3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHK32F030K6T6
HK · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)
HK32F030K6T6 from HK, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Digital power supply pin (the LQFP32 table lists this pin as VDD with the power-supply class), with VDD stated as 2.0 V to 5.5 V. |
| 2 | PF0 | bidirectional | General-purpose I/O, floating input during and after reset, with I2C1_SDA as its alternate function and OSC_IN as an additional function. |
| 3 | PF1 | bidirectional | General-purpose I/O, floating input during and after reset, with I2C1_SCL as its alternate function and OSC_OUT as an additional function. |
| 4 | NRST | bidirectional | Active-low reset input and internal reset output, as listed in the pin table (the datasheet classes this pin as I/O). |
| 5 | VDDA | power_in | Analog power supply for the ADC and temperature-sensor analog part, with VDDA stated as 2.0 V to 5.5 V. |
| 6 | PA0 | bidirectional | General-purpose I/O with USART1_CTS and ADC_IN0 as alternate functions and RTC_TAMP2, WKUP1 and CKI_4 as additional functions. |
| 7 | PA1 | bidirectional | General-purpose I/O with USART1_RTS, USART2_RTS, EVENTOUT, TIM15_CH1N and ADC_IN1 as listed functions. |
| 8 | PA2 | bidirectional | General-purpose I/O with USART1_TX, USART2_TX, TIM15_CH1 and ADC_IN2 as listed functions, and WKUP4 as an additional function. |
| 9 | PA3 | bidirectional | General-purpose I/O with USART1_RX, USART2_RX, TIM15_CH2 and ADC_IN3 as listed functions. |
| 10 | PA4 | bidirectional | General-purpose I/O with SPI1_NSS, USART1_CK, USART2_CK, TIM14_CH1 and ADC_IN4 as listed functions, and CKI_1 as an additional function. |
| 11 | PA5 | bidirectional | General-purpose I/O with SPI1_SCK and ADC_IN5 as listed functions. |
| 12 | PA6 | bidirectional | General-purpose I/O with SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1, EVENTOUT and ADC_IN6 as listed functions, and WKUP10 as an additional function. |
| 13 | PA7 | bidirectional | General-purpose I/O with SPI1_MOSI, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, EVENTOUT, MCO and ADC_IN7 as listed functions, and WKUP11 as an additional function. |
| 14 | PB0 | bidirectional | General-purpose I/O with TIM3_CH3, TIM1_CH2N, EVENTOUT and ADC_IN8 as listed functions. |
| 15 | PB1 | bidirectional | General-purpose I/O with TIM3_CH4, TIM14_CH1, TIM1_CH3N and ADC_IN9 as listed functions. |
| 16 | VSS | power_in | Ground pin. |
| 17 | VDD | power_in | Digital power supply pin, with VDD stated as 2.0 V to 5.5 V and supplying the I/O pins and internal LDO. |
| 18 | PA8 | bidirectional | General-purpose I/O with USART1_CK, TIM1_CH1, EVENTOUT and MCO as listed functions. |
| 19 | PA9 | bidirectional | General-purpose I/O with USART1_TX, TIM1_CH2, TIM15_BKIN, I2C1_SCL and MCO as listed functions, and WKUP12 as an additional function. |
| 20 | PA10 | bidirectional | General-purpose I/O with USART1_RX, TIM1_CH3, TIM17_BKIN and I2C1_SDA as listed functions, and WKUP13 as an additional function. |
| 21 | PA11 | bidirectional | General-purpose I/O with USART1_CTS, TIM1_CH4, EVENTOUT and I2C2_SCL as listed functions. |
| 22 | PA12 | bidirectional | General-purpose I/O with USART1_RTS, TIM1_ETR, EVENTOUT and I2C2_SDA as listed functions. |
| 23 | PA13 | bidirectional | General-purpose I/O with IR_OUT and SWDIO as listed functions, and CKI_2 as an additional function. |
| 24 | PA14 | bidirectional | General-purpose I/O with USART1_TX, USART2_TX and SWCLK as listed functions, and CKI_3 as an additional function. |
| 25 | PA15 | bidirectional | General-purpose I/O with SPI1_NSS, USART1_RX, USART2_RX and EVENTOUT as listed functions. |
| 26 | PB3 | bidirectional | General-purpose I/O with SPI1_SCK and EVENTOUT as listed functions. |
| 27 | PB4 | bidirectional | General-purpose I/O with SPI1_MISO, TIM3_CH1, EVENTOUT and BKIN as listed functions. |
| 28 | PB5 | bidirectional | General-purpose I/O with SPI1_MOSI, I2C1_SMBA, TIM16_BKIN and TIM3_CH2 as listed functions. |
| 29 | PB6 | bidirectional | General-purpose I/O with I2C1_SCL, USART1_TX and TIM16_CH1N as listed functions. |
| 30 | PB7 | bidirectional | General-purpose I/O with I2C1_SDA, USART1_RX, TIM17_CH1N and USART4_CTS as listed functions. |
| 31 | BOOT0 | input | Boot memory selection input, used with the other boot pins to select user flash, system memory or internal SRAM boot at startup. |
| 32 | VSS | power_in | Ground pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HK |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD-VSS, incl. VDDA and VDD) | VDD-VSS | -0.5 | 6 | V | 26 | ||
