component
PCM6260QRTVRQ1
Public Made by Adomby adom
Texas Instruments ADCs/DACs - Special Purpose, WQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownPCM6260QRTVRQ1
Texas Instruments · ADCs/DACs - Special Purpose · WQFN-32-EP(5x5)
PCM6260QRTVRQ1 from Texas Instruments, in a WQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVDD | power_in | Analog power supply, 3.3 V nominal (3.0 V to 3.6 V recommended). |
| 2 | AREG | power_out | Analog on-chip regulator output voltage for analog supply, 1.8 V nominal. |
| 3 | BSTVDD | power_in | Boost converter supply voltage, 3.3 V nominal (3.0 V to 3.6 V recommended). |
| 4 | BSTSW | passive | Boost converter switch input. |
| 5 | BSTOUT | power_out | Boost converter output voltage. |
| 6 | MICBIAS | power_out | MICBIAS output, programmable output up to 9 V. |
| 7 | VREF | power_in | Analog reference voltage filter output. |
| 8 | AVSS | power_in | Analog ground; short this pin directly to the board ground plane. |
| 9 | IN1P | input | Analog input 1P pin. |
| 10 | IN1M | input | Analog input 1M pin. |
| 11 | IN2P | input | Analog input 2P pin. |
| 12 | IN2M | input | Analog input 2M pin. |
| 13 | IN3P | input | Analog input 3P pin. |
| 14 | IN3M | input | Analog input 3M pin. |
| 15 | IN4P | input | Analog input 4P pin. |
| 16 | IN4M | input | Analog input 4M pin. |
| 17 | IN5P | input | Analog input 5P pin. |
| 18 | IN5M | input | Analog input 5M pin. |
| 19 | IN6P | input | Analog input 6P pin. |
| 20 | IN6M | input | Analog input 6M pin. |
| 21 | VBAT_IN | input | Analog VBAT input monitoring pin used for input diagnostics; 0 V to 18 V recommended. |
| 22 | SHDNZ | input | Device hardware shutdown and reset, active low. |
| 23 | ADDR1_MISO | bidirectional | I2C slave address A1 pin in I2C operation; SPI slave output pin in SPI operation. |
| 24 | ADDR0_SCLK | input | I2C slave address A0 pin in I2C operation; SPI serial bit clock in SPI operation. |
| 25 | SCL_MOSI | input | I2C control bus clock pin in I2C operation; SPI slave input pin in SPI operation. |
| 26 | SDA_SSZ | bidirectional | I2C control bus data pin in I2C operation; SPI slave-select pin in SPI operation. |
| 27 | IOVDD | power_in | Digital I/O power supply, 1.8 V or 3.3 V nominal (1.65-1.95 V or 3.0-3.6 V recommended). |
| 28 | GPIO1 | bidirectional | General-purpose digital input/output 1 (multipurpose: daisy-chain input, audio data output, PLL input clock source, interrupt). |
| 29 | SDOUT | output | Audio serial data interface bus output. |
| 30 | BCLK | bidirectional | Audio serial data interface bus bit clock. |
| 31 | FSYNC | bidirectional | Audio serial data interface bus frame synchronization signal. |
| 32 | DREG | power_out | Digital regulator output voltage for digital core supply, 1.5 V nominal. |
| 33 | VSS | power_in | Exposed thermal pad shorted to internal device ground; short directly to the board ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-32-EP(5x5) |
| Category | Data Acquisition |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
PCM6260QRTVRQ1 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: WQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
pcm6260qrtvrq1-etched.step/pcm6260qrtvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pcm6260qrtvrq1.step/pcm6260qrtvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (158 pp, sha256
0331ab7b9d036a64, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).