component
UCC2801DTR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownUCC2801DTR
Texas Instruments · AC-DC Controllers And Regulators · SOIC-8
UCC2801DTR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | COMP is the error amplifier output and PWM comparator input; it is a low-output-impedance amplifier that can source and sink current, and forcing it to GND gives zero duty cycle. |
| 2 | FB | input | FB is the inverting input of the error amplifier, and its trace should be kept as short as possible with minimal stray capacitance for best stability. |
| 3 | CS | input | CS is the input to the PWM comparator and the over-current comparator, with an internal 100 ns leading-edge blanking; the over-current threshold is 1.55 V typical and the cycle-by-cycle current limit is 1 V typical. |
| 4 | RC | input | RC is the oscillator timing pin, with a timing resistor from REF to RC (recommended 10 kΩ to 200 kΩ, never below 10 kΩ) and a timing capacitor from RC to GND (recommended 100 pF to 1000 pF). |
| 5 | GND | power_in | GND is the reference and power ground for all functions on the device, and the datasheet recommends separating signal return and high-current gate-driver paths. |
| 6 | OUT | output | OUT is the high-current power driver output for MOSFET gates, capable of driving peak currents above ±750 mA, and it is actively held low when VCC is below its threshold. |
| 7 | VCC | power_in | VCC is the device supply input, which should be fed through a current-limiting resistor and bypassed with at least 1 µF in parallel with a 0.1 µF ceramic capacitor; the absolute maximum is 12 V from a low-impedance source, with an internal zener clamp typically at 13.5 V. |
| 8 | REF | output | REF is the 5 V voltage reference for the error amplifier and other internal circuits, which must be bypassed to GND with at least a 0.1 µF ceramic capacitor placed close to the pin, and external loads above 2.5 mA require additional bypassing. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
UCC2801DTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ucc2801dtr-etched.step/ucc2801dtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc2801dtr.step/ucc2801dtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (59 pp, sha256
3f7e3ad23bdb4f2f, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).