Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HCPL-0611-000E

Broadcom/AVAGO · Logic Output Optoisolators · SOIC-8

HCPL-0611-000E from Broadcom/AVAGO, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection (marked NC in the functional diagram for the single-channel SO-8 family).
2 ANODE passive LED anode input; the schematic shows the LED forward current IF flowing from pin 2 to pin 3.
3 CATHODE passive LED cathode connection, paired with anode pin 2 to drive the internal GaAsP LED.
4 NC unconnected No internal connection (marked NC in the functional diagram for the single-channel SO-8 family).
5 GND power_in Ground reference for the detector IC; a 0.1-µF bypass capacitor must be connected as close as possible between pins 5 and 8.
6 VO output Output of the detector IC, an open-collector Schottky-clamped transistor with TTL/LSTTL compatibility.
7 VE input Enable input that strobes the detector: when low the output is held high, and when high the output follows the LED state (low with LED on, high with LED off).
8 VCC power_in Detector supply pin; a 0.1-µF bypass capacitor must be connected as close as possible between pins 5 and 8.

Key specifications

Parameter Value
Manufacturer Broadcom/AVAGO
Package SOIC-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Current, Low Level IFL 0 250 µA 15
Input Current, High Level IFH 5 15 mA 15
Power Supply Voltage VCC 4.5 5.5 V 15
Low Level Enable Voltage (single channel products only) VEL 0 0.8 V 15
High Level Enable Voltage (single channel products only) VEH 2 V max printed as VCC 15
Operating Temperature TA -40 85 °C 15
Fan Out (at RL = 1 k) N 5 TTL Loads at RL = 1 k 15
Output Pull-up Resistor (minimum) RL 330 Ω 15
Output Pull-up Resistor (maximum) RL 4 kΩ 15
High Level Output Current IOH 5.5 100 µA VCC = 5.5V, VE = 2.0V; VO = 5.5V, IF = 250 mA 16
Low Level Output Voltage (8-Pin DIP, SO-8) VOL 0.35 0.6 V VCC = 5.5V, VE = 2.0V, IF = 5 mA, IOL (Sinking) = 13 mA 16
High Level Supply Current (Single Channel) ICCH 7 10 mA VE = 0.5V VCC = 5.5V, IF = 0 mA 16
Low Level Supply Current (Single Channel) ICCL 9 13 mA VE = 0.5V, VCC = 5.5V, IF = 10 mA 16
High Level Enable Current (Single Channel) IEH -0.7 -1.6 mA VCC = 5.5V, VE = 2.0V 16
Low Level Enable Current IEL -0.9 -1.6 mA VCC = 5.5V, VE = 0.5V 16
High Level Enable Voltage VEH 2 V 16
Low Level Enable Voltage VEL 0.8 V 16
Input Forward Voltage (SO-8) VF 1.3 1.8 V IF = 10 mA 16
Input Reverse Breakdown Voltage (8-Pin DIP, SO-8) BVR 5 V IR = 10 µA 17
Propagation Delay Time to High Output Level tPLH 20 48 75 ns TA = 25°C, RL = 350, CL = 15 pF 18
Propagation Delay Time to Low Output Level tPHL 25 50 75 ns TA = 25°C, RL = 350, CL = 15 pF 18
Pulse Width Distortion (8-Pin DIP, SO-8) /tPHL, tPLH/ 3.5 35 ns RL = 350, CL = 15 pF 18
Propagation Delay Skew tPSK 40 ns RL = 350, CL = 15 pF 18
Logic High Common Mode Transient Immunity (HCPL-0611) /CMH/ 15000 25000 V/µs /VCM/ = 1 kV 19
Logic Low Common Mode Transient Immunity (HCPL-0611) /CML/ 15000 25000 V/µs /VCM/ = 1 kV 19
Input-Output Insulation Leakage Current (Single SO-8) II-O 1 µA 45% RH, t = 5s, VI-O = 3 kVdc, TA = 25°C 20
Input-Output Momentary Withstand Voltage (8-Pin DIP, SO-8) VISO 3750 Vrms RH 50%, t = 1 min, TA = 25°C 20
Storage Temperature TS -55 125 °C 14
Operating Temperature TA -40 85 °C 14
Average Forward Input Current (Single SO-8) IF 20 mA Peaking transient up to 50 mA, 50 ns max pulse width, provided average current does not exceed 20 mA 14
Reverse Input Voltage (8-Pin DIP, SO-8) VR 5 V 14
Supply Voltage (1 Minute Maximum) VCC 7 V 1 minute maximum 14
Enable Input Current IE 5 mA 14
Output Collector Current IO 50 mA 14
Output Collector Voltage VO 7 V 14
Output Collector Power Dissipation (Single SO-8) PO 85 mW 14

CAD (KiCad official)

  • Symbol: HCPL-0611-000E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: hcpl-0611-000e-etched.step / hcpl-0611-000e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcpl-0611-000e.step / hcpl-0611-000e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom/AVAGO datasheet (31 pp, sha256 96d2bfe698febfbf, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF