3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAC847CQ-7
Diodes Incorporated · Bipolar (BJT) · SOT-23-3
AC847CQ-7 from Diodes Incorporated, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B | input | Base; bottom-left lead in the top-view pin-out, controls the collector current of the NPN transistor. |
| 2 | E | passive | Emitter; bottom-right lead in the top-view pin-out, with VEBO limited to 6.0 V (AC847) or 5.0 V (AC848). |
| 3 | C | passive | Collector; single lead at the top in the top-view pin-out, rated for IC 100 mA continuous and 200 mA peak, VCEO 45 V (AC847) or 30 V (AC848). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23-3 |
| Category | Transistors/Thyristors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Base Voltage (AC847) | VCBO | 50 | V | 2 | |||
| Collector-Emitter Voltage (AC847) | VCEO | 45 | V | 2 | |||
| Emitter-Base Voltage (AC847) | VEBO | 6 | V | 2 | |||
| Continuous Collector Current | IC | 100 | mA | 2 | |||
| Peak Collector Current | ICM | 200 | mA | 2 | |||
| Peak Emitter Current | IEM | 200 | mA | 2 | |||
| Operating and Storage Temperature Range | TJ,TSTG | -65 | 150 | °C | 2 | ||
| Electrostatic Discharge, Human Body Model | ESD HBM | 4000 | V | JEDEC Class 3A | 2 | ||
| Electrostatic Discharge, Machine Model | ESD MM | 400 | V | JEDEC Class C | 2 | ||
| Power Dissipation | PD | 310 | mW | Note 6: minimum recommended pad layout, single-sided FR-4, still air | 2 | ||
| Power Dissipation | PD | 350 | mW | Note 7: 15mm × 15mm 1oz copper | 2 | ||
| Thermal Resistance, Junction to Ambient | RϴJA | 403 | °C/W | Note 6: minimum recommended pad layout, single-sided FR-4, still air | 2 | ||
| Thermal Resistance, Junction to Ambient | RϴJA | 357 | °C/W | Note 7: 15mm × 15mm 1oz copper | 2 | ||
| Thermal Resistance, Junction to Leads | RϴJL | 350 | °C/W | Junction to solder point (end of leads) | 2 | ||
| Collector-Base Breakdown Voltage (AC847) | BVCBO | 50 | V | IC = 10µA | 4 | ||
| Collector-Emitter Breakdown Voltage (AC847) | BVCEO | 45 | V | IC = 10mA | 4 | ||
| Emitter-Base Breakdown Voltage (AC847) | BVEBO | 6 | V | IE = 1µA | 4 | ||
| Collector Cutoff Current | ICBO | 15 | nA | VCB = 30V | 4 | ||
| Collector Cutoff Current | ICBO | 5 | µA | VCB = 30V, TJ = +150°C | 4 | ||
| Collector Emitter Cutoff Current | ICES | 15 | nA | VCE = 50V | 4 | ||
| Emitter Base Cutoff Current | IEBO | 100 | nA | VEB = 5V | 4 | ||
| DC Current Gain (AC847CQ) | hFE | 420 | 520 | 800 | IC = 2.0mA, VCE = 5V | 4 | |
| Collector-Emitter Saturation Voltage | VCE(SAT) | 90 | 250 | mV | IC = 10mA, IB = 0.5mA | 4 | |
| Collector-Emitter Saturation Voltage | VCE(SAT) | 200 | 600 | mV | IC = 100mA, IB = 5.0mA | 4 | |
| Base-Emitter Turn-On Voltage | VBE(ON) | 580 | 660 | 700 | mV | IC = 2mA, VCE = 5V | 4 |
| Base-Emitter Turn-On Voltage | VBE(ON) | 770 | mV | IC = 10mA, VCE = 5V | 4 | ||
| Base-Emitter Saturation Voltage | VBE(SAT) | 700 | mV | IC = 10mA, IB = 0.5mA | 4 | ||
| Base-Emitter Saturation Voltage | VBE(SAT) | 900 | mV | IC = 100mA, IB = 5mA | 4 | ||
| Transition Frequency | fT | 100 | 300 | MHz | VCE = 5V, IC = 10mA, f = 100MHz | 4 | |
| Noise Figure | NF | 2 | 10 | dB | VCE = 5V, IC = 200µA, RS = 2kΩ, f = 1kHz, Δf = 200Hz | 4 | |
| Small Signal Current Gain (AC847CQ) | hfe | 600 | IC = 2.0mA, VCE = 5V, f = 1.0kHz | 4 | |||
| Input Impedance (AC847CQ) | hie | 8.7 | kΩ | IC = 2.0mA, VCE = 5V, f = 1.0kHz | 4 | ||
| Output Admittance (AC847CQ) | hoe | 60 | µs | IC = 2.0mA, VCE = 5V, f = 1.0kHz | 4 | ||
| Output Capacitance | COBO | 3 | pF | VCB = 10V, f = 1.0MHz | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | • Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 | 1 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
AC847CQ-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 0.975 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ac847cq-7-etched.step/ac847cq-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ac847cq-7.step/ac847cq-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (7 pp, sha256
7bd852389266b22f, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).