Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT8410EDC-1#TRMPBF

Analog Devices · DC-DC Converters · DFN-8-EP(2x2)

LT8410EDC-1#TRMPBF from Analog Devices, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHDN input Shutdown pin that enables or disables the chip: drive below 0.3V to disable and above 1.45V to activate, and do not float this pin.
2 VCC power_in Input supply pin that must be locally bypassed to GND; the absolute maximum rating is -0.3V to 16V and the operating input range is 2.5V to 16V.
3 GND power_in Ground pin that must be tied directly to the local ground plane.
4 SW output Collector of the internal NPN power switch, with an absolute maximum rating of -0.3V to 42V; keep the metal trace area connected to this pin small to minimize EMI.
5 VOUT power_out Drain of the output disconnect PMOS, which requires a bypass capacitor to GND; the absolute maximum rating is -0.3V to 40V and the output voltage is limited to 40V.
6 CAP power_out Cathode of the internal Schottky diode, which requires a bypass capacitor to GND; the absolute maximum rating is -0.3V to 40V.
7 VREF power_in Reference pin that can take a soft-start capacitor to GND; after a 70µs typical discharge at start-up it is charged to 1.235V by a 10µA current source, and its absolute maximum rating is -0.3V to 2.5V.
8 FBP input Positive feedback pin and error amplifier positive input, where the output is set by VFBP = VOUT/31.85; its absolute maximum rating is -0.3V to 2.5V.
9 GND power_in Exposed pad that is GND and must be soldered to the PCB and grounded for proper shielding.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-8-EP(2x2)
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Absolute Maximum VCC Voltage VCC -0.3 16 V 2
Absolute Maximum SW Voltage -0.3 42 V 2
Absolute Maximum CAP Voltage -0.3 40 V 2
Absolute Maximum VOUT Voltage VOUT -0.3 40 V 2
Absolute Maximum SHDN Voltage VSHDN -0.3 16 V 2
Absolute Maximum VREF Voltage VREF -0.3 2.5 V 2
Absolute Maximum FBP Voltage VFBP -0.3 2.5 V 2
Maximum Junction Temperature TJMAX 125 °C 2
Storage Temperature Range -65 150 °C 2
Maximum Operating Voltage 16 V 2
Operating Temperature Range -40 125 °C Note 2 (operating junction temperature range) 2
Reference Voltage 1.22 1.235 1.255 V l: full operating temperature range; VCC = 3V, VSHDN = VCC 2
VREF Current Limit 10 µA Note 3 2
Quiescent Current Not Switching 8.5 12 µA l: full operating temperature range; VCC = 3V, VSHDN = VCC 2
Quiescent Current in Shutdown 0 1 µA l; VSHDN = 0V 2
Quiescent Current from VOUT and CAP 3 µA VOUT = 16V 2
Minimum Switch Off Time After Start-Up 240 nS Note 4 2
Minimum Switch Off Time During Start-Up 600 nS Note 4 2
Switch Current Limit (LT8410-1) 6 8 10 mA LT8410-1; l: full operating temperature range 2
Switch VCESAT (LT8410-1) VCESAT 100 mV LT8410-1, ISW = 4mA 3
Switch Leakage Current 0 1 µA VSW = 5V; TA = 25°C 3
Schottky Forward Voltage 650 850 mV IDIODE = 10mA 3
Schottky Reverse Leakage 0 0.5 µA VCAP, VSW = 5 3
Schottky Reverse Leakage 0 1 µA VCAP, VSW = 40 3
PMOS Disconnect Current Limit (LT8410-1) 2.5 4 5 mA LT8410-1 3
PMOS Disconnect VCAP, VOUT 50 mV IOUT = 1mA 3
VOUT Resistor Divider Ratio 31.6 31.85 32.2 l: full operating temperature range 3
FBP Pin Bias Current 1.3 30 nA VFBP = 0.5V, current flows out of pin; l 3
SHDN Minimum Input Voltage High 1.2 1.3 1.45 V SHDN rising; l 3
SHDN Input Voltage Low 0.3 V 3
SHDN Hysteresis Current 0.08 0.1 0.14 µA Note 3 3
SHDN Pin Bias Current 0 1 µA VSHDN = 3V 3
SHDN Pin Bias Current 2 3 µA VSHDN = 16V 3
Thermal Resistance Junction-to-Ambient θJA 88 °C/W DC8 2mm × 2mm DFN as printed with TJMAX = 125°C 2

CAD (KiCad official)

  • Symbol: LT8410EDC-1#TRMPBF
  • Footprint: Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.45mm_EP0.64x1.37mm
  • 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: lt8410edc-1-trmpbf-etched.step / lt8410edc-1-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8410edc-1-trmpbf.step / lt8410edc-1-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 49728aa30a801127, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF