3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownOPA2172IDR
Texas Instruments · Operational Amplifier · SOIC-8
OPA2172IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of channel A op-amp. Rail-to-rail output stage; can swing within ~100 mV of either supply rail with typical loads. |
| 2 | -IN A | input | Inverting input of channel A. Input bias current typ. ±8 pA; input range includes the negative supply and operates to the positive supply. |
| 3 | +IN A | input | Noninverting input of channel A. High-impedance CMOS input; input range includes V- and operates to V+. |
| 4 | V- | power_in | Negative (lowest) power supply. Connect to ground for single-supply operation or to the negative rail for split-supply operation. Total supply range +4.5 V to +36 V (V+ - V-). |
| 5 | +IN B | input | Noninverting input of channel B. High-impedance CMOS input; input range includes V- and operates to V+. |
| 6 | -IN B | input | Inverting input of channel B. Input bias current typ. ±8 pA. |
| 7 | OUT B | output | Output of channel B op-amp. Rail-to-rail output stage. |
| 8 | V+ | power_in | Positive (highest) power supply. Bypass to V- with a low-ESR ceramic capacitor close to the pin. Total supply range +4.5 V to +36 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
OPA2172IDROPA2172IDRIDGKOPA2172IDRIDGKROPA2172IDRGOPA2172IDRGR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, [(V+) – (V-)] | 40 | V | 7 | ||||
| Signal input pins voltage, differential | -0.5 | 0.5 | V | 7 | |||
| Signal input pins current | -10 | 10 | mA | 7 | |||
| Operating temperature | -55 | 150 | °C | 7 | |||
| Junction temperature | TJ | 150 | °C | 7 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| Supply voltage (V+ – V–) | 4.5 | 36 | V | 7 | |||
| Specified temperature | -40 | 125 | °C | 7 | |||
| Junction-to-ambient thermal resistance (D, SOIC-8) | RθJA | 116.1 | °C/W | 8 | |||
| Junction-to-case (top) thermal resistance (D, SOIC-8) | RθJC(top) | 69.8 | °C/W | 8 | |||
| Junction-to-board thermal resistance (D, SOIC-8) | RθJB | 56.6 | °C/W | 8 | |||
| Junction-to-top characterization parameter (D, SOIC-8) | ψJT | 22.5 | °C/W | 8 | |||
| Junction-to-board characterization parameter (D, SOIC-8) | ψJB | 56.1 | °C/W | 8 | |||
| Input offset voltage | VOS | -1 | 0.2 | 1 | mV | 9 | |
| Input offset voltage over temperature | VOS | -1.15 | 1.15 | mV | TA = –40°C to +125°C | 9 | |
| Offset voltage drift (OPA2172) | dVOS/dT | -1.8 | 1.8 | µV/°C | TA = –40°C to +125°C | 9 | |
| PSRR vs power supply | PSRR | -3 | 1 | 3 | µV/V | TA = –40°C to +125°C | 9 |
| Input bias current | IB | -15 | 8 | 15 | pA | 9 | |
| Input bias current over temperature | IB | -14 | 14 | nA | TA = –40°C to +125°C | 9 | |
| Input offset current | IOS | -15 | 2 | 15 | pA | 9 | |
| Input offset current over temperature (OPA2172) | IOS | -3 | 3 | nA | TA = –40°C to +125°C | 9 | |
| Common-mode rejection ratio | CMRR | 90 | 104 | dB | VS = ±2.25 V, (V–) – 0.1 V < VCM < (V+) – 2 V, TA = –40°C to +125°C | 10 | |
| Common-mode rejection ratio | CMRR | 110 | 120 | dB | VS = ±18 V, (V–) – 0.1 V < VCM < (V+) – 2 V, TA = –40°C to +125°C | 10 | |
| Open-loop voltage gain | AOL | 107 | 115 | dB | (V–) + 0.35 V < VO < (V+) – 0.35 V, RL = 10 kΩ, TA = –40°C to +125°C | 10 | |
| Open-loop voltage gain | AOL | 107 | dB | (V–) + 0.5 V < VO < (V+) – 0.5 V, RL = 2 kΩ, TA = –40°C to +125°C | 10 | ||
| Voltage output swing from rail | VO | 70 | 90 | mV | VS = +36 V, RL = 10 kΩ | 10 | |
| Voltage output swing from rail | VO | 330 | 400 | mV | VS = +36 V, RL = 2 kΩ | 10 | |
| Voltage output swing from rail | VO | 95 | 120 | mV | VS = +36 V, TA = –40°C to +125°C, RL = 10 kΩ | 10 | |
| Voltage output swing from rail | VO | 470 | 530 | mV | VS = +36 V, TA = –40°C to +125°C, RL = 2 kΩ | 10 | |
| Voltage output swing from rail | VO | 10 | 20 | mV | VS = +4.5 V, RL = 10 kΩ | 10 | |
| Voltage output swing from rail | VO | 40 | 50 | mV | VS = +4.5 V, RL = 2 kΩ | 10 | |
| Voltage output swing from rail | VO | 10 | 25 | mV | VS = +4.5 V, TA = –40°C to +125°C, RL = 10 kΩ | 10 | |
| Voltage output swing from rail | VO | 55 | 70 | mV | VS = +4.5 V, TA = –40°C to +125°C, RL = 2 kΩ | 10 | |
| Short-circuit current | ISC | -75 | 75 | mA | 10 | ||
| Quiescent current per amplifier | IQ | 1.6 | 1.8 | mA | IO = 0 A | 10 | |
| Quiescent current per amplifier | IQ | 2 | mA | IO = 0 A, TA = –40°C to +125°C | 10 | ||
| Specified voltage range | VS | 4.5 | 36 | V | 10 | ||
| Specified temperature range | -40 | 125 | °C | 10 |
CAD (KiCad official)
- Symbol:
OPA2172IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (61 pp, sha256
7f1eecb90239bafe, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).