LT6200IS6-10#TRMPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT	output	Amplifier output, which swings rail-to-rail and is specified with 60mA minimum output current and indefinite short-circuit duration.
2	V-	power_in	Negative supply rail; total supply voltage (V+ to V-) is specified from 2.5V to 12.6V absolute maximum 12.6V.
3	+IN	input	Non-inverting input; the input common mode range includes both supply rails.
4	-IN	input	Inverting input of the amplifier.
5	SHDN	input	Shutdown pin; VSHDN must be 0.3V max (LOW) to disable the amplifier and 0.3V max to reduce supply current, while HIGH is V+ minus 0.5V min.
6	V+	power_in	Positive supply rail; total supply voltage (V+ to V-) absolute maximum is 12.6V.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	TSOT-23-6
Category	Operational Amplifier/Comparator
Pins	6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Input Current		-40		40	mA	Note 2	2
Pin Current While Exceeding Supplies		-30		30	mA	Note 12	2
Operating Temperature Range		-40		85	°C	Note 4	2
Specified Temperature Range		-40		85	°C	Note 5	2
Junction Temperature	TJ			150	°C		2
Storage Temperature Range		-65		150	°C		2
Lead Temperature (Soldering, 10 sec)				300	°C		2
Thermal Resistance Junction-to-Ambient	θJA		160		°C/W	S6 package, TJMAX = 150°C (Note 10)	2
Input Offset Voltage	VOS		0.1	1	mV	VS = 5V, VCM = Half Supply	3
Input Offset Voltage	VOS		0.9	2.5	mV	VS = 3V, VCM = Half Supply	3
Input Offset Voltage	VOS		0.6	2	mV	VS = 5V, VCM = V+ to V-	3
Input Offset Voltage	VOS		1.8	4	mV	VS = 3V, VCM = V+ to V-	3
IB Shift	ΔIB		31	68	µA	VCM = V- to V+	3
Input Offset Current	IOS		0.1	4	µA	VCM = Half Supply	3
Input Noise Voltage Density	en		1.1		nV/√Hz	f = 100kHz, VS = 5V	3
Large-Signal Gain	AVOL	70	120		V/mV	VS = 5V, VO = 0.5V to 4.5V, RL = 1k to VS/2	3
Large-Signal Gain	AVOL	17	70		V/mV	VS = 3V, VO = 0.5V to 2.5V, RL = 1k to VS/2	3
Common Mode Rejection Ratio	CMRR	65	90		dB	VS = 5V, VCM = V- to V+	3
Common Mode Rejection Ratio	CMRR	85	112		dB	VS = 5V, VCM = 1.5V to 3.5V	3
Common Mode Rejection Ratio	CMRR	60	85		dB	VS = 3V, VCM = V- to V+	3
Power Supply Rejection Ratio	PSRR	60	68		dB	VS = 2.5V to 10V	3
Minimum Supply Voltage				2.5	V	Note 6	3
Output Voltage Swing LOW	VOL		9	50	mV	No Load (Note 7)	4
Output Voltage Swing LOW	VOL		50	100	mV	ISINK = 5mA	4
Output Voltage Swing LOW	VOL		150	290	mV	VS = 5V, ISINK = 20mA	4
Output Voltage Swing HIGH	VOH		55	110	mV	No Load (Note 7)	4
Output Voltage Swing HIGH	VOH		95	190	mV	ISOURCE = 5mA	4
Output Voltage Swing HIGH	VOH		220	400	mV	VS = 5V, ISOURCE = 20mA	4
Short-Circuit Current	ISC	60	90		mA	VS = 5V, printed ±60 / ±90	4
Supply Current per Amplifier	IS		16.5	20	mA	VS = 5V	4
Supply Current per Amplifier	IS		15	18	mA	VS = 3V	4
Disabled Supply Current per Amplifier	IS		1.3	1.8	mA	VSHDN = 0.3V	4
SHDN Pin Current	ISHDN		200	280	µA	VSHDN = 0.3V	4
VSHDN Pin Input Voltage LOW	VL			0.3	V		4
Shutdown Output Leakage Current			0.1	75	µA	VSHDN = 0.3V	4
Turn-On Time	tON		180		ns	VSHDN = 0.3V to 4.5V, RL = 100Ω, VS = 5V	4
Turn-Off Time	tOFF		180		ns	VSHDN = 4.5V to 0.3V, RL = 100Ω, VS = 5V	4
Input Offset Voltage Drift	VOS TC		2.5	8	µV/ºC	VCM = Half Supply, -40°C < TA < 85°C (Note 8)	5
Input Offset Voltage	VOS		1.4	4	mV	VS = ±5V, VCM = Half Supply	6
Input Noise Voltage Density	en		0.95		nV/√Hz	VS = ±5V, f = 100kHz	7
Input Noise Voltage Density	en		1.4	2.3	nV/√Hz	VS = ±5V, f = 10kHz	7
Large-Signal Gain	AVOL	115	200		V/mV	VS = ±5V, VO = ±4.5V, RL = 1k	7
Common Mode Rejection Ratio	CMRR	68	96		dB	VS = ±5V, VCM = V- to V+	7
Power Supply Rejection Ratio	PSRR	60	68		dB	VS = ±1.25V to ±5V	7
Supply Current per Amplifier	IS		20	23	mA	VS = ±5V	7
Gain Bandwidth Product	GBW	1060	1600		MHz	VS = ±5V, Frequency = 1MHz, LT6200-10	7
Slew Rate	SR	315	450		V/µs	VS = ±5V, AV = -10, RL = 1k, VO = 4V, LT6200-10	7
Full Power Bandwidth	FPBW	33	47		MHz	VS = ±5V, VOUT = 3VP-P (LT6200-10)	8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part	Material	Colour / plating	Datasheet says	Page
contacts	copper		metal attached to the V- pin of the device. θJA is specified for a certain amount of 2oz copper metal trace connecting to the V- pin as described in	10

CAD (KiCad official)

Symbol: LT6200IS6-10#TRMPBF
Footprint: Package_TO_SOT_SMD:TSOT-23-6
3D model: TSOT-23-6 (KiCad packages3D, STEP)
3D model files: lt6200is6-10-trmpbf-etched.step / lt6200is6-10-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6200is6-10-trmpbf.step / lt6200is6-10-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (26 pp, sha256 57cc8d3a65aa37f6, retrieved 2026-10-31, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LT6200IS6-10#TRMPBF

Verified LT6200IS6-10#TRMPBF

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README