Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MPQ6532GVE-AEC1-Z

Monolithic Power Systems · Motor Driver ICs · QFN-28(4x5)

MPQ6532GVE-AEC1-Z from Monolithic Power Systems, in a QFN-28(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply voltage (5V to 60V operating) that must be bypassed to ground with a ceramic capacitor, with additional bulk capacitance possibly required.
2 CPA passive Charge pump capacitor terminal; connect a ceramic capacitor (0.47µF typical) between CPA and CPB.
3 CPB passive Charge pump capacitor connection terminal, paired with CPA.
4 VREG power_out Gate drive supply output (9.5V to 13V for VIN of 5.5V to 60V) that needs a ceramic capacitor to ground (10µF typical).
5 BSTA passive Bootstrap for phase A; connect a ceramic capacitor from this pin to SHA (0.1µF to 1µF recommended).
6 SHA passive High-side source connection for phase A.
7 GHA output High-side gate drive for phase A.
8 GLA output Low-side gate drive for phase A.
9 BSTB passive Bootstrap for phase B; connect a ceramic capacitor from this pin to SHB.
10 SHB passive High-side source connection for phase B.
11 GHB output High-side gate drive for phase B.
12 GLB output Low-side gate drive for phase B.
13 BSTC passive Bootstrap for phase C; connect a ceramic capacitor from this pin to SHC.
14 SHC passive High-side source connection for phase C.
15 GHC output High-side gate drive for phase C.
16 GLC output Low-side gate drive for phase C.
17 LSS passive Low-side source connection for the shunt resistor; OCP trips at VLSS-OCP of 0.4V to 0.6V (0.5V typical), or connect directly to ground if not needed.
18 HC input Hall-sensor input for phase C with an internal pull-down resistor.
19 HB input Hall-sensor input for phase B with an internal pull-down resistor.
20 HA input Hall-sensor input for phase A with an internal pull-down resistor.
21 nBRAKE input Brake input; pull active low to turn on all low-side MOSFETs and stop the motor, high for normal operation, with an internal pull-down resistor.
22 PWM input External PWM input; high drives the selected phase high and low drives it low, with an internal pull-down resistor.
23 DIR input Direction input; pull high or low to set the motor rotation direction.
24 nFAULT output Open-drain fault indication output that is pulled low when a fault condition occurs (VOL 0.5V max at 5mA).
25 nSLEEP input Sleep mode input; pull low for low-power sleep mode, high to enable the device, with an internal pull-down.
26 OC_REF input Over-current (short-circuit) protection reference voltage input, recommended range 0.125V to 2.4V.
27 DT passive Dead time setting; connect a resistor to ground to set the dead time (tDEAD(ns) = 60 x R(kΩ)).
28 GND power_in Ground.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package QFN-28(4x5)
Category Power Supply Chip
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage VIN 5 60 V 6
Quiescent current IQ 1.8 4 mA nSLEEP = 1, gate not switching 6
Sleep current ISLEEP 2.5 µA nSLEEP = 0 6
Low input logic threshold VIL 0.8 V 6
High input logic threshold VIH 2 V 6
Input current logic high IIN(H) -20 20 µA VIH = 5V 6
Input current logic low IIN(L) -20 20 µA VIL = 0.8V 6
Fault low-voltage output VOL 0.5 V IOUT = 5mA 6
Fault high leakage current output IOH 1 µA VOUT = 3.3V 6
UVLO rising threshold VIN_RISING 3.2 3.9 5 V 6
VREG rising threshold VREG_RISING 6.8 7.6 8.4 V 6
OC_REF threshold VOC_REF 0.8 1 1.2 V VOC_REF = 1V 6
OC_REF threshold VOC_REF 2.18 2.4 2.62 V VOC_REF = 2.4V 6
LSS OCP threshold VLSS-OCP 0.4 0.5 0.6 V 6
VREG output voltage VREG 9.5 11.5 13 V VIN = 5.5V - 60V 7
Bootstrap diode forward voltage VFBOOT 1 V ID = 10mA 7
Bootstrap diode forward voltage VFBOOT 1.4 V ID = 100mA 7
HS gate drive pull-down resistance RHS-DN 1 5 Ω VDS = 1V 7
LS gate drive pull-down resistance RLS-DN 0.7 6.7 Ω VDS = 1V 7
UVLO hysteresis VIN_HYS 200 mV 6
VREG hysteresis VREG_HYS 0.65 1 V 6
VREG start-up delay tREG 880 µs 6
OCP deglitch time tOC 3 µs 6
SLEEP wake-up time tSLEEP 1 ms 6
LSS current limit fixed off time tOFF 70 µs 6
LSS current limit HS minimum on time tON 1 µs 6
Thermal shutdown TTSD 190 °C 6
Thermal shutdown hysteresis ΔTTSD 30 °C Not tested in production 6
Internal pull-down resistance RPD 880 kΩ All logic inputs except nSLEEP 6
nSLEEP pull-down current ISLEEP-PD 1 µA 6
Maximum source current IOSO 0.8 A Not tested in production 7
Maximum sink current IOSI 1 A Not tested in production 7
Gate drive pull-up resistance RUP 8 Ω VDS = 1V 7
LS automatic turn-on time tLS 2 µs At each commutation time 7
Charge pump frequency fCP 110 kHz 7
Dead time tDEAD 700 ns RDT = 10kΩ 7
Dead time tDEAD 90 ns DT tied to GND 7
Dead time tDEAD 5.7 µs RDT = 100kΩ 7
Input voltage VIN -0.3 62 V 5
CPA voltage CPA -0.3 55 V 5
CPB voltage CPB -0.3 12.5 V 5
VREG voltage VREG -0.3 13 V 5
BST voltage BSTA, BSTB, BSTC -0.3 70 V 5
GH voltage continuous GHA, GHB, GHC -0.3 70 V continuous 5
GH voltage transient GHA, GHB, GHC -8 70 V transient, <2µs 5
SH voltage continuous SHA, SHB, SHC -0.3 65 V continuous 5
SH voltage transient SHA, SHB, SHC -8 65 V transient, <2µs 5
GL voltage continuous GLA, GLB, GLC -0.3 13 V continuous 5
GL voltage transient GLA, GLB, GLC -2 13 V transient, <2µs 5
LSS voltage continuous LSS -0.3 1 V continuous 5
LSS voltage transient LSS -2 2 V transient, <2µs 5
All other pins to AGND -0.3 6.5 V 5
Storage temperature TSTG -55 150 °C 5
Junction temperature TJ 150 °C 5
ESD HBM HBM 1.8 kV Human body model 5
Recommended input voltage VIN 5 60 V 5
Recommended OC_REF voltage VOC_REF 0.125 2.4 V 5
Operating junction temperature TJ -40 150 °C 5
Thermal resistance junction-ambient θJA 40 °C/W QFN-28 (4mmx5mm), JESD51-7 4-layer PCB 5
Thermal resistance junction-case θJC 9 °C/W QFN-28 (4mmx5mm), JESD51-7 4-layer PCB 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper and LS-FET source terminals with wide copper areas. 18

CAD (KiCad official)

  • Symbol: MPQ6532GVE-AEC1-Z
  • Footprint: Package_DFN_QFN:QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm
  • 3D model: QFN-28(4x5) (KiCad packages3D, STEP)
  • 3D model files: mpq6532gve-aec1-z-etched.step / mpq6532gve-aec1-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mpq6532gve-aec1-z.step / mpq6532gve-aec1-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (22 pp, sha256 9490dd98fe4eddab, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF