Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LTC4415IMSE#PBF

Analog Devices · Power Distribution Switches · MSOP-16-EP

LTC4415IMSE#PBF from Analog Devices, in a MSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN1 power_in Diode 1 anode and positive power supply for the LTC4415; bypass with a ceramic capacitor of at least 4.7µF, and pins 1 and 2 may be grounded when unused.
2 IN1 power_in Diode 1 anode and positive power supply for the LTC4415, fused to pin 1 on the package; bypass with a ceramic capacitor of at least 4.7µF, and it may be grounded when unused.
3 EN1 input Enable input for Diode 1; a high signal greater than VENTH (800mV typical) enables Diode 1.
4 CLIM1 bidirectional Current limit adjust and monitor pin for Diode 1; a resistor to ground sets the limit with RCLIM allowed from 125Ω to 1000Ω, the pin must not be left open, and it is limited to a fixed 6A when shorted to ground.
5 CLIM2 bidirectional Current limit adjust and monitor pin for Diode 2; a resistor to ground sets the limit with RCLIM allowed from 125Ω to 1000Ω, the pin must not be left open, and it is limited to a fixed 6A when shorted to ground.
6 EN2 input Enable input for Diode 2; a low signal less than VENTH (800mV typical) enables Diode 2.
7 IN2 power_in Diode 2 anode and positive power supply for the LTC4415; bypass with a ceramic capacitor of at least 4.7µF, and pins 7 and 8 may be grounded when unused.
8 IN2 power_in Diode 2 anode and positive power supply for the LTC4415, fused to pin 7 on the package; bypass with a ceramic capacitor of at least 4.7µF, and it may be grounded when unused.
9 OUT2 power_out Diode 2 cathode and output of the LTC4415; bypass with a ceramic capacitor of at least 4.7µF, and leave open when unused.
10 OUT2 power_out Diode 2 cathode and output of the LTC4415, fused to pin 9 on the package; bypass with a ceramic capacitor of at least 4.7µF, and leave open when unused.
11 STAT2 output Open-drain status output that pulls down during Diode 2 forward conduction; it may be left open or grounded when unused.
12 WARN2 output Open-drain overcurrent and thermal warning output for Diode 2 that pulls down when diode 2 current exceeds its current limit or die temperature is close to thermal shutdown.
13 WARN1 output Open-drain overcurrent and thermal warning output for Diode 1 that pulls down when diode 1 current exceeds its current limit or die temperature is close to thermal shutdown.
14 STAT1 output Open-drain status output that pulls down during Diode 1 forward conduction; it may be left open or grounded when unused.
15 OUT1 power_out Diode 1 cathode and output of the LTC4415; bypass with a ceramic capacitor of at least 4.7µF, and leave open when unused.
16 OUT1 power_out Diode 1 cathode and output of the LTC4415, fused to pin 15 on the package; bypass with a ceramic capacitor of at least 4.7µF, and leave open when unused.
17 GND power_in Device ground on the exposed pad; the exposed pad must be soldered to PCB ground for both electrical connection and thermal conductivity.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-16-EP
Category Power Management (PMIC)
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Supply Range VIN1, VOUT1, VIN2, VOUT2 1.7 5.5 V At Least One Input/Output Must Be in This Range 3
Undervoltage Lockout rising VUVLO 1.63 1.7 V VINx Rising 3
Undervoltage Lockout Hysteresis VUVLO 55 mV 3
Quiescent Current In Forward Regulation IQF 44 80 µA VIN1 = VEN1 = VEN2 = 3.6V, IOUT1 = -1mA, VIN2 = VOUT2 = 0V, Measured Through GND Pin 3
Quiescent Current In Shutdown IQOFF 13 28 µA VIN1 = VIN2 = VEN2 = 3.6V, VEN1 = 0V, VOUT1 = VOUT2 = 0V, Measured Through GND Pin 3
