3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTMCS1107A2UQDR
Texas Instruments · Current Sensors · SOIC-8
TMCS1107A2UQDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Input current positive pin; current flowing into IN+ is defined as positive, and VIN+ is specified from -420 V to 420 VPK relative to GND. |
| 2 | IN+ | input | Input current positive pin (second IN+ pin, internally connected to pin 1 through the 1.8-mΩ input conductor); VIN+ is specified from -420 V to 420 VPK relative to GND. |
| 3 | IN- | input | Input current negative pin; VIN- is specified from -420 V to 420 VPK relative to GND, and the input conductor is rated for 30 A RMS continuous at 25°C, derated to 16 A at 125°C. |
| 4 | IN- | input | Input current negative pin (second IN- pin, internally connected to pin 3 through the input conductor); VIN- is specified from -420 V to 420 VPK relative to GND. |
| 5 | GND | power_in | Analog ground and reference for VS, VOUT, NC and the input voltage ratings; absolute maximum VS is GND - 0.3 V to 6 V. |
| 6 | NC | unconnected | No connect; the pin can tolerate a capacitive or resistive connection to GND or VS (short to GND recommended if acceptable), with an input impedance of 1 MΩ and an absolute voltage range of GND - 0.3 V to VS + 0.3 V. |
| 7 | VOUT | output | Analog output voltage proportional to input current; swings to within 0.1 V of VS and 10 mV of GND at 10 kΩ load, with a maximum capacitive load of 1 nF. |
| 8 | VS | power_in | Analog supply; the TMCS1107A2U operates from 3 V to 5.5 V (absolute maximum 6 V), with 0.1-µF low-ESR decoupling recommended between VS and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, operating (TMCS1107A1B/U-A3B/U) | VS | 3 | 5 | 5.5 | V | TMCS1107A1B/U-A3B/U | 4 |
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Input voltage (VIN+, VIN- relative to GND) | VIN+,VIN- | -420 | 420 | VPK | 4 | ||
| Supply voltage (absolute maximum) | VS | 6 | V | 4 | |||
| Junction temperature | TJ | -65 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Sensitivity error | -1.2 | 0.4 | 1.2 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC | 8 | |
| Sensitivity error, including lifetime and environmental drift | -1.8 | 0.7 | 1.8 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC | 8 | |
| Sensitivity error | -1.8 | 0.7 | 1.8 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +85ºC | 8 | |
| Sensitivity error | -2.25 | 0.9 | 2.25 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +125ºC | 8 | |
| Nonlinearity error | -0.5 | 0.5 | % | VOUT = 0.5 V to VS, 0.5 V | 8 | ||
| Output voltage offset error | VOE | -10 | 2 | 10 | mV | 8 | |
| Output voltage offset drift | -40 | 10 | 40 | µV/℃ | TA= -40ºC to +125ºC | 8 | |
| Offset error, RTI | IOS | -100 | 20 | 100 | mA | 9 | |
| Offset error temperature drift, RTI | -400 | 100 | 400 | µA/°C | TA= -40ºC to +125ºC | 9 | |
| Power-supply rejection ratio | PSRR | -6.5 | 1 | 6.5 | mV/V | VS = 3 V to 5.5 V, TA= -40ºC to +125ºC | 9 |
| Quiescent current | IQ | 4.5 | 5.5 | mA | TA = 25ºC | 10 | |
| Quiescent current | IQ | 6 | mA | TA = -40ºC to +125ºC | 10 | ||
| Common mode transient immunity | 50 | kV/µs | 9 | ||||
| Common mode rejection ratio, RTI | CMRR | 5 | uA/V | DC to 60Hz | 9 | ||
| Noise density, RTI (TMCS1107A2U) | 330 | μA/√Hz | 9 | ||||
| Input conductor resistance | RIN | 1.8 | mΩ | IN+ to IN- | 9 | ||
| Input conductor resistance temperature drift | 4.4 | μΩ/°C | TA= -40ºC to +125ºC | 9 | |||
| Magnetic coupling factor | G | 1.1 | mT/A | TA= 25ºC | 9 | ||
| Allowable continuous RMS current | IIN,max | 30 | A | TA= 25ºC | 9 | ||
| Allowable continuous RMS current | IIN,max | 25 | A | TA= 85ºC | 9 | ||
| Allowable continuous RMS current | IIN,max | 22.5 | A | TA= 105ºC | 9 | ||
| Allowable continuous RMS current | IIN,max | 16 | A | TA= 125ºC | 9 | ||
| NC (pin 6) input impedance | 1 | MΩ | Over allowable range, GND < VNC < VS | 9 | |||
| Closed loop output impedance | ZOUT | 0.2 | Ω | f = 1 Hz to 1 kHz | 9 | ||
| Closed loop output impedance | ZOUT | 2 | Ω | f = 10 kHz | 9 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 9 | |||
| Short circuit output current | 90 | mA | VOUT short to ground, short to VS | 9 | |||
| Bandwidth, -3-dB | BW | 80 | kHz | -3-dB Bandwidth | 10 | ||
| Slew rate | SR | 1.5 | V/µs | Slew rate of output amplifier during single transient step | 10 | ||
| Response time | tr | 6.5 | µs | Input current step 90% to sensor output 90%, for a 1 V output transition | 10 | ||
| Propagation delay | tp | 4 | µs | Input current step 10% to sensor output 10%, for a 1 V output transition | 10 | ||
| Current overload response time | tr,SC | 5 | µs | Input current step amplitude is twice full scale output range | 10 | ||
| Current overload propagation delay | tp,SC | 3 | µs | Input current step amplitude is twice full scale output range | 10 | ||
| Current overload recovery time | 15 | µs | Time from end of current causing output saturation condition to valid output | 10 | |||
| Power on time | 25 | ms | Time from VS > 3 V to valid output | 10 | |||
| Junction-to-ambient thermal resistance | RθJA | 36.6 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 50.7 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 9.6 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ΨJT | -0.1 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ΨJB | 11.7 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | directly underneath the package lead footprint, and use a merged copper input trace for both the IN+ and IN- | 32 |
CAD (KiCad official)
- Symbol:
TMCS1107A2UQDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tmcs1107a2uqdr-etched.step/tmcs1107a2uqdr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmcs1107a2uqdr.step/tmcs1107a2uqdr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
d6b410437cae17af, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).