| Voltage difference between different supply pins | /ΔVDDx/ | 50 | mV | 26 | |||
| Voltage difference between different ground pins | /VSSX −VSS/ | 50 | mV | 26 | |||
| Total current through VDD/VDDA supply line (supply current) | IVDD | 150 | mA | 26 | |||
| Total current through VSS ground line (sink current) | IVSS | 150 | mA | 26 | |||
| Output sink current on any I/O and control pin | IIO | 25 | mA | 26 | |||
| Output source current on any I/O and control pin | IIO | -25 | mA | 26 | |||
| Injected current on pin | IINJ(PIN) | -5 | 5 | mA | 26 | ||
| Total injected current, all I/O and control pins | ΣIINJ(PIN) | -25 | 25 | mA | 26 | ||
| Storage temperature range | TSTG | -45 | 150 | °C | 26 | ||
| Maximum junction temperature | TJ | 125 | °C | 26 | |||
| Internal AHB clock frequency | fHCLK | 0 | 72 | MHz | 27 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 72 | MHz | 27 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 72 | MHz | 27 | ||
| Standard operating voltage | VDD | 2 | 5.5 | V | 27 | ||
| Analog operating voltage | VDDA | 2 | 5.5 | V | 27 | ||
| Operating temperature | T | -40 | 105 | °C | 27 | ||
| Power-on reset delay (rstn setup time) | Tdelay | 40 | us | 27 | |||
| Power-on reset threshold | VThreshold | 1.75 | V | 27 | |||
| PVD detection level, rising edge | VPVD | 2.183 | 2.188 | 2.196 | V | PLS[2:0]=000 | 27 |
| PVD detection level, rising edge | VPVD | 2.286 | 2.289 | 2.298 | V | PLS[2:0]=001 | 27 |
| PVD detection level, rising edge | VPVD | 2.393 | 2.399 | 2.407 | V | PLS[2:0]=010 | 27 |
| PVD detection level, rising edge | VPVD | 2.502 | 2.508 | 2.518 | V | PLS[2:0]=011 | 27 |
| PVD detection level, rising edge | VPVD | 2.621 | 2.629 | 2.639 | V | PLS[2:0]=100 | 27 |
| PVD detection level, rising edge | VPVD | 2.726 | 2.733 | 2.745 | V | PLS[2:0]=101 | 27 |
| PVD detection level, rising edge | VPVD | 2.839 | 2.846 | 2.855 | V | PLS[2:0]=110 | 27 |
| PVD detection level, rising edge | VPVD | 2.958 | 2.969 | 2.979 | V | PLS[2:0]=111 | 27 |
| External high-speed clock (HSE) frequency | fHSE_ext | 1 | 8 | 25 | MHz | 28 | |
| HSE input high/low level time | Tw(HSE) | 5 | ns | 28 | |||
| HSE rise/fall time | Tr(HSE)/Tf(HSE) | 20 | ns | 28 | |||
| HSE duty cycle | DuCy(HSE) | 45 | 55 | % | 28 | ||
| External low-speed clock (LSE) frequency | FLSE_ext | 32.768 | 1000 | kHz | 28 | ||
| LSE input high/low level time | Tw(LSE) | 450 | ns | 29 | |||
| LSE rise/fall time | Tr(LSE)/Tf(LSE) | 50 | ns | 29 | |||
| LSE duty cycle | DuCy(LSE) | 30 | 70 | % | 29 | ||
| HSI duty cycle | DuCy(HSI) | 45 | 55 | % | 29 | ||
| HSI oscillator accuracy after RCC_CR calibration | ACCHSI | 1 | % | RCC_CR 寄存器校准后 | 29 | ||
| HSI oscillator accuracy, factory calibrated | ACCHSI | -2 | 2.5 | % | 工厂校准 TA= -40 to 105 °C | 29 | |
| HSI oscillator accuracy, factory calibrated | ACCHSI | -1.5 | 2.2 | % | 工厂校准 TA= -40 to 85 °C | 29 | |
| HSI oscillator accuracy, factory calibrated | ACCHSI | -1.3 | 2 | % | 工厂校准 TA = 0 to 70 °C | 29 | |
| HSI oscillator accuracy, factory calibrated | ACCHSI | -1.1 | 1.8 | % | 工厂校准 TA = 25 °C | 29 | |
| HSI oscillator startup time | Tsu(HSI) | 1 | 2 | us | VSS≤VIN≤VDD | 29 | |
| HSI oscillator power consumption | IDD(HSI) | 80 | 100 | uA | 29 | ||
| LSI clock frequency | fLSI | 30 | 40 | 60 | kHz | 29 | |
| LSI oscillator startup time | tsu(LSI) | 85 | us | 29 | |||
| PLL input clock frequency | fPLL_IN | 1 | 8 | 25 | MHz | 29 | |
| PLL input clock duty cycle | 40 | 60 | % | 29 | |||
| PLL output clock frequency | fPLL_OUT | 16 | 72 | MHz | 29 | ||
| PLL lock time | tLOCK | 200 | us | 29 | |||
| PLL cycle jitter | Jitter | 300 | ps | 29 | |||
| Half-word program current | IDDPROG | 5 | mA | 30 | |||
| Page/chip erase current | IDDERASE | 2 | mA | 30 | |||
| Read current | IDDREAD | 2 | 3 | mA | @24MHz | 30 | |
| Read current | IDDREAD | 0.25 | 0.4 | mA | @1MHz | 30 | |
| Flash endurance (erase/write cycles) | NEND | 1 | 千次 | 30 | |||
| Data retention time | tRET | 20 | 年 | 30 | |||
| Half-word write time | TPROG | 25 | µs | 30 | |||
| Word write time | TPROG | 33 | µs | 30 | |||
| Half-page erase time | TERASE | 9.2 | ms | 30 | |||
| Page erase time | TERASE | 4.6 | ms | 30 |
CAD (KiCad official)
- Symbol:
HK32F030K6T6 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
hk32f030k6t6-etched.step/hk32f030k6t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hk32f030k6t6.step/hk32f030k6t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HK datasheet (55 pp, sha256
d24623b7c7930a3a, retrieved 2026-10-30, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).