Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP7940M-I/MS

Microchip Tech · Real-time Clocks (RTC) · MSOP-8

MCP7940M-I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 X1 input Quartz crystal input for the 32.768 kHz crystal (6-9 pF load), also serves as the external clock input when EXTOSC is set.
2 X2 output Quartz crystal output for the external 32.768 kHz crystal; leave floating when an external clock is used on X1.
3 NC unconnected Not connected.
4 VSS power_in Ground.
5 SDA bidirectional Open-drain bidirectional I2C serial data pin that needs a pull-up resistor to VCC (typically 10 kΩ for 100 kHz, 2 kΩ for 400 kHz).
6 SCL input I2C serial clock input used to synchronize data transfer to and from the device (up to 400 kHz).
7 MFP output Open-drain multifunction output for alarm, square wave or general purpose output (OUT bit); requires a pull-up to VCC (typically 10 kΩ) and may be left floating if unused.
8 VCC power_in Primary power supply, operating range 1.8V to 5.5V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category RTC/Clock Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High-level input voltage VIH 0.7 V min is 0.7 VCC 3
Low-level input voltage (VCC ≥ 2.5V) VIL 0.3 V max is 0.3 VCC; VCC ≥ 2.5V 3
Low-level input voltage (VCC < 2.5V) VIL 0.2 V max is 0.2 VCC; VCC < 2.5V 3
Hysteresis of Schmitt Trigger inputs (SDA, SCL) VHYS 0.05 V min is 0.05 VCC; Note 1 3
Low-level output voltage (MFP, SDA) VOL 0.4 V IOL = 3.0 mA @ VCC = 4.5V; IOL = 2.1 mA @ VCC = 2.5V 3
Input leakage current ILI -1 1 µA VIN = VSS or VCC 3
Output leakage current ILO -1 1 µA VOUT = VSS or VCC 3
Pin capacitance (SDA, SCL, MFP) CIN, COUT 10 pF VCC = 5.0V (Note 1); TA = 25°C, f = 1 MHz 3
SRAM/RTCC register operating current (read) ICCREAD 300 µA VCC = 5.5V, SCL = 400 kHz 3
SRAM/RTCC register operating current (write) ICCWRITE 400 µA VCC = 5.5V, SCL = 400 kHz 3
VCC data-retention current (oscillator off) ICCDAT 1 µA SCL, SDA, VCC = 5.5V 3
Clock frequency FCLK 100 kHz 1.8V ≤ VCC < 2.5V 4
Clock frequency FCLK 400 kHz 2.5V ≤ VCC ≤ 5.5V 4
Clock high time THIGH 4000 ns 1.8V ≤ VCC < 2.5V 4
Clock high time THIGH 600 ns 2.5V ≤ VCC ≤ 5.5V 4
Clock low time TLOW 4700 ns 1.8V ≤ VCC < 2.5V 4
Clock low time TLOW 1300 ns 2.5V ≤ VCC ≤ 5.5V 4
SDA and SCL rise time TR 1000 ns 1.8V ≤ VCC < 2.5V (Note 1) 4
SDA and SCL rise time TR 300 ns 2.5V ≤ VCC ≤ 5.5V (Note 1) 4
SDA and SCL fall time TF 1000 ns 1.8V ≤ VCC < 2.5V (Note 1) 4
SDA and SCL fall time TF 300 ns 2.5V ≤ VCC ≤ 5.5V (Note 1) 4
Start condition hold time THD:STA 4000 ns 1.8V ≤ VCC < 2.5V 4
Start condition hold time THD:STA 600 ns 2.5V ≤ VCC ≤ 5.5V 4
Start condition setup time TSU:STA 4700 ns 1.8V ≤ VCC < 2.5V 4
Start condition setup time TSU:STA 600 ns 2.5V ≤ VCC ≤ 5.5V 4
Data input hold time THD:DAT 0 ns Note 2 4
Data input setup time TSU:DAT 250 ns 1.8V ≤ VCC < 2.5V 4
Data input setup time TSU:DAT 100 ns 2.5V ≤ VCC ≤ 5.5V 4
Stop condition setup time TSU:STO 4000 ns 1.8V ≤ VCC < 2.5V 4
Stop condition setup time TSU:STO 600 ns 2.5V ≤ VCC ≤ 5.5V 4
Output valid from clock TAA 3500 ns 1.8V ≤ VCC < 2.5V 4
Output valid from clock TAA 900 ns 2.5V ≤ VCC ≤ 5.5V 4
Bus free time TBUF 4700 ns 1.8V ≤ VCC < 2.5V 4
Bus free time TBUF 1300 ns 2.5V ≤ VCC ≤ 5.5V 4
Input filter spike suppression (SDA and SCL) TSP 50 ns Note 1 4
Oscillator timeout period TOSF 1 ms Note 1 4
Supply voltage VCC 6.5 V 3
All inputs and outputs (except SDA and SCL) w.r.t. VSS -0.6 V -0.6V to VCC +1.0V 3
SDA and SCL w.r.t. VSS -0.6 6.5 V 3
Storage temperature -65 150 °C 3
Ambient temperature with power applied -40 125 °C 3
Operating voltage range VCC 1.8 5.5 V Industrial (I) 3
Operating temperature TA -40 85 °C Industrial (I) 3
Oscillator pin capacitance (X1, X2) COSC 3 pF Note 1 3
Timekeeping current ICCT 1.2 µA VCC = 3.3V (Note 1) 3
Oscillator frequency FOSC 32.768 kHz 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 33

CAD (KiCad official)

  • Symbol: MCP7940M-I
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mcp7940m-i-etched.step / mcp7940m-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp7940m-i.step / mcp7940m-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (50 pp, sha256 618ec2c897719bef, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is MCP7940M-I/MS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • MCP7940M-I/SN
  • MCP7940M-I/ST