Reverse Turn-Off Current: OUT1 IQR(OUT) 18 40 µA VIN1 = 3.6V, VOUT1 = 3.7V, VIN2 = 3.5V, VOUT2 = 3.6V (VOUT1 > VOUT2) 3
Reverse Turn-Off Current: OUT2 IQR(OUT) 5 11 µA VIN1 = 3.6V, VOUT1 = 3.7V, VIN2 = 3.5V, VOUT2 = 3.6V (VOUT1 > VOUT2) 3
INx Pin Current In Reverse Turn-Off IQR(IN) 4 10 µA VOUT1 = VOUT2 = 5.5V 3
INx Pin Leakage Current ILEAK(IN) -1 1 µA VIN1 = VIN2 = 0V, VOUT1 = VOUT2 = 5.5V 3
Forward Regulation Voltage (VINx, VOUTx) VFR 5 15 25 mV IOUTx = -1mA 3
Reverse Turn-Off Voltage (VINx, VOUTx) VRTO -50 -30 -10 mV 3
Forward Dynamic Resistance in Regulation RFR 18 30 mΩ IOUTx = -100mA to -300mA 3
On-Resistance in Constant Resistance Mode RON 50 70 mΩ IOUTx = -1A 3
PowerPath Turn-On Time, Diode 1 before enable VOUT1 = 1.5V tON 10 µs Before Enable VOUT1 = 1.5V, Diode 1 3
PowerPath Turn-On Time, Diode 2 before enable VOUT2 = 1.5V tON 23 µs Before Enable VOUT2 = 1.5V, Diode 2 3
PowerPath Turn-On Time before enable VOUTx = 0V tON 250 µs Before Enable VOUTx = 0V 3
PowerPath Turn-On from Shutdown, VOUTx = 1.5V tON(SD) 70 µs Both Diodes Disabled and VOUTx = 1.5V Before Enable 3
PowerPath Turn-On from Shutdown, VOUTx = 0V tON(SD) 320 µs Both Diodes Disabled and VOUTx = 0V Before Enable 3
PowerPath Switchover Time tSWITCH 9 µs VINx ↑ (2.6V to 4.6V) to VOUTx Starts Rising, Both Diodes Enabled, OUT1 and OUT2 Tied Together 3
PowerPath Turn-Off Time tOFF 2 µs Disable to IIN Falling from 100mA to 1mA 3
Soft-Start Duration tSS 2 ms VOUTx = 0V 3
Current Monitor Ratio at IOUTx = -4A ICLIMx /IOUTx 0.9 1 1.1 mA/A When IOUTx = -4A 3
Current Monitor Ratio at IOUTx = -2A ICLIMx /IOUTx 0.8 1 1.2 mA/A When IOUTx = -2A 3
CLIM Clamp Voltage In Current Limit VCLIM 0.5 V In Current Limit 3
Current Limit Adjustability ILIM(ADJ) 0.5 4 A 3
Accuracy of Adjustable Current Limit Threshold at 4A ILIM -8 8 % VOUTx = VINx, 0.5V, Current Limit = 4A 3
Accuracy of Adjustable Current Limit Threshold at 2A ILIM -15 15 % VOUTx = VINx, 0.5V, Current Limit = 2A 3
Internal Current Limit ILIM(INT) 4 6 9 A RCLIMx = 0Ω, VOUTx = 0V 3
Thermal Warning Threshold TWARN 130 °C Rising Temperature 3
Thermal Warning Hysteresis TWARN 15 °C 3
Thermal Shutdown Threshold TSD 160 °C Rising Temperature 3
Thermal Shutdown Hysteresis TSD 20 °C 3
Open-Drain Output Low Voltage VOL 0.05 0.4 V Current Into Open-Drain Output = 3mA 3
Open-Drain Output High Leakage Current 0 1 µA Open-Drain Output Voltage = 5.5V 3
STAT Turn-On Time, EN1 rising to STAT1 pull-down tSTAT(ON) 5 µs EN1 Rising to STAT1 Pull-Down 3
STAT Turn-On Time, EN2 falling to STAT2 pull-down tSTAT(ON) 18 µs EN2 Falling to STAT2 Pull-Down 3
STAT Turn-Off Time tSTAT(OFF) 2 µs Disable to STAT Pull-Up 4
WARN Turn-On Time tWARN(ON) 500 µs Current Limit to WARN Pull-Down 4
WARN Turn-Off Time tWARN(OFF) 5 µs Out of Current Limit to WARN Pull-Up 4
EN1 Rising and EN2 Falling Thresholds VENTH 760 800 840 mV 4
EN1 and EN2 Hysteresis VENHYST 55 mV 4
Enable Pin Current When Pulled High 0 1 µA VEN1 = VEN2 = 3.6V 4
Input and Output Operating Junction Temperature Range TJ -40 125 °C Notes 3, 4 2
IN1, IN2, OUT1, OUT2, CLIM1, CLIM2, STAT1, STAT2, WARN1, WARN2 Voltage -0.3 6 V 2
EN1, EN2 Voltage -0.3 V Max (VINx, VOUTx) 2
Storage Temperature Range -65 150 °C 2
Thermal Resistance Junction to Ambient, MSE package θJA 35 40 °C/W MSE package, printed as 35°C/W TO 40°C/W 2

CAD (KiCad official)

  • Symbol: LTC4415IMSE#PBF
  • Footprint: Package_SO:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm
  • 3D model: MSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: ltc4415imse-etched.step / ltc4415imse-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc4415imse.step / ltc4415imse.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 e35970b1d556a4ba, retrieved 2026-11-19)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF