TLE5012BE1000 from Infineon, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	IFC	bidirectional	Interface C. Muxed function: External Clock input / IIF Index output / Hall Switch Signal 3. External clock feature is not available in IIF or HSM interface mode. In derivate E1000 this pin is IIF_IDX by default (push-pull).
2	SCK	input	SSC (SPI-compatible) serial clock input from master.
3	CSQ	input	SSC chip-select input (active low).
4	DATA	bidirectional	SSC bi-directional serial data line (3-wire SPI). Push-pull by default; can be configured as open-drain via SSC_OD bit (register MOD_3, 09H).
5	IFA	bidirectional	Interface A. Muxed function: IIF Phase A output / Hall Switch Signal 1 / PWM output / SPC output (also input for SPC master trigger). Output driver mode (push-pull or open-drain) set via IFAB_OD bit (register IFAB, 0DH).
6	VDD	power_in	Supply voltage input, 3.0 V to 5.5 V. Recommended 100 nF decoupling to GND. Feeds internal VRG/VRA/VRD regulators.
7	GND	power_in	Device ground reference.
8	IFB	output	Interface B. Muxed function: IIF Phase B output / Hall Switch Signal 2. Output driver mode (push-pull or open-drain) set via IFAB_OD bit.

Key specifications

Parameter	Value
Manufacturer	Infineon
Package	SO-8
Category	Sensor
Pins	8

Ordering variants

Same part, different packaging or reel option.

TLE5012BE1000
TLE5012BE1000E3005
TLE5012BE1000E5000
TLE5012BE1000E5020
TLE5012BE1000E9000

CAD (KiCad official)

Symbol: TLE5012BE1000
Footprint: Package_SO:TI_SO-PowerPAD-8
3D model: SO-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`tle5012be1000.step`	123 KB	You want the bare part, or you mark your own boards.
`tle5012be1000-etched.step`	2.6 MB	You want the part with `TLE5012BE1000` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 636 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Infineon datasheet (50 pp, sha256 6bded7931460e2b8, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF