component
SK6013SD4-18
Public Made by Adomby adom
Suntek Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN-4-EP(1x1). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSK6013SD4-18
Suntek · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · DFN-4-EP(1x1)
SK6013SD4-18 from Suntek, in a DFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Output pin; bypass with a 1μF ceramic capacitor from this pin to ground, with X7R or X5R temperature characteristics and ESR of 5 to 100 mΩ recommended. |
| 2 | GND | power_in | Ground pin; the exposed thermal pad must also be connected to GND. |
| 3 | EN | input | Enable control input, active high (EN low threshold 0.3 V, EN high threshold 1.5 V); do not leave EN floating, and tie it to IN if the feature is not used. |
| 4 | IN | power_in | Supply input pin, which must be closely decoupled to GND with a 1μF or greater ceramic capacitor; recommended input voltage range is 2.0 to 6.0 V. |
| 5 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Suntek |
| Package | DFN-4-EP(1x1) |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Operation Range | VIN | 2 | 6 | V | 4 | ||
| Quiescent Current | IQ | 40 | 70 | µA | VEN = VIN, IOUT=0mA | 4 | |
| Shutdown Current | ISHDN | 0.01 | 1 | µA | VEN = 0V | 4 | |
| Regulated Output Voltage | VOUT | -2 | 2 | % | IOUT = 1mA, -40℃ ≤ TA ≤ 85℃ | 4 | |
| Line Regulation | 0.03 | 0.2 | % | VIN = VOUT + 1 V to 5.5 V, IOUT = 10 mA | 4 | ||
| Load Regulation | 15 | 40 | IOUT = 1 mA ~ 300 mA | 4 | |||
| EN pull-down resistance | RPD | 0.8 | 1 | 1.3 | MΩ | 4 | |
| EN Pin Input Current | IEN | 0 | 0.1 | µA | 4 | ||
| IN Voltage | -0.3 | 6.5 | V | 3 | |||
| Other Pin Voltage (upper limit VIN + 0.3 V) | -0.3 | V | 3 | ||||
| Maximum Load Current | 500 | mA | 3 | ||||
| Operating Junction Temperature | -40 | 125 | °C | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Lead Temperature (Soldering) | 260 | °C | 10 sec | 3 | |||
| VIN Input Voltage (recommended) | VIN | 2 | 6 | V | 3 | ||
| Output Current (recommended) | IOUT | 0 | 300 | mA | 3 | ||
| Operating Ambient Temperature (recommended) | TA | -40 | 85 | °C | 3 | ||
| Effective Input Ceramic Capacitor Value | CIN | 0.47 | 4.7 | uF | 3 | ||
| Effective Output Ceramic Capacitor Value | COUT | 0.47 | 4.7 | uF | 3 | ||
| Input and Output Capacitor Equivalent Series Resistance | ESR | 5 | 100 | mΩ | 3 | ||
| Junction to Ambient Thermal Resistance | θJA | 250 | °C/W | 3 | |||
| Soft-start Time from Enable to Power On | TON | 25 | µs | from Enable to Power On | 4 | ||
| Current Limit | ILIM | 300 | mA | 4 | |||
| Power Supply Rejection Ratio | PSRR | 75 | dB | f = 1 kHz, COUT = 1 μF, IOUT = 20 mA | 4 | ||
| Power Supply Rejection Ratio | PSRR | 65 | dB | f = 10 kHz, COUT = 1 μF, IOUT = 30 mA | 4 | ||
| Output Noise | eN | 45 | µVRMS | 10 Hz to100 kHz, IOUT = 200 mA, VOUT = 1.2 V, COUT = 1 μF | 4 | ||
| EN Low Threshold | VENL | 0.3 | V | 4 | |||
| EN High Threshold | VENH | 1.5 | V | 4 | |||
| Over-temperature Shutdown Threshold | TTSD | 155 | ℃ | 4 | |||
| Over-temperature Shutdown Hysteresis | TTSR | 20 | ℃ | 4 |
CAD (KiCad official)
- Symbol:
SK6013SD4-18 - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: DFN-4-EP(1x1) (KiCad packages3D, STEP)
- 3D model files:
sk6013sd4-18-etched.step/sk6013sd4-18-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sk6013sd4-18.step/sk6013sd4-18.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Suntek datasheet (12 pp, sha256
fab50ac23fc378a1, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).