Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS7A4901DRBT

Texas Instruments · Linear Voltage Regulators (LDO) · VSON-8-EP(3x3)

TPS7A4901DRBT from Texas Instruments, in a VSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Regulator output; a capacitor of 2.2 μF or greater must be tied from this pin to ground to ensure stability.
2 FB input Input to the error amplifier that sets the output voltage of the device.
3 NC unconnected Not internally connected; this pin can be left open or tied to GND.
4 GND power_in Ground reference for the device.
5 EN input Enable pin: the regulator is enabled when VEN ≥ VEN(high) and disabled when VEN ≤ VEN(low); it can be tied to IN if not used, with VEN ≤ VIN.
6 NR/SS passive Noise-reduction pin; an external capacitor here bypasses band-gap noise and also controls the soft-start function.
7 DNC unconnected Do not connect; do not route this pin to any electrical net, not even GND or IN.
8 IN power_in Input supply; the recommended input voltage range is 3 V to 35 V and the absolute maximum IN-to-GND voltage is 36 V.
9 PowerPAD passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSON-8-EP(3x3)
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
IN pin to GND pin voltage -0.3 36 V 5
OUT pin to GND pin voltage -0.3 33 V 5
OUT pin to IN pin voltage -36 0.3 V 5
FB pin to GND pin voltage -0.3 2 V 5
FB pin to IN pin voltage -36 0.3 V 5
EN pin to IN pin voltage -36 0.3 V 5
EN pin to GND pin voltage -0.3 36 V 5
NR/SS pin to IN pin voltage -36 0.3 V 5
NR/SS pin to GND pin voltage -0.3 2 V 5
Operating virtual junction temperature TJ -40 125 °C 5
Storage temperature Tstg -65 150 °C 5
Input supply voltage VIN 3 35 V 5
Enable supply voltage VEN 0 V 5
Output voltage VOUT 33 V 5
Output current IOUT 0 150 mA 5
Operating junction temperature TJ -40 125 °C 5
Input capacitor CIN 2.2 10 µF 5
Output capacitor COUT 2.2 10 µF 5
Noise reduction capacitor CNR 0 10 nF 5
Feed-forward capacitor CFF 0 10 nF 5
Input voltage range VIN 3 35 V 6
Internal reference VREF 1.176 1.188 1.212 V TJ = 25°C, VNR/SS = VREF 6
Output voltage range 33 V VIN ≥ VOUT(nom) + 1 V 6
Nominal accuracy -1.5 1.5 %VOUT TJ = 25°C, VIN = VOUT(nom) + 0.5 V 6
Overall accuracy -2.5 2.5 %VOUT VOUT(nom) + 1 V ≤ VIN ≤ 35 V, 1 mA ≤ IOUT ≤ 150 mA 6
Dropout voltage VDO 333 600 mV VIN = 95% VOUT(nom), IOUT = 150 mA 6
Current limit ILIM 220 309 500 mA VOUT = 90% VOUT(nom) 6
Ground current IGND 49 100 µA IOUT = 0 mA 6
Shutdown supply current ISHDN 0.8 3 µA VEN = 0.4 V 6
Feedback current IFB 3 100 nA 6
Enable current IEN 0.02 1 µA VEN = VIN = VOUT(nom) + 1 V 6
Enable current IEN 0.2 1 µA VEN = VIN = 35 V 6
Enable high-level voltage VEN(high) 2.1 V 6
Enable low-level voltage VEN(low) 0 0.4 V 6
Junction-to-ambient thermal resistance (DRB VSON-8) RθJA 47.7 °C/W 6
Junction-to-case (top) thermal resistance (DRB VSON-8) RθJC(top) 55.3 °C/W 6
Junction-to-board thermal resistance (DRB VSON-8) RθJB 23.3 °C/W 6
Junction-to-top characterization parameter (DRB VSON-8) ψJT 1.1 °C/W 6
Junction-to-board characterization parameter (DRB VSON-8) ψJB 23.5 °C/W 6
Junction-to-case (bottom) thermal resistance (DRB VSON-8) RθJC(bot) 7 °C/W 6

CAD (KiCad official)

  • Symbol: TPS7A4901DRBT
  • Footprint: Package_SON:VSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm
  • 3D model: VSON-8-EP(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal VQFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: tps7a4901drbt-etched.step / tps7a4901drbt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a4901drbt.step / tps7a4901drbt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 f69e957b22bcc2db, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF