Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TL026CDR

Texas Instruments · Operational Amplifier · SOIC-8

TL026CDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN- input Negative differential input with input impedance of 10-30 kΩ and common-mode input voltage range of ±1 V.
2 REF OUT output Reference voltage output for AGC bias generation with output voltage of 1.3-1.5 V.
3 VCC+ power_in Positive supply voltage with operating range from +3 V to +8 V.
4 OUT- output Negative differential output with output impedance of 20 Ω and maximum peak-to-peak voltage swing of 3-4 V.
5 OUT+ output Positive differential output with output impedance of 20 Ω and maximum peak-to-peak voltage swing of 3-4 V.
6 VCC power_in Negative supply voltage with operating range from -3 V to -8 V.
7 AGC input Automatic gain control input with voltage range of approximately Vref ± 180 mV for 50 dB total gain change.
8 IN+ input Positive differential input with input impedance of 10-30 kΩ and common-mode input voltage range of ±1 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, VCC+ (see Note 1) VCC+ 8 V See Note 1 1
Supply voltage, VCC– (see Note 1) VCC- -8 V See Note 1 1
Differential input voltage -5 5 V 1
Common-mode input voltage -6 6 V 1
Output current -10 10 mA 1
Operating free-air temperature range TA 0 70 °C 1
Storage temperature range -65 150 °C 1
Lead temperature range 260 °C 1,6 mm (1/16 inch) from case for 10 seconds 1
Continuous total dissipation, D package 725 mW TA ≤ 25°C 1
Operating factor above TA = 25°C, D package 5.8 mW/°C Above TA = 25°C 1
Power rating at TA = 70°C, D package 464 mW TA = 70°C 1
Supply voltage, VCC+ VCC+ 3 6 8 V 2
Supply voltage, VCC– VCC- -3 -6 -8 V 2
Operating free-air temperature range TA 0 70 °C 2
Large-signal differential voltage amplification AVD 65 85 105 V/V VO(PP) = 3 V, RL = 2 kΩ 2
Voltage at REF OUT Vref 1.3 1.5 V Iref = –1 mA to 100 µA 2
Input offset current IIO 0.4 5 µA 2
Input bias current IIB 10 30 µA 2
Common-mode input voltage range VICR -1 1 V 2
Common-mode output voltage VOC 3.25 3.75 4.25 V RL = ∞ 2
Change in common-mode output voltage ∆VOC 300 mV VAGC = 0 to 2 V, RL = ∞ 2
Output offset voltage VOO 0.75 V VID = 0, RL = ∞ 2
Maximum peak-to-peak output voltage swing VO(PP) 3 4 V RL = 2 kΩ 2
Input resistance at AGC, IN+, or IN– ri 10 30 kΩ 2
Common-mode rejection ratio CMRR 86 dB VIC = ±1 V, f = 100 kHz 2
Common-mode rejection ratio CMRR 60 dB VIC = ±1 V, f = 5 mHz 2
Supply voltage rejection ratio (∆VCC / ∆VIO) kSVR 50 70 dB ∆VCC+ = ±0.5 V, ∆VCC– = ±0.5 V 2
Propagation delay time tpd 6 10 ns ∆VO = 1 V 2
Rise time tr 4.5 12 ns ∆VO = 1 V 2
Maximum output sink current Isink(max) 3 4 mA VID = 1 V, VO = 3 V 2
Supply current ICC 22 27 mA No load, No signal 2
Large-signal differential voltage amplification (over recommended operating free-air temperature range) AVD 55 115 V/V VO(PP) = 3 V, RL = 2 kΩ 3
Input offset current (over recommended operating free-air temperature range) IIO 6 µA 3
Input bias current (over recommended operating free-air temperature range) IIB 40 µA 3
Common-mode input voltage range (over recommended operating free-air temperature range) VICR -1 1 V 3
Output offset voltage (over recommended operating free-air temperature range) VOO 1.5 V VID = 0, RL = ∞ 3
Maximum peak-to-peak output voltage swing (over recommended operating free-air temperature range) VO(PP) 2.8 V RL = 2 kΩ 3
Input resistance at AGC, IN+, or IN– (over recommended operating free-air temperature range) ri 8 kΩ 3
Common-mode rejection ratio (over recommended operating free-air temperature range) CMRR 50 dB VIC = ±1 V, f = 100 kHz 3
Supply voltage rejection ratio (∆VCC / ∆VIO) (over recommended operating free-air temperature range) kSVR 50 dB ∆VCC+ = ±0.5 V, ∆VCC– = ±0.5 V 3
Maximum output sink current (over recommended operating free-air temperature range) Isink(max) 2.8 4 mA VID = 1 V, VO = 3 V 3
Supply current (over recommended operating free-air temperature range) ICC 30 mA No load, No signal 3
Differential voltage amplification change ∆AVD 50 dB VIPP = 28.5 mV, RL = 2 kΩ, VAGC – Vref = ±180 mV 2
3-dB bandwidth BW 50 MHz VO(PP) = 1 V, VAGC – Vref = ±180 mV 2
Output resistance ro 20 Ω 2
Broadband equivalent noise voltage Vn 12 µV BW = 1 kHz to 10 MHz 2

CAD (KiCad official)

  • Symbol: TL026CDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tl026cdr-etched.step / tl026cdr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl026cdr.step / tl026cdr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (20 pp, sha256 afc2f4dae958a6aa, retrieved 2026-09-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF