3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMKE04Z128VLH4
NXP Semicon · NXP MCU · LQFP-64(10x10)
MKE04Z128VLH4 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | GPIO port D bit 1 with default function DISABLED and alternates KBI0_P25, FTM2_CH3 and SPI1_MOSI; this pin is high-current drive when operated as output. |
| 2 | PTD0 | bidirectional | GPIO port D bit 0 with default function DISABLED and alternates KBI0_P24, FTM2_CH2 and SPI1_SCK; this pin is high-current drive when operated as output. |
| 3 | PTH7 | bidirectional | GPIO port H bit 7 with default function DISABLED and alternates KBI1_P31 and PWT_IN1. |
| 4 | PTH6 | bidirectional | GPIO port H bit 6 with default function DISABLED and alternate KBI1_P30. |
| 5 | PTE7 | bidirectional | GPIO port E bit 7 with default function DISABLED and alternates KBI1_P7, TCLK2 and FTM1_CH1. |
| 6 | PTH2 | bidirectional | GPIO port H bit 2 with default function DISABLED and alternates KBI1_P26, BUSOUT and FTM1_CH0. |
| 7 | VDD | power_in | Power supply pin VDD, which the datasheet lists as VDD in all ALT columns of the pinout table. |
| 8 | VDDA | power_in | Analog supply pin VDDA, internally connected to VREFH in 64-pin packages. |
| 9 | VREFL | power_in | ADC low reference voltage pin VREFL. |
| 10 | VSS/VSSA | power_in | Ground pin VSS/VSSA, with VSS and VSSA internally connected. |
| 11 | PTB7 | input | Default function EXTAL, the oscillator input, with alternates PTB7, KBI0_P15, I2C0_SCL and EXTAL. |
| 12 | PTB6 | passive | Default function XTAL, the oscillator output, with alternates PTB6, KBI0_P14, I2C0_SDA and XTAL. |
| 13 | PTI4 | bidirectional | GPIO port I bit 4 with default function DISABLED and alternate IRQ. |
| 14 | PTH1 | bidirectional | GPIO port H bit 1 with default function DISABLED and alternates KBI1_P25 and FTM2_CH1; this pin is high-current drive when operated as output. |
| 15 | PTH0 | bidirectional | GPIO port H bit 0 with default function DISABLED and alternates KBI1_P24 and FTM2_CH0; this pin is high-current drive when operated as output. |
| 16 | PTE6 | bidirectional | GPIO port E bit 6 with default function DISABLED and alternate KBI1_P6. |
| 17 | PTE5 | bidirectional | GPIO port E bit 5 with default function DISABLED and alternate KBI1_P5. |
| 18 | PTB5 | bidirectional | GPIO port B bit 5 with default function DISABLED and alternates KBI0_P13, FTM2_CH5, SPI0_PCS and ACMP1_OUT; this pin is high-current drive when operated as output. |
| 19 | PTB4 | bidirectional | Default function NMI_b, non-maskable interrupt input, with alternates PTB4, KBI0_P12, FTM2_CH4, SPI0_MISO and ACMP1_IN2; this pin is high-current drive when operated as output. |
| 20 | PTC3 | bidirectional | GPIO port C bit 3 with default function ADC0_SE11 and alternates KBI0_P19 and FTM2_CH3. |
| 21 | PTC2 | bidirectional | GPIO port C bit 2 with default function ADC0_SE10 and alternates KBI0_P18 and FTM2_CH2. |
| 22 | PTD7 | bidirectional | GPIO port D bit 7 with default function DISABLED and alternates KBI0_P31 and UART2_TX. |
| 23 | PTD6 | bidirectional | GPIO port D bit 6 with default function DISABLED and alternates KBI0_P30 and UART2_RX. |
| 24 | PTD5 | bidirectional | GPIO port D bit 5 with default function DISABLED and alternates KBI0_P29 and PWT_IN0. |
| 25 | PTC1 | bidirectional | GPIO port C bit 1 with default function ADC0_SE9 and alternates KBI0_P17 and FTM2_CH1. |
| 26 | PTC0 | bidirectional | GPIO port C bit 0 with default function ADC0_SE8 and alternates KBI0_P16 and FTM2_CH0. |
| 27 | PTF7 | bidirectional | GPIO port F bit 7 with default function ADC0_SE15 and alternate KBI1_P15. |
| 28 | PTF6 | bidirectional | GPIO port F bit 6 with default function ADC0_SE14 and alternate KBI1_P14. |
| 29 | PTF5 | bidirectional | GPIO port F bit 5 with default function ADC0_SE13 and alternate KBI1_P13. |
| 30 | PTF4 | bidirectional | GPIO port F bit 4 with default function ADC0_SE12 and alternate KBI1_P12. |
| 31 | PTB3 | bidirectional | GPIO port B bit 3 with default function ADC0_SE7 and alternates KBI0_P11, SPI0_MOSI and FTM0_CH1. |
| 32 | PTB2 | bidirectional | GPIO port B bit 2 with default function ADC0_SE6 and alternates KBI0_P10, SPI0_SCK and FTM0_CH0. |
| 33 | PTB1 | bidirectional | GPIO port B bit 1 with default function ADC0_SE5 and alternates KBI0_P9 and UART0_TX. |
