LMC6482AIMX from Texas Instruments, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUTA	output	Output of amplifier A. Rail-to-rail output swing, guaranteed within 20 mV of supply rails at 100 kΩ load; drives loads down to 600 Ω. Short-circuit current typ ±20 mA at V+=5 V.
2	-INA	input	Inverting input of amplifier A. Rail-to-rail common-mode input range from V−−0.25 V to V++0.25 V (CMRR≥50dB). Ultra-low input current 20 fA typical.
3	+INA	input	Non-inverting input of amplifier A. Rail-to-rail common-mode input range from V−−0.25 V to V++0.25 V. Input capacitance 3 pF, input resistance >10 TΩ.
4	V-	power_in	Negative supply rail. Supply voltage V+ − V− up to 16 V absolute max (3.0 V ≤ V+ ≤ 15.5 V operating); typically GND in single-supply operation.
5	+INB	input	Non-inverting input of amplifier B. Rail-to-rail common-mode input range from V−−0.25 V to V++0.25 V.
6	-INB	input	Inverting input of amplifier B. Rail-to-rail common-mode input range from V−−0.25 V to V++0.25 V. Ultra-low input current 20 fA typical.
7	OUTB	output	Output of amplifier B. Rail-to-rail output swing, guaranteed within 20 mV of supply rails at 100 kΩ load; drives loads down to 600 Ω.
8	V+	power_in	Positive supply rail. Operating range 3.0 V ≤ V+ ≤ 15.5 V; absolute max V+ − V− = 16 V. Supply current 1.0 mA typical (both amplifiers, V+=5 V).

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	SOIC-8-150mil
Category	Op-amp/Cmp
Pins	8

Ordering variants

Same part, different packaging or reel option.

LMC6482AIMX
LMC6482AIMXM
LMC6482AIMXAIN
LMC6482AIMXIN
LMC6482AIMXN
LMC6482AIMXAIMM
LMC6482AIMXAIMMX
LMC6482AIMXIMM
LMC6482AIMXIMMX
LMC6482AIMXMM
LMC6482AIMXMMX

CAD (KiCad official)

Symbol: LMC6482AIMX
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8-150mil (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`lmc6482aimx.step`	122 KB	You want the bare part, or you mark your own boards.
`lmc6482aimx-etched.step`	2.1 MB	You want the part with `LMC6482AIMX` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 523 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (33 pp, sha256 f2504e10b171a8a0, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF