 84.2 °C/W PW (TSSOP), TMUX1309 9
Junction-to-top characterization parameter ΨJT 26.5 °C/W PW (TSSOP), TMUX1309 9
Junction-to-board characterization parameter ΨJB 83.8 °C/W PW (TSSOP), TMUX1309 9
Supply voltage VDD 1.62 5.5 V 9
Signal path input/output voltage VS or VD 0 V Sx, D; max printed as VDD 9
Logic control input pin voltage VSEL or VEN 0 5.5 V EN, A0, A1 9
Continuous current through switch IS or ID (CONT) -50 50 mA -40°C to +85°C 9
Continuous current through switch IS or ID (CONT) -25 25 mA -40°C to +125°C 9
Current per input into source or drain pins when signal voltage exceeds recommended operating voltage IOK -50 50 mA 9
Injected current into single off switch input IINJ -50 50 mA 9
Total injected current into all off switch inputs combined IINJ_ALL -100 100 mA 9
Ambient temperature TA -40 125 °C 9
On-state switch resistance RON 650 1700 Ω VS = 0V to VDD, ISD = 0.5mA, VDD = 1.8V; typ at 25°C, max -40°C to 125°C 10
On-state switch resistance RON 230 670 Ω VS = 0V to VDD, ISD = 0.5mA, VDD = 2.5V; typ at 25°C, max -40°C to 125°C 10
On-state switch resistance RON 120 370 Ω VS = 0V to VDD, ISD = 0.5mA, VDD = 3.3V; typ at 25°C, max -40°C to 125°C 10
On-state switch resistance RON 75 270 Ω VS = 0V to VDD, ISD = 0.5mA, VDD = 5V; typ at 25°C, max -40°C to 125°C 10
On-state switch resistance matching between inputs ΔRON 10 45 Ω VS = VDD / 2, ISD = 0.5mA, VDD = 1.8V; max -40°C to 125°C 10
On-state switch resistance matching between inputs ΔRON 3 22 Ω VS = VDD / 2, ISD = 0.5mA, VDD = 2.5V; max -40°C to 125°C 10
On-state switch resistance matching between inputs ΔRON 2 15 Ω VS = VDD / 2, ISD = 0.5mA, VDD = 3.3V; max -40°C to 125°C 10
On-state switch resistance matching between inputs ΔRON 1 14 Ω VS = VDD / 2, ISD = 0.5mA, VDD = 5V; max -40°C to 125°C 10
Source off-state leakage current IS(OFF) -25 25 nA Switch Off, VD = 0.8 x VDD/ 0.2 x VDD, VS = 0.2 x VDD/ 0.8 x VDD, all VDD; -40°C to 85°C 10
Source off-state leakage current IS(OFF) -800 800 nA Switch Off, VD = 0.8 x VDD/ 0.2 x VDD, VS = 0.2 x VDD/ 0.8 x VDD, all VDD; -40°C to 125°C 10
Drain off-state leakage current (common drain pin) ID(OFF) -45 45 nA Switch Off, VD = 0.8 x VDD/ 0.2 x VDD, VS = 0.2 x VDD/ 0.8 x VDD, all VDD; -40°C to 85°C 10
Drain off-state leakage current (common drain pin) ID(OFF) -800 800 nA Switch Off, VD = 0.8 x VDD/ 0.2 x VDD, VS = 0.2 x VDD/ 0.8 x VDD, all VDD; -40°C to 125°C 10
Channel on-state leakage current ID(ON), IS(ON) -45 45 nA Switch On, VD = VS = 0.8 x VDD or VD = VS = 0.2 x VDD, all VDD; -40°C to 85°C 10
Channel on-state leakage current ID(ON), IS(ON) -800 800 nA Switch On, VD = VS = 0.8 x VDD or VD = VS = 0.2 x VDD, all VDD; -40°C to 125°C 10
Source off capacitance CSOFF 2 14 pF VS = VDD / 2, f = 1MHz, all VDD 10
Drain off capacitance CDOFF 7 37 pF VS = VDD / 2, f = 1MHz, all VDD 10
On capacitance CSON, CDON 11 40 pF VS = VDD / 2, f = 1MHz, all VDD 10
VDD supply current IDD 1 1.2 µA Logic inputs = 0V or VDD, VDD = 1.8V; max -40°C to 125°C 10
VDD supply current IDD 1 1.5 µA Logic inputs = 0V or VDD, VDD = 2.5V; max -40°C to 125°C 10
VDD supply current IDD 1 2 µA Logic inputs = 0V or VDD, VDD = 3.3V; max -40°C to 125°C 10
VDD supply current IDD 1 3 µA Logic inputs = 0V or VDD, VDD = 5V; max -40°C to 125°C 10
Input logic high VIH 0.95 5.5 V VDD = 1.8V, -40°C to 125°C 11
Input logic high VIH 1.25 5.5 V VDD = 5V, -40°C to 125°C 11
Input logic low VIL 0 0.6 V VDD = 1.8V, -40°C to 125°C 11
Input logic low VIL 0 0.95 V VDD = 5V, -40°C to 125°C 11
Logic high input leakage current IIH 1 uA VLOGIC = 1.8V or VDD, All VDD 11
Logic low input leakage current IIL -1 uA VLOGIC = 0V, All VDD 11
Logic input capacitance CIN 1 2 pF VLOGIC = 0V, 1.8V, VDD, f = 1MHz, All VDD 11
Charge injection QINJ -1.5 pC VS = VDD / 2, RS = 0Ω, CL = 100pF, VDD = 5V 11
Bandwidth BW 500 MHz VBIAS = VDD / 2, VS = 200mVpp, RL = 50Ω, CL = 5pF, VDD = 5V 11
Propagation delay tPD 15 30 ns CL = 50pF, Sx to D, D to Sx, VDD = 1.8V; max -40°C to 125°C 12
Propagation delay tPD 4 10 ns CL = 50pF, Sx to D, D to Sx, VDD = 5V; max -40°C to 125°C 12
Transition-time between inputs tTRAN 44 103 ns RL = 10kΩ, CL = 50pF, Ax to D, Ax to Sx, VDD = 1.8V; max -40°C to 125°C 12
Transition-time between inputs tTRAN 18 46 ns RL = 10kΩ, CL = 50pF, Ax to D, Ax to Sx, VDD = 5V; max -40°C to 125°C 12
Turnon-time from enable tON(EN) 39 75 ns RL = 10kΩ, CL = 50pF, EN to D, EN to Sx, VDD = 1.8V; max -40°C to 125°C 12
Turnon-time from enable tON(EN) 24 37 ns RL = 10kΩ, CL = 50pF, EN to D, EN to Sx, VDD = 5V; max -40°C to 125°C 12
Turnoff time from enable tOFF(EN) 60 85 ns RL = 10kΩ, CL = 50pF, EN to D, EN to Sx, VDD = 1.8V; max -40°C to 125°C 12
Turnoff time from enable tOFF(EN) 28 55 ns RL = 10kΩ, CL = 50pF, EN to D, EN to Sx, VDD = 5V; max -40°C to 125°C 12
Break before make time tBBM 1 16 ns RL = 10kΩ, CL = 15pF, Sx to D, D to Sx, VDD = 1.8V 12
Break before make time tBBM 1 33 ns RL = 10kΩ, CL = 15pF, Sx to D, D to Sx, VDD = 5V 12

CAD (KiCad official)

  • Symbol: TMUX1309APWR
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: tmux1309apwr-etched.step / tmux1309apwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tmux1309apwr.step / tmux1309apwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (51 pp, sha256 f7c7ee336fa1da1e, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF