component
DAC124S085CIMM
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDAC124S085CIMM
Texas Instruments · Digital To Analog Converters (DAC) · VSSOP-10-0.5mm
DAC124S085CIMM from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VA | power_in | Power supply input. Must be decoupled to GND. |
| 2 | VOUTA | output | Channel A analog output voltage. |
| 3 | VOUTB | output | Channel B analog output voltage. |
| 4 | VOUTC | output | Channel C analog output voltage. |
| 5 | VOUTD | output | Channel D analog output voltage. |
| 6 | GND | power_in | Ground reference for all on-chip circuitry. |
| 7 | VREFIN | input | Unbuffered reference voltage shared by all channels. Must be decoupled to GND. |
| 8 | DIN | input | Serial data input, clocked into the 16-bit shift register on falling edges of SCLK after the fall of SYNC. |
| 9 | SYNC | input | Frame synchronization input that enables the input shift register when brought low and acts as interrupt on rising edge if brought high before 16th clock cycle. |
| 10 | SCLK | input | Serial clock input; data is clocked into the input shift register on falling edges of this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Data Acquisition |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
DAC124S085CIMM - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
dac124s085cimm-etched.step/dac124s085cimm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dac124s085cimm.step/dac124s085cimm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
5f285252a1a8ac00, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).