XRA1200PIG16TR-F from MaxLinear, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	A0	input	I2C slave address select input; see Table 1 for the address map (tie to GND, VCC, SCL or SDA).
2	A1	input	I2C slave address select input; see Table 1 for the address map (tie to GND, VCC, SCL or SDA).
3	A2	input	I2C slave address select input; see Table 1 for the address map (tie to GND, VCC, SCL or SDA).
4	P0	bidirectional	General purpose I/O P0, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P.
5	P1	bidirectional	General purpose I/O P1, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P.
6	P2	bidirectional	General purpose I/O P2, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P.
7	P3	bidirectional	General purpose I/O P3, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P.
8	GND	power_in	Power supply common, ground.
9	P4	bidirectional	General purpose I/O P4, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P.
10	P5	bidirectional	General purpose I/O P5, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P.
11	P6	bidirectional	General purpose I/O P6, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P.
12	P7	bidirectional	General purpose I/O P7, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P.
13	IRQ#	output	Interrupt output (open-drain, active LOW).
14	SCL	input	I2C-bus serial input clock.
15	SDA	bidirectional	I2C-bus data input/output (open-drain).
16	VCC	power_in	1.65V to 3.6V VCC supply voltage.

Key specifications

Parameter	Value
Manufacturer	MaxLinear
Package	TSSOP-16
Category	Interface ICs
Pins	16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Power supply voltage	VCC			3.6	V		10
Supply current				160	mA		10
Ground current				200	mA		10
External current limit of each GPIO				25	mA		10
Total current limit for GPIO[7:0]				100	mA		10
Total supply current sourced by all GPIOs				160	mA		10
Operating Temperature		-40		85	°C		10
Storage Temperature		-65		150	°C		10
Power Dissipation				200	mW		10
Thermal resistance junction-ambient (16-TSSOP)	theta-ja		105		°C/W	Typical, margin of error ±15%	10
Thermal resistance junction-case (16-TSSOP)	theta-jc		20		°C/W	Typical, margin of error ±15%	10
Operating voltage	VCC	1.65		3.6	V		1
Operating temperature range	TA	-40		85	°C		2
Input Low Voltage (I2C SDA, SCL)	VIL	-0.3			V	Note 1; max 0.3VCC for all three columns	11
Input Low Voltage (GPIOs, A0-A2), 1.8V ±10%	VIL	-0.3		0.2	V	Note 2; 1.8V ±10%	11
Input Low Voltage (GPIOs, A0-A2), 2.5V ±10%	VIL	-0.3		0.5	V	Note 2; 2.5V ±10%	11
Input Low Voltage (GPIOs, A0-A2), 3.3V ±10%	VIL	-0.3		0.8	V	Note 2; 3.3V ±10%	11
Input High Voltage (I2C SDA, SCL), 1.8V ±10%	VIH	1.3			V	Note 1; 1.8V ±10%; max VCC	11
Input High Voltage (I2C SDA, SCL), 2.5V ±10%	VIH	1.8			V	Note 1; 2.5V ±10%; max VCC	11
Input High Voltage (I2C SDA, SCL), 3.3V ±10%	VIH	2.3			V	Note 1; 3.3V ±10%; max VCC	11
Input High Voltage (GPIOs, A0-A2), 1.8V ±10%	VIH	1.4		5.5	V	Note 2; 1.8V ±10%	11
Input High Voltage (GPIOs, A0-A2), 2.5V ±10%	VIH	1.8		5.5	V	Note 2; 2.5V ±10%	11
Input High Voltage (GPIOs, A0-A2), 3.3V ±10%	VIH	2		5.5	V	Note 2; 3.3V ±10%	11
Output Low Voltage (SDA)	VOL			0.4	V	IOL = 3 mA; Note 3; all three columns	11
Output Low Voltage (GPIOs)	VOL			0.5	V	IOL = 8 mA; Note 4; all three columns	11
Output Low Voltage (IRQ#), 1.8V ±10%	VOL			0.4	V	IOL = 6 mA; Note 5; 1.8V ±10%	11
Output Low Voltage (IRQ#), 2.5V ±10%	VOL			0.4	V	IOL = 4 mA; Note 5; 2.5V ±10%	11
Output Low Voltage (IRQ#), 3.3V ±10%	VOL			0.4	V	IOL = 1.5 mA; Note 5; 3.3V ±10%	11
Output High Voltage (GPIOs), 1.8V ±10%	VOH	1.2			V	IOH = -8 mA; Note 4; 1.8V ±10%	11
Output High Voltage (GPIOs), 2.5V ±10%	VOH	1.8			V	IOH = -8 mA; Note 4; 2.5V ±10%	11
Output High Voltage (GPIOs), 3.3V ±10%	VOH	2.6			V	IOH = -8 mA; Note 4; 3.3V ±10%	11
Input Low Leakage Current	IIL	-10		10	uA	all three columns	11
Input High Leakage Current	IIH	-10		10	uA	all three columns	11
Power Supply Current, 1.8V ±10%	ICC			50	uA	Test 1; 1.8V ±10%	11
Power Supply Current, 2.5V ±10%	ICC			100	uA	Test 1; 2.5V ±10%	11
Power Supply Current, 3.3V ±10%	ICC			200	uA	Test 1; 3.3V ±10%	11
Power Supply Current, 1.8V ±10%	ICC			150	uA	Test 2; 1.8V ±10%	11
Power Supply Current, 2.5V ±10%	ICC			250	uA	Test 2; 2.5V ±10%	11
Power Supply Current, 3.3V ±10%	ICC			500	uA	Test 2; 3.3V ±10%	11
Standby Current, 1.8V ±10%	ICCS			1	uA	Test 3; 1.8V ±10%	11
Standby Current, 2.5V ±10%	ICCS			2	uA	Test 3; 2.5V ±10%	11
Standby Current, 3.3V ±10%	ICCS			5	uA	Test 3; 3.3V ±10%	11
Input Pin Capacitance	CIN			5	pF	all three columns	11
GPIO pull-up resistance	RGPIO	60	100	140	kΩ	100kΩ ± 40%; all three columns	11
Operating frequency, standard mode	fSCL	0		100	kHz	Standard mode	12
Operating frequency, fast mode	fSCL	0		400	kHz	Fast mode	12
Bus free time between STOP and START	TBUF	1.3			µs	Fast mode (standard mode min 4.7)	12
START condition hold time	THD;STA	0.6			µs	Fast mode (standard mode min 4.0)	12
START condition setup time	TSU;STA	0.6			µs	Fast mode (standard mode min 4.7)	12
Data setup time	TSU;DAT	150			ns	Fast mode (standard mode min 250)	12
Clock LOW period	TLOW	1.3			µs	Fast mode (standard mode min 4.7)	12
Clock HIGH period	THIGH	0.6			µs	Fast mode (standard mode min 4.0)	12
Clock/data fall time	TF			300	ns	Fast and standard mode	12
Clock/data rise time	TR			300	ns	Fast mode (standard mode max 1000)	12
Pulse width of spikes tolerance	TSP			50	ns	Fast and standard mode	12
I2C-bus GPIO output valid	TD1			0.2	µs	Fast and standard mode	12

CAD (KiCad official)

Symbol: XRA1200PIG16TR-F
Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
3D model: TSSOP-16 (KiCad packages3D, STEP)
3D model files: xra1200pig16tr-f-etched.step / xra1200pig16tr-f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xra1200pig16tr-f.step / xra1200pig16tr-f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: MaxLinear datasheet (16 pp, sha256 1e65aeb45ae1c889, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

XRA1200PIG16TR-F

Verified XRA1200PIG16TR-F

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README