Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XC9280A75CYR-G

Torex Semicon · DC-DC Converters · TSOT-23-6

XC9280A75CYR-G from Torex Semicon, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin for the IC, which must be connected to the system ground.
2 LX output Switching output that drives the external inductor; the Lx pin voltage is rated at -0.3 to VIN+0.3 or 20 V, and the Lx pin current is rated at 6.0 A absolute maximum.
3 VIN power_in Power input pin with an absolute maximum rating of -0.3 to 20 V, and an operating input voltage range of 4.5 V to 18 V.
4 FB input Output voltage sense input, rated at -0.3 to 6.2 V absolute maximum, with output set by external resistors RFB1 and RFB2.
5 EN/SS input Enable and soft-start pin where H is active and L is stand-by, and it must not be left open because the state is then undefined.
6 BST power_out Bootstrap pin for the high-side driver, rated at VLX-0.3 to VLX+6.2 V absolute maximum and used with a 0.1 µF bootstrap capacitor.

Key specifications

Parameter Value
Manufacturer Torex Semicon
Package TSOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Pin Voltage VIN -0.3 20 V 4
EN/SS Pin Voltage VEN/SS -0.3 20 V 4
FB Pin Voltage VFB -0.3 6.2 V 4
Lx Pin Current ILx 6 A 4
Power Dissipation TSOT-26 Pd 1300 mW Ta=25℃, PCB mounted, high heat dissipation board, reference only 4
Operating Ambient Temperature Topr -40 105 ℃ 4
Storage Temperature Tstg -55 125 ℃ 4
Setting Output Voltage Range VOUTSET 1.8 7 V Maximum is 7.0 or VIN x 0.7 (lowest); VOUT/VIN ≧ 0.136 5
Operating Input Voltage Range VIN 4.5 18 V 5
FB Voltage VFB 0.739 0.75 0.761 V VFB=0.761V → 0.739V, VFB voltage when Lx pin oscillates 5
UVLO Detect Voltage VUVLOD 2.7 3.33 V VIN:4.4V→2.7V、VFB=0.675V 5
UVLO Release Voltage VUVLOR 3.38 4.4 V VIN:2.7V→4.4V、VFB=0.675V 5
Quiescent Current Iq 80 180 μA VIN=VEN/SS=12V、VFB=0.825V、VLX=0V 5
Stand-by Current ISTBY 3 6 μA VIN=12V、VEN/SS=VFB=VLX=0V 5
Oscillation Frequency fOSC 1 1.2 1.4 MHz Connected to external components, VIN=VEN/SS=6.0V、VFB=0.675V 5
Maximum Duty Cycle DMAX 75 90 % Connected to external components, VIN=VEN/SS=6.0V、VFB=0.675V 5
Lx SW H On Resistance RLxH 166 mΩ Design reference value, provided for reference only (*2) 5
Lx SW L On Resistance RLxL 130 mΩ VFB=5.5V、ILX=100mA 5
Lx SW H Off Current ILXH -1 μA VIN=18V、VEN/SS=0V、VFB=1.5V、VLX=6.0V、VBST=VLX+5.0V 5
Lx SW L Off Current ILXL 1 μA VIN=18V、VEN/SS=VFB=VLX=0V 5
Current Limit ILIM 5.1 A 5
PFM Switch Current IPFM 1.2 A Connected to external components, VIN=12V、VOUT=5.0V、IOUT=1mA 5
Internal Soft-Start Time tSS1 0.95 ms VFB=0.675V 5
External Soft-Start Time tSS2 26 ms VFB=0.675V、RSS=430kΩ、CSS=0.47μF 5
Efficiency EFFI 90 % Connected to external components, VIN=12V、VOUT=5.0V、IOUT=1.0A 5
FB Voltage Temperature Characteristics ΔVFB/(ΔTopr・VFB) -100 100 ppm/℃ -40℃≦Topr≦105℃ 5
FB H Current IFBH -0.1 0.1 μA VIN=VEN/SS=18V、VFB=3.0V、VLX=0V 6
FB L Current IFBL -0.1 0.1 μA VIN=VEN/SS=18V、VFB=VLX=0V 6
EN/SS H Voltage VEN/SSH 2.5 18 V VIN=18V、VFB=0.71V 6
EN/SS L Voltage VEN/SSL 0.3 V VIN=18V、VFB=1.5V 6
EN/SS H Current IEN/SSH 0.1 0.3 μA VIN=VEN/SS=18V、VFB=1.5V、VLX=0V 6
EN/SS L Current IEN/SSL -0.1 0.1 μA VIN=18V、VEN/SS=VFB=VLX=0V 6
Thermal Shutdown Temperature TTSD 150 ℃ Junction Temperature 6
Thermal Shutdown Hysteresis Width THYS 10 ℃ Junction Temperature 6
Thermal Resistance Junction-to-Ambient θJA 64 ℃/W Reference pattern layout, 4 layer board 50mm×60mm, FR-4 1.6mm 15
Maximum Operating Junction Temperature Tj 125 ℃ Operating junction temperature 15

CAD (KiCad official)

  • Symbol: XC9280A75CYR-G
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: xc9280a75cyr-g-etched.step / xc9280a75cyr-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xc9280a75cyr-g.step / xc9280a75cyr-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Torex Semicon datasheet (28 pp, sha256 8fba04b1d67566ca, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF