3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownREG113NA-5
The maker sells this part only as REG113NA-5/250, REG113NA-5/3K (TI package option addendum / ordering table: the slash suffix is the reel quantity (tape and reel); the bare code is not orderable (p.13)). The DigiKey and Mouser numbers on this page are for REG113NA-5/250.
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
REG113NA-5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input voltage with operating range 1.8V to 10V and absolute maximum rating -0.3V to 12V |
| 2 | GND | power_in | Ground reference |
| 3 | Enable | input | Enable input, active high; output enabled when 1.8V to VIN, disabled when -0.2V to 0.5V |
| 4 | NR | output | Noise reduction reference output pin for optional external filtering capacitor to ground, voltage range -0.3V to 6.0V |
| 5 | VOUT | power_out | Regulated output voltage (5.0V nominal), 400mA peak current capability, 250mV typical dropout at 400mA |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Accuracy | -1.5 | 0.5 | 1.5 | % | 3 | ||
| Accuracy over temperature | -2.3 | 2.3 | % | Over temperature | 3 | ||
| VOUT temperature coefficient vs temperature | dVOUT/dT | -2.3 | 50 | 2.3 | ppm/°C | vs temperature | 3 |
| Output voltage vs line and load | -2.3 | 1 | 2.3 | % | IOUT = 5mA to 400mA, VIN = (VOUT + 0.4V) to 10V | 3 | |
| Output voltage vs line and load over temperature | -3 | 3 | % | Over temperature, IOUT = 5mA to 400mA, VIN = (VOUT + 0.6V) to 10V | 3 | ||
| DC dropout voltage | VDROP | 4 | 10 | mV | IOUT = 5mA | 3 | |
| DC dropout voltage | VDROP | 250 | 325 | mV | IOUT = 400mA | 3 | |
| DC dropout voltage over temperature | VDROP | 410 | mV | Over temperature, IOUT = 400mA | 3 | ||
| Current limit | ICL | 425 | 500 | 575 | mA | 3 | |
| Current limit over temperature | ICL | 600 | mA | Over temperature | 3 | ||
| Enable voltage high (output enabled) | VENABLE | 1.8 | V | VENABLE HIGH (output enabled); maximum printed as VIN | 3 | ||
| Enable voltage low (output disabled) | VENABLE | -0.2 | 0.5 | V | VENABLE LOW (output disabled) | 3 | |
| Enable pin input current high | IENABLE | 1 | 100 | nA | VENABLE = 1.8V to VIN, VIN = 1.8V to 6.5(4) | 3 | |
| Enable pin input current low | IENABLE | 2 | 100 | nA | VENABLE = 0V to 0.5V | 3 | |
| Ground pin current | IGND | 400 | 500 | µA | IOUT = 5mA | 3 | |
| Ground pin current | IGND | 850 | 1000 | µA | IOUT = 400mA | 3 | |
| Ground pin current with enable pin low | IGND | 0.01 | 0.2 | µA | VENABLE ≤ 0.5V | 3 | |
| Operating input voltage range | VIN | 1.8 | 10 | V | 3 | ||
| Specified input voltage range | VIN | 10 | V | VIN > 1.8V; minimum printed as VOUT + 0.4 | 3 | ||
| Specified input voltage range over temperature | VIN | 10 | V | Over temperature, VIN > 1.8V; minimum printed as VOUT + 0.6 | 3 | ||
| Specified temperature range | TJ | -40 | 85 | °C | 3 | ||
| Operating temperature range | TJ | -55 | 125 | °C | 3 | ||
| Storage temperature range | TA | -65 | 150 | °C | 3 | ||
| Supply input voltage | VIN | -0.3 | 12 | V | 2 | ||
| Enable input voltage | VEN | -0.3 | V | maximum printed as VIN | 2 | ||
| NR pin voltage | VNR | -0.3 | 6 | V | 2 | ||
| Operating temperature range (TJ) | TJ | -55 | 125 | °C | 2 | ||
| Storage temperature range (TA) | TA | -65 | 150 | °C | 2 | ||
| Lead temperature (soldering) | 240 | °C | soldering, 3s | 2 | |||
| Junction-to-ambient thermal resistance, SOT23-5 | θJA | 200 | °C/W | SOT23-5 surface-mount, junction-to-ambient | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | connected to fused leads 5 to 8. See Figure 7 for thermal resistance for varying areas of copper. Using heavier copper | 10 |
CAD (KiCad official)
- Symbol:
REG113NA-5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
reg113na-5-etched.step/reg113na-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);reg113na-5.step/reg113na-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (22 pp, sha256
c0da90b6895895f3, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).