Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC5239-3.3YM-TR

Microchip Tech · Pre-ordered MCUs · SOIC-8

MIC5239-3.3YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input: logic low shuts the regulator down and logic high enables it.
2 FLG output Error FLAG open-collector output is active low when the output is out of regulation due to insufficient input voltage or excessive load, and an external pull-up resistor is required.
3 IN power_in Power supply input to the regulator.
4 OUT power_out Regulated output of the device.
5 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe.
6 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe.
7 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe.
8 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Single Chip Microcomputer/Microcontroller
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy (25°C) VOUT -1 1 % Variation from nominal VOUT; TJ = 25°C 4
Output Voltage Accuracy (over temperature) VOUT -2 2 % Variation from nominal VOUT; -40°C ≤ TJ ≤ +125°C (bold) 4
Line Regulation ∆VOUT/VOUT 0.06 0.5 % VIN = VOUT +1V to 30V 4
Load Regulation ∆VOUT/VOUT 15 30 mV IOUT = 100µA to 500mA 4
Dropout Voltage (150mA, 25°C) ∆V 260 350 mV IOUT = 150mA 4
Dropout Voltage (150mA, over temperature) ∆V 400 mV IOUT = 150mA; -40°C ≤ TJ ≤ +125°C (bold) 4
Ground Pin Current (100µA, 25°C) IGND 23 40 µA VEN ≥ 2.0V, IOUT = 100µA 4
Ground Pin Current (100µA, over temperature) IGND 45 µA VEN ≥ 2.0V, IOUT = 100µA; -40°C ≤ TJ ≤ +125°C (bold) 4
Ground Pin Current (150mA) IGND 1.3 5 mA VEN ≥ 2.0V, IOUT = 150mA 4
Ground Pin Current (500mA) IGND 8.5 15 mA VEN ≥ 2.0V, IOUT = 500mA 4
Ground Pin Shutdown Current IGND(SHDN) 0.1 1 µA VEN ≤ 0.6V, VIN = 30V 4
Short Circuit Current ISC 850 1200 mA VOUT = 0V 4
Enable Input Low Voltage VIL 0.6 V regulator off 4
Enable Input High Voltage VIH 2 V regulator on 4
Enable Input Current (VEN = 0.6V, 25°C) IIN -1 0.01 1 µA VEN = 0.6V, regulator off 4
Enable Input Current (VEN = 0.6V, over temperature) IIN -2 2 µA VEN = 0.6V, regulator off; -40°C ≤ TJ ≤ +125°C (bold) 4
Enable Input Current (VEN = 2.0V, 25°C) IIN 0.15 1 µA VEN = 2.0V, regulator on 4
Enable Input Current (VEN = 2.0V, over temperature) IIN 2 µA VEN = 2.0V, regulator on; -40°C ≤ TJ ≤ +125°C (bold) 4
Enable Input Current (VEN = 30V, 25°C) IIN 0.5 2.5 µA VEN = 30V, regulator on 4
Enable Input Current (VEN = 30V, over temperature) IIN 5 µA VEN = 30V, regulator on; -40°C ≤ TJ ≤ +125°C (bold) 4
Supply Voltage (absolute maximum) VIN -20 32 V 4
Enable Input Voltage (absolute maximum) VEN -0.3 32 V 4
Junction Temperature (absolute maximum) TJ -40 125 °C 4
Storage Temperature (absolute maximum) TS -65 150 °C 4
Lead Temperature (absolute maximum) 260 °C soldering, 5 sec. 4
Supply Voltage (recommended operating) VIN 2.3 30 V 4
Enable Input Voltage (recommended operating) VEN 0 30 V 4
Junction Temperature (recommended operating) TJ -40 125 °C 4
Junction-to-Ambient Thermal Resistance (SOIC) θJA 63 °C/W MIC5239-x.xBM (all versions) mounted on PC board, note 3 5
Dropout Voltage (100µA) ∆V 50 mV IOUT = 100µA 4
Dropout Voltage (500mA) ∆V 350 mV IOUT = 500mA 4
Output Noise en 160 µVrms 10Hz to 100kHz, VOUT = 3.0V, CL = 3.3µF 4
FLAG Low Threshold VFLG 94 % % of VOUT 4
FLAG High Threshold VFLG 95 % % of VOUT 4
FLAG Output Low Voltage VOL 150 mV VIN = VOUT(nom), 0.12VOUT, IOL = 200µA 4
FLAG Output Leakage ILEAK 0.1 µA VOH = 30V 4

CAD (KiCad official)

  • Symbol: MIC5239-3.3YM-TR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic5239-3-3ym-tr-etched.step / mic5239-3-3ym-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5239-3-3ym-tr.step / mic5239-3-3ym-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (14 pp, sha256 2ce7b3cb44b7f5e7, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF