Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPV6823S-TR

3PEAK · IC · SOT-23-5

TPV6823S-TR from 3PEAK, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RESET output Active-low reset push-pull output stage, asserted whenever VCC is below the reset threshold VTH (2.93 V typ for the TPV6823S).
2 GND power_in Ground reference for the supervisor.
3 MR input Active-low manual reset input with an internal 65 kΩ pull-up; it must be forced low for at least 1 μs to generate a reset, and glitches shorter than 100 ns are rejected.
4 WDI input Watchdog input that generates a reset if its voltage stays low or high for the full watchdog timeout (1.6 s typ); a logic transition on the pin clears the timer, and leaving it floating or three-stating the driver disables the watchdog.
5 VCC power_in Power supply voltage monitored by the supervisor; the datasheet gives an operating range of 1 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer 3PEAK
Package SOT-23-5
Category
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Operating Voltage Range VCC 1 5.5 V 6
Input Voltage (VCC) VCC -0.3 6 V 5
Output Current RESET 20 mA 5
TJ Maximum Junction Temperature TJ -40 125 °C 5
TSTG Storage Temperature Range TSTG -65 150 °C 5
TL Lead Temperature TL 260 °C Soldering 10 sec 5
Reset Threshold Voltage (TPV6823S) VTH 2.85 2.93 3 V 6
Supply Current (VCC = 1.8 V) ICC 2.2 10 μA WDI and MR unconnected (VCC = 1.8 V) 6
Supply Current (VCC = 5 V) ICC 6 25 μA WDI and MR unconnected (VCC = 5 V) 6
Reset Output Voltage Low (Push-Pull) VOL 0.3 V VCC ≥ 1 V, ISINK = 50 μA 6
Reset Output Voltage High (Push-Pull Only) VOH 0.8 × VCC VCC ≥ 1.8 V, ISOURCE = 200 μA 6
Input Threshold Voltage Low for MR VIL_MR 0.3 × VCC 6
Input Threshold Voltage High for MR VIH_MR 0.7 × VCC 6
MR Input Pulse Width tPW_MR 1 μs 6
Reset Timeout Period tRP 140 200 280 ms 6
Watchdog Timeout Period tWD 1.12 1.6 2.4 s 6
WDI Pulse Width tPW_WD 50 ns 7
WDI Input Threshold VIL VIL_WD 0.3 × VCC 7
WDI Input Threshold VIH VIH_WD 0.7 × VCC 7
WDI Input Current (high) IWDI 50 μA VWDI = 3.6 V 7
WDI Input Current (low) IWDI -36 μA VWDI = 0, VCC = 3.6 V 7
Reset Threshold Hysteresis VHYS 1000 mV 6
MR Glitch Rejection tGR_MR 100 ns 6
MR to Reset Delay td_MR 400 ns 6
MR Pull-Up Resistance RPU_MR 65 kΩ 6
VCC To Reset Delay tRD 20 μs VTH, VCC = 100 mV 6
Reset Threshold Temperature Coefficient 60 ppm/°C 6
Thermal Resistance Junction-to-Ambient (SOT23-5) θJA 128 °C/W 5
Thermal Resistance Junction-to-Case (SOT23-5) θJC 67 °C/W 5

CAD (KiCad official)

  • Symbol: TPV6823S-TR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tpv6823s-tr-etched.step / tpv6823s-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tpv6823s-tr.step / tpv6823s-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: 3PEAK datasheet (16 pp, sha256 f90cc2952b97ca3e, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF