Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA219BIDR

Texas Instruments · Current Sense Amplifiers · SOIC-8

INA219BIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A1 input Address configuration pin for I2C/SMBus slave address selection; 16 possible addresses configurable via pin state.
2 A0 input Address configuration pin for I2C/SMBus slave address selection; 16 possible addresses configurable via pin state.
3 SDA bidirectional I2C/SMBus open-drain serial data line with output current sink capability to 10 mA.
4 SCL input I2C/SMBus serial clock line; input voltage range -0.3 to VS+0.3 V.
5 VS power_in Analog power supply input; operating range 3 to 5.5 V.
6 GND power_in Analog ground reference.
7 IN- input Negative differential shunt voltage input and bus voltage reference to ground; voltage range -0.3 to 26 V.
8 IN+ input Positive differential shunt voltage input connected to positive side of shunt resistor; voltage range -0.3 to 26 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Full-scale current sense (input) voltage range, PGA = /1 VSHUNT 0 40 mV PGA = /1 5
Full-scale current sense (input) voltage range, PGA = /2 VSHUNT 0 80 mV PGA = /2 5
Full-scale current sense (input) voltage range, PGA = /4 VSHUNT 0 160 mV PGA = /4 5
Full-scale current sense (input) voltage range, PGA = /8 VSHUNT 0 320 mV PGA = /8 5
Bus voltage (input voltage) range, BRNG = 1 0 32 V BRNG = 1 5
Bus voltage (input voltage) range, BRNG = 0 0 16 V BRNG = 0 5
Common-mode rejection CMRR 100 120 dB VIN+ = 0 to 26 V 5
Offset voltage, RTI, PGA = /1 VOS -50 10 50 μV PGA = /1 5
Offset voltage, RTI, PGA = /2 VOS -75 20 75 μV PGA = /2 5
Offset voltage, RTI, PGA = /4 VOS -75 30 75 μV PGA = /4 5
Offset voltage, RTI, PGA = /8 VOS -100 40 100 μV PGA = /8 5
Current sense gain error -40 40 m% 5
IN+ pin input leakage, power-down mode -0.5 0.1 0.5 μA Power-down mode 5
IN– pin input leakage, power-down mode -0.5 0.1 0.5 μA Power-down mode 5
Leakage input current (digital inputs) 0.1 1 μA 0 ≤ VIN ≤ VS 5
VIH input logic level VIH 6 V 5
VIL input logic level VIL -0.3 V 5
Logic 0 output level 0.15 0.4 V ISINK = 3 mA 6
High-level output leakage current 0.1 1 μA VOUT = VS 6
Operating supply range 3 5.5 V 6
Quiescent current 0.7 1 mA 6
Quiescent current, power-down mode 6 15 μA 6
Current measurement error -0.3 0.2 0.3 % 5
Current measurement error over temperature -0.5 0.5 % TA = –25°C to 85°C 5
Bus voltage measurement error -0.5 0.2 0.5 % 5
Bus voltage measurement error over temperature -1 1 % TA = –25°C to 85°C 5
ADC conversion time, 12 bit 532 586 μs 12 bit 5
ADC conversion time, 11 bit 276 304 μs 11 bit 5
ADC conversion time, 10 bit 148 163 μs 10 bit 5
ADC conversion time, 9 bit 84 93 μs 9 bit 5
SMBus timeout 28 35 ms 5
VS supply voltage VS 6 V 4
Analog inputs IN+, IN– differential (VIN+ – VIN–) -26 26 V 4
Analog inputs IN+, IN– common-mode (VIN+ + VIN–)/2 -0.3 26 V 4
SDA pin voltage 6 V 4
Input current into any pin 5 mA 4
Open-drain digital output current 10 mA 4
Operating temperature -40 125 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Operating free-air temperature range TA -25 85 ºC 4
Junction-to-ambient thermal resistance RθJA 111.3 °C/W D (SOIC) package 4
Junction-to-case (top) thermal resistance RθJC(top) 55.9 °C/W D (SOIC) package 4
Junction-to-board thermal resistance RθJB 52 °C/W D (SOIC) package 4
Junction-to-top characterization parameter ψJT 10.7 °C/W D (SOIC) package 4
Junction-to-board characterization parameter ψJB 51.5 °C/W D (SOIC) package 4

CAD (KiCad official)

  • Symbol: INA219BIDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ina219bidr-etched.step / ina219bidr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina219bidr.step / ina219bidr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 2c973858ed829073, retrieved 2026-09-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF