component
1ED3124MC12HXUMA1
Public Made by Adomby adom
Infineon Technologies Gate Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown1ED3124MC12HXUMA1
Infineon Technologies · Gate Drivers · SOIC-8
1ED3124MC12HXUMA1 from Infineon Technologies, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Logic input supply pin with a 3.1 V to 15 V operating range referred to GND1, and a 17 V absolute maximum. |
| 2 | IN+ | input | Non-inverted driver input (active high) with logic low at or below 1.1 V and logic high at or above 2.5 V, and an internal 75 kΩ pull-down favoring off-state. |
| 3 | IN- | input | Inverted driver input (active low) with logic low at or below 1.1 V and logic high at or above 2.5 V, and an internal 75 kΩ pull-up favoring off-state. |
| 4 | GND1 | power_in | Logic ground reference for the input circuit, to which all input-side parameters are referred. |
| 5 | VEE2 | power_in | Power ground reference of the output driving circuit, connected to the negative supply voltage in bipolar supply operation. |
| 6 | OUT- | output | Driver sink output that switches to VEE2 in off-state to turn off the external IGBT, and is held at a low level by active shut-down during UVLO. |
| 7 | OUT+ | output | Driver source output that switches to VCC2 in on-state to turn on the external IGBT, and is turned off at an UVLO event. |
| 8 | VCC2 | power_in | Positive output-side supply with a 10 V to 35 V operating range referred to VEE2 and a 40 V absolute maximum, requiring a blocking capacitor placed close to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SOIC-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | pet | Maximum repetitive insulation voltage VIORM 1767 V (peak) | 17 |
CAD (KiCad official)
- Symbol:
1ED3124MC12HXUMA1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
1ed3124mc12hxuma1-etched.step/1ed3124mc12hxuma1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);1ed3124mc12hxuma1.step/1ed3124mc12hxuma1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (20 pp, sha256
8633c6933062e730, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).