3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLMV393M8-13
Diodes Incorporated · Comparators · MSOP-8
LMV393M8-13 from Diodes Incorporated, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Channel 1 open-collector output that requires an external pull-up resistor between 1 kΩ and 10 kΩ to the positive supply to switch properly. |
| 2 | 1IN- | input | Channel 1 inverting input whose common-mode input range extends from 0.1 V below the negative supply to within 0.8 V of the positive supply. |
| 3 | 1IN+ | input | Channel 1 non-inverting input whose common-mode input range extends from 0.1 V below the negative supply to within 0.8 V of the positive supply. |
| 4 | VEE | power_in | Negative chip supply voltage, used as GND, with VCC-VEE operating within 2.7 V to 5.5 V and an absolute maximum supply voltage of 5.5 V. |
| 5 | 2IN+ | input | Channel 2 non-inverting input whose common-mode input range extends from 0.1 V below the negative supply to within 0.8 V of the positive supply. |
| 6 | 2IN- | input | Channel 2 inverting input whose common-mode input range extends from 0.1 V below the negative supply to within 0.8 V of the positive supply. |
| 7 | 2OUT | output | Channel 2 open-collector output that requires an external pull-up resistor between 1 kΩ and 10 kΩ to the positive supply to switch properly. |
| 8 | VCC | power_in | Positive chip supply voltage, operating within 2.7 V to 5.5 V with an absolute maximum of 5.5 V, and a minimum 0.1 µF bypass capacitor is recommended close to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | MSOP-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC-VEE (recommended operating) | VCC -VEE | 2.7 | 5.5 | V | 2 | ||
| Operating ambient temperature range | TA | -40 | 125 | °C | 2 | ||
| Supply voltage VCC-VEE | VCC -VEE | 5.5 | V | 2 | |||
| ESD Human Body Model protection | ESD HBM | 6 | KV | 2 | |||
| ESD Machine Model protection | ESD MM | 200 | V | 2 | |||
| Storage temperature | TST | -65 | 150 | °C | 2 | ||
| Maximum junction temperature | TJ | 150 | °C | 2 | |||
| Input offset voltage (2.7V DC) | VOS | 1.7 | 7 | mV | 3 | ||
| Input bias current (2.7V DC) | IB | 10 | 250 | nA | 3 | ||
| Input bias current (2.7V DC, full temperature range) | IB | 400 | nA | TA = full range | 3 | ||
| Input offset current (2.7V DC) | IOS | 5 | 50 | nA | 3 | ||
| Input offset current (2.7V DC, full temperature range) | IOS | 150 | nA | TA = full range | 3 | ||
| Common-mode input voltage range (2.7V DC) | VCM | -0.1 | 2 | V | 3 | ||
| Output sink current (2.7V DC) | IO | 5 | 23 | mA | VO≤ 1.5V | 3 | |
| Output leakage current (2.7V DC, full temperature range) | IOL | 1 | µA | TA = full range | 3 | ||
| Supply current (2.7V DC, LMV393) | IS | 70 | 150 | uA | Both Comparators | 3 | |
| Input offset voltage (5V DC) | VOS | 1.7 | 7 | mV | 3 | ||
| Input offset voltage (5V DC, full temperature range) | VOS | 9 | mV | TA = full range | 3 | ||
| Input bias current (5V DC) | IB | 25 | 250 | nA | 3 | ||
| Input bias current (5V DC, full temperature range) | IB | 400 | nA | TA = full range | 3 | ||
| Input offset current (5V DC) | IOS | 2 | 50 | nA | 3 | ||
| Input offset current (5V DC, full temperature range) | IOS | 150 | nA | TA = full range | 3 | ||
| Common-mode input voltage range (5V DC) | VCM | -0.1 | 4.2 | V | 3 | ||
| Large signal differential voltage gain (5V DC) | AV | 20 | 50 | V/mV | 3 | ||
| Saturation voltage (5V DC) | VSAT | 200 | 400 | mV | ISINK ≤ 4mA | 3 | |
| Saturation voltage (5V DC, full temperature range) | VSAT | 700 | mV | ISINK ≤ 4mA, TA = full range | 3 | ||
| Output sink current (5V DC) | IO | 10 | 84 | mA | VO≤ 1.5V | 3 | |
| Output leakage current (5V DC, full temperature range) | IOL | 1 | µA | TA = full range | 3 | ||
| Supply current (5V DC, LMV393) | IS | 100 | 200 | uA | Both Comparators | 3 | |
| Supply current (5V DC, LMV393, full temperature range) | IS | 250 | uA | TA=full range | 3 | ||
| Thermal resistance junction-to-ambient, MSOP-8 | θJA | 180 | °C/W | Soldered directly on PC board, still air | 2 |
CAD (KiCad official)
- Symbol:
LMV393M8-13 - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lmv393m8-13-etched.step/lmv393m8-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmv393m8-13.step/lmv393m8-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (13 pp, sha256
8153c11648b9bf3d, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).