component
LM293N
Public Made by Adomby adom
HGSEMI Comparators, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM293N
HGSEMI · Comparators · DIP-8
LM293N from HGSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Channel 1 open-drain output, with typical VOL of 0.1V at IOL=4mA. |
| 2 | 1IN- | input | Channel 1 inverting (negative) input, common-mode range 0 to VCC-1.5V. |
| 3 | 1IN+ | input | Channel 1 non-inverting (positive) input, common-mode range 0 to VCC-1.5V. |
| 4 | VEE | power_in | Negative supply, connected to GND in single-supply operation (dual supply down to -16V). |
| 5 | 2IN+ | input | Channel 2 non-inverting (positive) input, common-mode range 0 to VCC-1.5V. |
| 6 | 2IN- | input | Channel 2 inverting (negative) input, common-mode range 0 to VCC-1.5V. |
| 7 | 2OUT | output | Channel 2 open-drain output, with typical VOL of 0.1V at IOL=4mA. |
| 8 | VCC | power_in | Positive supply, 2V to 32V single supply (absolute maximum 36V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | DIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 2 | 5 | mV | VCC=5V to 30V, VIC=VICR(Min), VO=1.4V, TA=25℃ | 4 | |
| Input offset voltage (TA=MIN~MAX) | VIO | 9 | mV | VCC=5V to 30V, VIC=VICR(Min), VO=1.4V, TA=MIN~MAX | 4 | ||
| Input offset current | IIO | 5 | 50 | nA | VO=1.4V, TA=25℃ | 4 | |
| Input offset current (TA=MIN~MAX) | IIO | 250 | nA | VO=1.4V, TA=MIN~MAX | 4 | ||
| Input bias current | IBIAS | 100 | 500 | nA | VO=1.4V | 4 | |
| Input common-mode voltage range | VICR | 0 | V | VCC=5V to 30V; max printed as VCC-1.5V | 4 | ||
| Input differential voltage range | VID | 0 | V | VCC=5V to 30V; max printed as VCC-1.5V | 4 | ||
| Output low voltage | VOL | 0.1 | 0.4 | V | VID=-1V, IOL=4mA | 4 | |
| Output leakage current | IOH | 1 | uA | VID=1V, VO=VCC=30V | 4 | ||
| Supply current | ICC | 0.6 | 2 | mA | VCC=5V, No load | 4 | |
| Supply current | ICC | 1 | 3 | mA | VCC=32V, No load | 4 | |
| Single supply operating voltage | VCC | 2 | 32 | V | VEE=0V(GND) | 4 | |
| Dual supply operating voltage | VS | -16 | 16 | V | VCC+, VEE- | 4 | |
| Supply voltage (single) | VCC | 36 | V | 3 | |||
| Supply voltage (dual) | VS | -18 | 18 | V | 3 | ||
| Differential input voltage | VIDR | -18 | 18 | V | Voltage difference between IN+ and IN- | 3 | |
| Common-mode input voltage | VICR | -0.3 | V | Max printed as VCC | 3 | ||
| Power dissipation | PD | 500 | mW | 3 | |||
| Operating temperature (LM293) | TA | -40 | 85 | ℃ | LM293 grade | 3 | |
| Storage temperature | TS | -65 | 150 | ℃ | 3 | ||
| Soldering temperature | TW | 260 | ℃ | 10s | 3 |
CAD (KiCad official)
- Symbol:
LM293N - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
lm293n-etched.step/lm293n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm293n.step/lm293n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (11 pp, sha256
8d7cc51ca8b6bc2a, retrieved 2026-10-15, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).