component
CI5930-05A
Public Made by Adomby adom
Tokmas Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownCI5930-05A
Tokmas · Current Sensors · SOP-8
CI5930-05A from Tokmas, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Primary current input terminal (IP+ pins 1-2 are internally tied); input current flowing from IP+ to IP- is defined as positive, and the pins are isolated 3500 VRMS from pins 5-8. |
| 2 | IP+ | passive | Primary current input terminal (IP+ pins 1-2 are internally tied); input current flowing from IP+ to IP- is defined as positive, and the pins are isolated 3500 VRMS from pins 5-8. |
| 3 | IP- | passive | Primary current return terminal (IP- pins 3-4 are internally tied); input current flows from IP+ to IP- and is sensed by the Hall element, with input current limited to 40 A continuous and 100 A peak for 3 s. |
| 4 | IP- | passive | Primary current return terminal (IP- pins 3-4 are internally tied); input current flows from IP+ to IP- and is sensed by the Hall element, with input current limited to 40 A continuous and 100 A peak for 3 s. |
| 5 | GND | power_in | Ground reference for the device; the input voltages on IP+ and IP- are specified relative to this pin. |
| 6 | VZCR | output | Zero current reference signal output with an internal benchmark of 2.470 to 2.530 V (2.500 V typ), limited to 400 µA source and 3000 µA sink current. |
| 7 | OUT | output | Analog voltage output where VOUT = VCC/2 + 0.400 × IP(A) for the 5A variant (400 mV/A), with source current limited to 6 mA, sink current to 30 mA, output capacitive load at most 1 nF and resistive load at least 1.5 kΩ. |
| 8 | VCC | power_in | Single power supply input with a recommended range of 4.5 V to 5.5 V (5 V typ) and an absolute maximum of 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Tokmas |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply | VCC | 4.5 | 5.5 | V | 4 | ||
| Output Capacitance Load | CL | 1 | nF | 4 | |||
| Output Resistive Load | RL | 1.5 | kΩ | 4 | |||
| Res. of Primary Conductor | RP | 0.9 | 1.2 | mΩ | IP=2A | 4 | |
| Rise Time | tr | 1 | 2.2 | μs | 4 | ||
| Common Mode Rejection Ratio | CMRR | 38 | dB | 4 | |||
| Bandwidth | BW | 250 | kHz | -3dB | 4 | ||
| Reference Output Source Current | IZCR(SOURCE) | 400 | μA | 4 | |||
| Reference Output Sink Current | IZCR(SINK) | 3000 | μA | 4 | |||
| Nonlinearity | LinERR | 0.1 | 0.5 | % | 4 | ||
| Symmetry | SymERR | 0.5 | 1.5 | % | 4 | ||
| Supply Current | ICC | 20 | 25 | mA | OUT pin floated | 4 | |
| Internal benchmark | VZCR | 2.47 | 2.5 | 2.53 | V | 4 | |
| Zero Current Output Voltage | VOUT(Q) | 2.49 | 2.5 | 2.51 | V | IP=0 | 4 |
| Input voltage | VIN+, VIN- | -600 | 600 | VPK | Relative to pin 5 (GND), Note 1 | 4 | |
| Input current (DC / AC RMS) | IP | -50 | 50 | A | Decrease due to higher ambient temperature, Note 2 | 4 | |
| Power Supply | VCC | 4.5 | 5.5 | V | 4 | ||
| Operation Temperature | TA | -40 | 125 | °C | 4 | ||
| Power Supply | VCC | 7 | V | 3 | |||
| Output Voltage | VOUT | -0.3 | V | Printed as VCC+0.3 upper limit | 3 | ||
| Output Source Current | IOUT(SOURCE) | 6 | mA | 3 | |||
| Output Sink Current | IOUT(SINK) | 30 | mA | 3 | |||
| Input current peak current | IPEAK | 100 | A | 3 s | 3 | ||
| Input current continuous current | ICON | 40 | A | 3 | |||
| Isolation Voltage | VISO | 3500 | VAC | 3 | |||
| Operating Ambient Temperature | Ta | -40 | 125 | °C | 3 | ||
| Junction Temperature | TJ | 165 | °C | 3 | |||
| Storage Temperature | TS | -55 | 150 | °C | 3 | ||
| Electrostatic Discharge Voltage (HBM) | ESD(HBM) | 4000 | V | 3 | |||
| Current Accuracy Range | IP | -5 | 5 | A | 5 | ||
| Sensitivity | Sens | 388 | 400 | 412 | mV/A | full range of IP | 5 |
| Zero Current Differential Output Error | VOE | -45 | 45 | mV | 5 | ||
| Total Output Error | ETOT | -3 | 3 | % | 5 | ||
| Power-on Time | TPOR | 10 | μs | Output rising from 0 to 90% of steady-state | 4 | ||
| Noise | VNOISE(P-P) | 70 | mV | 5 | |||
| Zero Current Output Slope | ΔVOUT(Q) | 0.34 | mV/℃ | 5 | |||
| Sensitivity Slope | ΔSENS | 0.03 | mV/A /℃ | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | The typical resistance of the primary current input conductor at 25 ° C is 0.9 mΩ. The lead frame is made of copper. The temperature | 9 |
CAD (KiCad official)
- Symbol:
CI5930-05A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ci5930-05a-etched.step/ci5930-05a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ci5930-05a.step/ci5930-05a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Tokmas datasheet (20 pp, sha256
6eb28447a4a23740, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).