component
MLX92232LSE-AAA-002-RE
Public Made by Adomby adom
Melexis Hall Switches, TSOT-23-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMLX92232LSE-AAA-002-RE
Melexis · Hall Switches · TSOT-23-3
MLX92232LSE-AAA-002-RE from Melexis, in a TSOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply voltage pin, operating from 2.7 V to 24 V with reverse supply voltage protection built in. |
| 2 | OUT | output | Open-drain output pin, protected by an output current limit (25 mA to 70 mA) with automatic shut-off during prolonged short-circuit. |
| 3 | GND | power_in | Ground pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | TSOT-23-3 |
| Category | Magnetic Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.7 | 24 | V | Operating | 5 | |
| Supply Current | IDD | 1.5 | 3 | 4.5 | mA | Note 2: valid for 92232LSE-AAA-xxx | 5 |
| Reverse supply current | IDDREV | -1 | mA | VDD = -16V | 5 | ||
| Output Saturation Voltage | VDSON | 0.3 | 0.5 | V | VDD = 3.5 to 24V, IOUT = 20mA | 5 | |
| Output Leakage | IOFF | 10 | µA | VOUT = 12V, VDD = 12V | 5 | ||
| Output Rise Time | tR | 0.1 | 0.3 | 1 | µs | RPU = 1kΩ, VDD = 12V, VPU = 5V, CLOAD = 50pF to GND | 5 |
| Output Fall Time | tF | 0.1 | 0.3 | 1 | µs | RPU = 1kΩ, VDD = 12V, VPU = 5V, CLOAD = 50pF to GND | 5 |
| Power-On Time | tON | 40 | 70 | µs | VDD = 5V, dVDD/dt > 2V/us | 5 | |
| Output Current Limit | ICL | 25 | 40 | 70 | mA | VDD = 3.5 to 24V, VOUT = 12V | 5 |
| Output ON Time under Current Limit conditions | tCLON | 150 | 240 | µs | VPU = 12V, RPU = 100Ω | 5 | |
| Output Jitter (p-p) | tJITTER | -3.2 | 3.2 | µs | Over 1000 successive switching events @10kHz triangle wave magnetic field, B > ±(BOPMAX +20mT) | 5 | |
| Maximum Switching Frequency | fSW | 30 | 65 | kHz | B > ±3(BOPMAX +1mT), triangle wave magnetic field | 5 | |
| Under-voltage Lockout Threshold | VUVL | 2.7 | V | 5 | |||
| Latch Threshold Programming Range | BLTH | 0.4 | 80 | mT | VDD=12V, TA=25°C | 6 | |
| Switch Operating Point Programming Range | BOP | 1.5 | 66 | mT | VDD=12V, TA=25°C | 6 | |
| Proportional Hysteresis Ratio Programming | HYSRATIO | 0.1 | 0.55 | - | VDD=12V, TA=25°C | 6 | |
| Latch Sensor Magnetic Offset | BOFFSET | -0.5 | 0.5 | mT | TA=25°C | 6 | |
| Latch Sensor Magnetic Offset | BOFFSET | -0.9 | 0.9 | mT | TA=-40°C to 150°C | 6 | |
| Temperature Coefficient | TC | -1100 | ppm/°C | Latch with no IMC: BOP/BRP = ±28mT | 6 | ||
| Factory Programmed BOP, Switch | BOP | 26 | 28 | 30 | mT | VDD=12V, TA=25°C, target 28mT | 6 |
| Factory Programmed BRP, Switch | BRP | 19 | 21 | 23 | mT | VDD=12V, TA=25°C, target 28mT, HYSRATIO=0.25 | 6 |
| Supply Voltage | VDD | 27 | V | For maximum 1 hour | 4 | ||
| Supply Voltage (Load Dump) | VDD | 32 | V | For maximum 500ms | 4 | ||
| Supply Current | IDD | 20 | mA | For maximum 1 hour; including current through protection device | 4 | ||
| Supply Current | IDD | 50 | mA | For maximum 500ms; including current through protection device | 4 | ||
| Reverse Supply Voltage | VDDREV | -24 | V | For maximum 1 hour | 4 | ||
| Reverse Supply Voltage | VDDREV | -30 | V | For maximum 500ms | 4 | ||
| Reverse Supply Current | IDDREV | -20 | mA | For maximum 1 hour; through protection device | 4 | ||
| Reverse Supply Current | IDDREV | -50 | mA | For maximum 500ms; through protection device | 4 | ||
| Output Voltage | VOUT | 27 | V | For maximum 1 hour | 4 | ||
| Output Current | IOUT | 20 | mA | For maximum 1 hour; through protection device | 4 | ||
| Output Current | IOUT | 75 | mA | For maximum 500ms; for VOUT≤27V | 4 | ||
| Reverse Output Voltage | VOUTREV | -0.5 | V | 4 | |||
| Reverse Output Current | IOUTREV | -100 | mA | For maximum 1 hour | 4 | ||
| Maximum Junction Temperature | TJ | 165 | °C | For 1000 hours | 4 | ||
| Storage Temperature Range | Ts | -55 | 165 | °C | 4 | ||
| ESD Sensitivity, HBM | 4000 | V | Human Model according AEC-Q100-002 | 4 | |||
| ESD Sensitivity, CDM | 1000 | V | Charged Device Model according AEC-Q100-011 | 4 | |||
| Ambient Temperature (DC operating range) | TA | -40 | 150 | °C | DC Operating Parameters header: TA = -40°C to 150°C | 5 | |
| SE Package Thermal Resistance | RTHJA | 300 | °C/W | Single layer PCB, JEDEC standard test boards | 5 |
CAD (KiCad official)
- Symbol:
MLX92232LSE-AAA-002-RE - Footprint:
Package_TO_SOT_SMD:TSOT-23 - 3D model: TSOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
mlx92232lse-aaa-002-re-etched.step/mlx92232lse-aaa-002-re-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx92232lse-aaa-002-re.step/mlx92232lse-aaa-002-re.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (20 pp, sha256
8e5967c1ad5704da, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).