component
HACS712ELCTR-30A-T
Public Made by Adomby adom
HXY MOSFET Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHACS712ELCTR-30A-T
HXY MOSFET · Current Sensors · SOP-8
HACS712ELCTR-30A-T from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Positive current input terminal of the low-impedance main current loop; the measured current enters here and the terminal withstands a transient surge of 100 A for a 100 ms pulse. |
| 2 | IP+ | passive | Positive current input terminal, shorted to pin 1 in the typical application to form the measured-current input; the transient surge limit is 100 A for a 100 ms pulse. |
| 3 | IP- | passive | Negative current input terminal of the main current loop, where the measured current exits; the transient surge limit is 100 A for a 100 ms pulse. |
| 4 | IP- | passive | Negative current input terminal, shorted to pin 3 in the typical application; the transient surge limit is 100 A for a 100 ms pulse. |
| 5 | GND | power_in | Ground reference pin, to which the VCC filter capacitor CVcc and the optional output filter capacitor CVout are connected. |
| 6 | TEST | unconnected | Factory testing pin listed as floating; the datasheet gives no function for it in application, so it should be left unconnected. |
| 7 | OUT | output | Analog output proportional to the measured current, with a static level of 50% VCC at zero current; it must not exceed VCC-0.5 V, with a source limit of 80 mA, a sink limit of 40 mA, and a load capacitance of 0.5 to 1 nF to GND. |
| 8 | VCC | power_in | Supply pin with an operating range of 4.5 V to 5.5 V (typ. 5 V) and an absolute maximum of 6 V, decoupled to GND with filter capacitor CVcc. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | VCC | 4.5 | 5 | 5.5 | V | 4 | |
| Operating current | ICC | 9 | 11.18 | 13 | mA | TA=25°C,Output No Load | 4 |
| Quiescent Point | Voq | 2.485 | 2.5 | 2.515 | V | TA=25°C,CL=1nF,sensitivity 2mV/Gs,BWf=Bwi | 5 |
| Maximum current source | ISCLP | 80 | mA | 4 | |||
| Maximum sink current | ISCLN | 40 | mA | 4 | |||
| Total Output Error | -3 | 3 | % | 6 | |||
| Power supply voltage | VCC | 6 | V | 3 | |||
| Output current source | IOUT(source) | 80 | mA | 3 | |||
| Output current sink | IOUT(sink) | 40 | mA | 3 | |||
| Working Environment Temperature | TA | -40 | 150 | °C | 3 | ||
| Storage Temperature | TS | -65 | 170 | °C | 3 | ||
| Maximum Junction Temperature | TJ | 165 | °C | 3 | |||
| Endurance EEPROM Programming cycle number | 200 | cycle | 3 | ||||
| Transient surge current at current sampling terminal IP | 100 | A | pulse 100ms | 3 | |||
| Human Body Model ESD | VESD | 5 | kV | JEDEC JS-001-2017 | 3 |
CAD (KiCad official)
- Symbol:
HACS712ELCTR-30A-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hacs712elctr-30a-t-etched.step/hacs712elctr-30a-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hacs712elctr-30a-t.step/hacs712elctr-30a-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (14 pp, sha256
5be6921558673890, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).