Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

GC26L31S

SX-globalchip · LVDS ICs · SOP-16

GC26L31S from SX-globalchip, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1A input Channel 1 driver input.
2 1Y output Channel 1 driver Y output (three-state, high impedance when powered down or disabled).
3 1Z output Channel 1 driver Z output (three-state, complementary to Y, high impedance when powered down or disabled).
4 G input Active-high enable control input; together with GN enables all four drivers.
5 2Z output Channel 2 driver Z output (three-state, complementary to Y).
6 2Y output Channel 2 driver Y output (three-state).
7 2A input Channel 2 driver input.
8 GND power_in Ground.
9 3A input Channel 3 driver input.
10 3Y output Channel 3 driver Y output (three-state).
11 3Z output Channel 3 driver Z output (three-state, complementary to Y).
12 GN input Active-low (inverted) enable control input; together with G enables all four drivers.
13 4Z output Channel 4 driver Z output (three-state, complementary to Y).
14 4Y output Channel 4 driver Y output (three-state).
15 4A input Channel 4 driver input.
16 VCC power_in Power supply, 4.75 V to 5.25 V recommended (5 V nominal).

Key specifications

Parameter Value
Manufacturer SX-globalchip
Package SOP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input clamp voltage VIK -1.5 V II=-18mA 4
High-level output voltage VOH 2.5 3.4 V IOH=-20mA 4
Low-level output voltage VOL 0.5 V IOL=20mA 4
Three-state output current IOZ -20 uA VO=0.5V 4
Three-state output current IOZ 20 uA VO=2.5V 4
Input current II 0.1 mA VI=7V 4
High-level input current IIH 20 uA VI=2.7V 4
Low-level input current IIL -0.36 mA VI=0.4V 4
Output short-circuit current Ios -30 -150 mA 4
Supply current Icc 32 80 mA outputs disabled (关断输出) 4
Propagation delay low-to-high tPLH 26 40 ns CL=30pF, S1 and S2 open 4
Propagation delay high-to-low tPHL 16 40 ns CL=30pF, S1 and S2 open 4
Output enable time to high level tPZH 25 40 ns CL=30pF, RL=75 ohm 4
Output enable time to low level tPZL 37 50 ns CL=30pF, RL=180 ohm 4
Output disable time from high level tPHZ 21 30 ns CL=10pF, S1 and S2 closed 4
Output disable time from low level tPLZ 23 30 ns CL=10pF, S1 and S2 closed 4
Skew between rising and falling edge delay TSKEW 10 20 ns CL=30pF, S1 and S2 open 4
Supply voltage VCC 4.75 5 5.25 V 3
High-level input voltage VIH 2 V 3
Low-level input voltage VIL 0.8 V 3
High-level output current IOH -20 mA 3
Low-level output current IOL 20 mA 3
Operating temperature Ta -40 125 °C 3
Supply voltage (absolute maximum) VCC -0.3 7 V T=25℃ 3
Input voltage range -0.5 7 V T=25℃ 3
Operating temperature (absolute maximum) Top -45 135 °C T=25℃ 3
Junction temperature Tjmax -50 150 °C T=25℃ 3
Storage temperature Tstg -60 150 °C T=25℃ 3
ESD protection (human body model) ESD -2000 2000 V T=25℃ 3

CAD (KiCad official)

  • Symbol: GC26L31S
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: gc26l31s-etched.step / gc26l31s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gc26l31s.step / gc26l31s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SX-globalchip datasheet (10 pp, sha256 fa2f5e0cf7c0776e, retrieved 2026-10-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF