MAX6070AAUT18+T from Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	FILTER	passive	Filter input for the MAX6070; connect a 0.1µF capacitor from FILTER to ground for high-frequency bypass, or leave it unconnected if not used.
2	GND	power_in	Ground reference for the MAX6070.
3	EN	input	Active-high enable: drive high to enable the device and drive low to disable it (pulling EN low forces quiescent current below 1µA).
4	IN	power_in	Supply input; the absolute maximum rating for IN to GNDS, GNDF, GND is -0.3V to +6V.
5	OUTS	output	Voltage reference sense output, connected to the load point where voltage accuracy is needed (Kelvin sense).
6	OUTF	output	Voltage reference force output that supplies load current; short to OUTS as close as possible to the load and bypass with a 0.1µF to 10µF capacitor to GND.

Key specifications

Parameter	Value
Manufacturer	Maxim Integrated
Package	SOT-23-6
Category	Power Management ICs
Pins	6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Output Voltage Accuracy (A grade, TA = +25°C)		-0.04		0.04	%	MAX6070A/MAX6071A, TA = +25°C	4
Output Voltage Temperature Drift (A grade)	TCVOUT		1.5	6	ppm/°C	MAX6070A/MAX6071A	4
Line Regulation			35	150	µV/V	TA = +25°C	4
Line Regulation				200	µV/V	TA = TMIN to TMAX	4
Load Regulation, sink			120	200	µV/mA	0mA < IOUT < 10mA, sink	4
Load Regulation, source			120	200	µV/mA	0mA < IOUT < 10mA, source	4
Output Current	IOUT	-10		10	mA		4
Short-Circuit Current, sourcing to ground	ISC		25		mA	Sourcing to ground	4
Short-Circuit Current, sinking from VIN	ISC		25		mA	Sinking from VIN	4
Quiescent Supply Current	IIN		130	200	µA	TA = +25°C	4
Quiescent Supply Current	IIN			260	µA	TA = TMIN to TMAX	4
Shutdown Supply Current	ISD			6	µA		4
Supply Voltage	VIN	2.7		5.5	V	Guaranteed by line regulation	4
Enable Input Current	IEN	-1		1	µA		4
Enable Logic-High Voltage	VIH	0.7			V		4
Enable Logic-Low Voltage	VIL			0.3	V		4
Capacitive-Load Stability Range		0.1		10	µF	IOUT ≤ 10mA	4
Continuous Power Dissipation, SOT23 (derate 4.3mW/°C above +70°C)				347.8	mW	TA = +70°C	2
OUTF to GNDS, GNDF, GND voltage (max is lower of VIN + 0.3V and +6V)	OUTF	-0.3		6	V		2
OUTS to GNDS, GNDF, GND voltage	OUTS	-0.3		6	V		2
IN to GNDS, GNDF, GND voltage	IN	-0.3		6	V		2
EN to GNDS, GNDF, GND voltage	EN	-0.3		6	V		2
FILTER to GND voltage (max is lower of VIN + 0.3V and +6V)	FILTER	-0.3		6	V		2
Operating Temperature Range		-40		125	°C		2
Junction Temperature	TJ			150	°C		2
Storage Temperature Range		-65		150	°C		2
Soldering Temperature (reflow)				260	°C		2
Lead Temperature (soldering)				300	°C	10s	2
Thermal Resistance, Junction to Ambient (SOT23)	θJA		230		°C/W	Multi-layer board	2
Thermal Resistance, Junction to Case (SOT23)	θJC		76		°C/W	Multi-layer board	2

CAD (KiCad official)

Symbol: MAX6070AAUT18+T
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: SOT-23-6 (KiCad packages3D, STEP)
3D model files: max6070aaut18-t-etched.step / max6070aaut18-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max6070aaut18-t.step / max6070aaut18-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Maxim Integrated datasheet (26 pp, sha256 5b48e6a8cb45c5c4, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

MAX6070AAUT18+T

Verified MAX6070AAUT18+T

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README