component
ADS8341E
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADS8341E
Texas Instruments · Analog To Digital Converters (ADC) · SSOP-16-150mil
ADS8341E from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +VCC | power_in | Power supply input, 2.7V to 5V. |
| 2 | CH0 | input | Analog input channel 0 for single-ended or differential conversion. |
| 3 | CH1 | input | Analog input channel 1 for single-ended or differential conversion. |
| 4 | CH2 | input | Analog input channel 2 for single-ended or differential conversion. |
| 5 | CH3 | input | Analog input channel 3 for single-ended or differential conversion. |
| 6 | COM | input | Ground reference for analog inputs; sets zero code voltage in single-ended mode. |
| 7 | SHDN | input | Shutdown control input; device enters low power shutdown mode when LOW. |
| 8 | VREF | power_in | Voltage reference input, range 0.5V to VCC. |
| 9 | +VCC | power_in | Power supply input, 2.7V to 5V. |
| 10 | GND | power_in | Analog ground connection. |
| 11 | GND | power_in | Analog ground connection. |
| 12 | DOUT | tri_state | Serial data output with high impedance when CS is HIGH; data shifted on falling edge of DCLK. |
| 13 | BUSY | tri_state | Busy output indicator with high impedance when CS is HIGH. |
| 14 | DIN | input | Serial data input; data is latched on rising edge of DCLK when CS is LOW. |
| 15 | CS | input | Chip select input; controls conversion timing and enables serial input/output register. |
| 16 | DCLK | input | External clock input that runs the SAR conversion process and synchronizes serial data I/O; maximum frequency 2.4MHz to achieve 100kHz sampling rate. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
ADS8341E - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
ads8341e-etched.step/ads8341e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads8341e.step/ads8341e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
db2638b107dd3c5e, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).