OPA340
Public Unreviewedby Ray
TI single rail-to-rail op-amp, SOT-23-5. 5.5 MHz, single 2.5-5.5 V supply, low distortion. Datasheet-verified.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗README
markdownOPA340
Texas Instruments · Operational amplifier · SOT-23-5
Single op-amp with rail-to-rail input and output on a single 2.5 to 5.5 V supply, offering 5.5 MHz of bandwidth with low distortion in a SOT-23-5. It swings to within millivolts of both rails and drives ADC inputs and light loads cleanly, which suits it to single-supply data-acquisition front ends and audio buffering on 3.3 and 5 V boards. A general-purpose rail-to-rail single with more bandwidth than the low-cost commodity parts, the single of the OPA340/2340/4340 family.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. Rail-to-rail output stage swings within 1 mV of either supply rail with a 100-kOhm load. Short-circuit protected to ground (one amplifier per package). |
| 2 | V- | power_in | Negative (lowest) power supply. Tie to GND for single-supply operation or to a negative rail for dual-supply operation. Total supply span (V+) - (V-) must not exceed 5.5 V. |
| 3 | +IN | input | Positive (noninverting) input. Rail-to-rail input common-mode voltage range extends 500 mV below V- and 500 mV above V+. Input signals swinging more than 0.5 V beyond the rails should be current-limited to <=10 mA (diode-clamped to supplies). |
| 4 | -IN | input | Negative (inverting) input. Rail-to-rail input common-mode voltage range extends 500 mV below V- and 500 mV above V+. Diode-clamped to supplies; limit signal current beyond rails to <=10 mA. |
| 5 | V+ | power_in | Positive (highest) power supply. Operating range 2.7 V to 5.5 V (single supply) with (V+) - (V-) not exceeding 5.5 V. Bypass with 0.1 uF ceramic to V-/GND close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Type | Single rail-to-rail op-amp |
| Gain-bandwidth | 5.5 MHz |
| Supply | 2.5-5.5 V (single) |
| Output | Rail-to-rail |
| Slew rate | 6 V/us |
| Input offset | 150 uV (typ) |
| Package | SOT-23-5 |
Ordering variants
Same part, different packaging or reel option.
OPA340NA (SOT-23-5)OPA340UA (SOIC-8)OPA2340UA (dual, SOIC-8)
CAD (KiCad official)
- Symbol:
Amplifier_Operational:OPA340NA (KiCad official) - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
8099f9f9e8e49c45, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).