| 34 | PTB0 | bidirectional | GPIO port B bit 0 with default function ADC0_SE4 and alternates KBI0_P8, UART0_RX and PWT_IN1. |
| 35 | PTF3 | bidirectional | GPIO port F bit 3 with default function DISABLED and alternates KBI1_P11 and UART1_TX. |
| 36 | PTF2 | bidirectional | GPIO port F bit 2 with default function DISABLED and alternates KBI1_P10 and UART1_RX. |
| 37 | PTA7 | bidirectional | GPIO port A bit 7 with default function ADC0_SE3 and alternates KBI0_P7, FTM2_FLT2 and ACMP1_IN1. |
| 38 | PTA6 | bidirectional | GPIO port A bit 6 with default function ADC0_SE2 and alternates KBI0_P6, FTM2_FLT1 and ACMP1_IN0. |
| 39 | PTE4 | bidirectional | GPIO port E bit 4 with default function DISABLED and alternate KBI1_P4. |
| 40 | VSS | power_in | Ground pin VSS. |
| 41 | VDD | power_in | Power supply pin VDD. |
| 42 | PTF1 | bidirectional | GPIO port F bit 1 with default function DISABLED and alternates KBI1_P9 and FTM2_CH1. |
| 43 | PTF0 | bidirectional | GPIO port F bit 0 with default function DISABLED and alternates KBI1_P8 and FTM2_CH0. |
| 44 | PTD4 | bidirectional | GPIO port D bit 4 with default function DISABLED and alternate KBI0_P28. |
| 45 | PTD3 | bidirectional | GPIO port D bit 3 with default function DISABLED and alternates KBI0_P27 and SPI1_PCS. |
| 46 | PTD2 | bidirectional | GPIO port D bit 2 with default function DISABLED and alternates KBI0_P26 and SPI1_MISO. |
| 47 | PTA3 | bidirectional | GPIO port A bit 3 with default function DISABLED and alternates KBI0_P3, UART0_TX and I2C0_SCL; this pin is a true open-drain pin when operated as output. |
| 48 | PTA2 | bidirectional | GPIO port A bit 2 with default function DISABLED and alternates KBI0_P2, UART0_RX and I2C0_SDA; this pin is a true open-drain pin when operated as output. |
| 49 | PTA1 | bidirectional | GPIO port A bit 1 with default function ADC0_SE1 and alternates KBI0_P1, FTM0_CH1, I2C0_4WSDAOUT and ACMP0_IN1. |
| 50 | PTA0 | bidirectional | GPIO port A bit 0 with default function ADC0_SE0 and alternates KBI0_P0, FTM0_CH0, I2C0_4WSCLOUT and ACMP0_IN0. |
| 51 | PTC7 | bidirectional | GPIO port C bit 7 with default function DISABLED and alternates KBI0_P23 and UART1_TX. |
| 52 | PTC6 | bidirectional | GPIO port C bit 6 with default function DISABLED and alternates KBI0_P22 and UART1_RX. |
| 53 | PTE3 | bidirectional | GPIO port E bit 3 with default function DISABLED and alternates KBI1_P3 and SPI0_PCS. |
| 54 | PTE2 | bidirectional | GPIO port E bit 2 with default function DISABLED and alternates KBI1_P2, SPI0_MISO and PWT_IN0. |
| 55 | PTG3 | bidirectional | GPIO port G bit 3 with default function DISABLED and alternate KBI1_P19. |
| 56 | PTG2 | bidirectional | GPIO port G bit 2 with default function DISABLED and alternate KBI1_P18. |
| 57 | PTG1 | bidirectional | GPIO port G bit 1 with default function DISABLED and alternate KBI1_P17. |
| 58 | PTG0 | bidirectional | GPIO port G bit 0 with default function DISABLED and alternate KBI1_P16. |
| 59 | PTE1 | bidirectional | GPIO port E bit 1 with default function DISABLED and alternates KBI1_P1, SPI0_MOSI and I2C1_SCL; this pin is high-current drive when operated as output. |
| 60 | PTE0 | bidirectional | GPIO port E bit 0 with default function DISABLED and alternates KBI1_P0, SPI0_SCK, TCLK1 and I2C1_SDA; this pin is high-current drive when operated as output. |
| 61 | PTC5 | bidirectional | GPIO port C bit 5 with default function DISABLED and alternates KBI0_P21, FTM1_CH1 and RTC_CLKOUT. |
| 62 | PTC4 | bidirectional | Default function SWD_CLK, the serial wire debug clock, with alternates PTC4, KBI0_P20, RTC_CLKOUT, FTM1_CH0 and ACMP0_IN2. |
| 63 | PTA5 | bidirectional | Default function RESET_b, the active-low reset input, with alternates PTA5, KBI0_P5, IRQ and TCLK0. |
| 64 | PTA4 | bidirectional | Default function SWD_DIO, the serial wire debug data pin, with alternates PTA4, KBI0_P4 and ACMP0_OUT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
CAD (KiCad official)
- Symbol:
MKE04Z128VLH4 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
mke04z128vlh4-etched.step/mke04z128vlh4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mke04z128vlh4.step/mke04z128vlh4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (38 pp, sha256
74f089cfc3a0a25c, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).