component
TLV70033DDCR-HXY
Public Made by Adomby adom
HXY MOSFET Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV70033DDCR-HXY
HXY MOSFET · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
TLV70033DDCR-HXY from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Regulator input; datasheet gives input voltage up to 6.5V (absolute maximum -0.3 to +8V) and recommends a 10uF input capacitor between VIN and VSS. |
| 2 | GND | power_in | Ground reference (VSS) for the regulator. |
| 3 | CE | input | ON/OFF control input; logic high is at least 1.5V and logic low is at most 0.4V at VIN=5.0V, any series resistor must be under 10K, and when low the output is pulled down by the fast-discharge channel. |
| 4 | NC | unconnected | No connect. |
| 5 | VOUT | power_out | Regulated output, up to 300mA with Vin-Vout=1V, with at least 10uF output capacitor placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (features list: tolerance) | Vout | -2 | 2 | % | 1 | ||
| Output voltage accuracy (2.5V≤Vout≤5V; 3.3V variant) | Vout | 0.98 | 1.02 | ×Vout | 2.5V≤Vout≤5V, Vin=Vout+1V, 1.0mA≤Iout≤300mA; printed as Vout×0.98 / Vout×1.02 | 3 | |
| Output voltage temperature coefficient | △Vout/(Ta·Vout) | -100 | 100 | Ppm/℃ | Iout=30mA, 0℃≤Ta≤70℃ | 3 | |
| Line regulation | △Vout1/(△Vin·Vout) | 0.05 | 0.2 | %/V | 4.3V≤Vin≤8V, Iout=10mA | 3 | |
| Load regulation | △Vout | 15 | 40 | mV | Vin=4.3V, 1.0mA≤Iout≤100mA | 3 | |
| Supply current | Iss | 10 | 15 | uA | 3 | ||
| Input voltage | Vin | 6.5 | V | 3 | |||
| EN logic high voltage | VENH | 1.5 | V | VIN=5.0V | 3 | ||
| EN logic low voltage | VENL | 0.4 | V | VIN=5.0V | 3 | ||
| Supply voltage (absolute maximum) | VIN | -0.3 | 8 | V | 2 | ||
| Storage temperature range | STG | -50 | 125 | °C | 2 | ||
| Operating temperature range | TA | -40 | 85 | °C | 2 | ||
| Thermal resistance, junction to ambient, SOT-23-5L | θJA | 260 | °C/W | 2 | |||
| Power dissipation, SOT-23-5L | PW | 0.4 | W | 2 |
CAD (KiCad official)
- Symbol:
TLV70033DDCR-HXY - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
tlv70033ddcr-hxy-etched.step/tlv70033ddcr-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv70033ddcr-hxy.step/tlv70033ddcr-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (6 pp, sha256
3a56b09c20ff0530, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).