Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD8330ARQZ-R7

Analog Devices · Programmable/Variable Gain Amplifiers (PGAs/VGAs) · SSOP-16-150mil

AD8330ARQZ-R7 from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OFST passive Internal offset compensation feature: when left unconnected the feature is enabled, and when grounded it is disabled, with an external capacitor setting the offset loop high-pass corner.
2 ENBL input Power enable, active high.
3 VPSI power_in Positive supply for input stages; the specifications are given at VS = 5 V and the device operates from 2.7 V to 6 V with a 6 V absolute maximum supply.
4 INHI input Differential signal input, positive polarity, with a full-scale differential input of ±2 V at VDBS = 0 V and a 1 kΩ typical pin-to-pin input resistance.
5 INLO input Differential signal input, negative polarity, with a 1 kΩ typical pin-to-pin input resistance paired with INHI.
6 MODE input Logic input selecting gain slope: logic high (1.5 V) gives gain increasing with VDBS, and logic low (0.5 V) gives gain decreasing with VDBS.
7 VDBS input Input for the linear-in-dB gain control voltage, giving 0 dB to 50 dB gain for 0 V to 1.5 V at 30 mV/dB nominal.
8 CMGN passive Common baseline for the gain control interfaces; connect to COMM for the normal 0 V to 1.5 V VDBS range, or leave open for the elevated 0.2 V to 1.7 V range.
9 COMM power_in Ground for input and gain control bias circuitry.
10 VMAG input Input for gain/amplitude control; it internally defaults to 0.5 V when open, giving a peak output of ±2 V, and can be raised to 10 V p-p, limited by the supply voltage.
11 CMOP power_in Ground for output stages.
12 OPLO output Differential signal output, negative polarity, with 75 Ω output resistance per output and an essentially rail-to-rail swing into single-sided loads.
13 OPHI output Differential signal output, positive polarity, with 75 Ω output resistance per output and an essentially rail-to-rail swing into single-sided loads.
14 VPSO power_in Positive supply for output stages.
15 CNTR input Common-mode output voltage control, with a usable range of 0.5 V to 4.5 V that can be driven to within 0.5 V of ground or VS; the outputs default to VS/2.
16 VPOS power_in Positive supply for inner stages.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-16-150mil
Category Operational Amplifier/Comparator
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-Mode Voltage Level (INHI, INLO) 2.75 3 3.25 V 3
Permissible CM Range 0 V 3
Peak-to-Peak Output Swing 1.8 2 2.2 V 3
Common-Mode Voltage, Pin CNTR O/C 2.4 2.5 2.6 V Pin CNTR O/C 3
Offset Voltage, Offset Correction Enabled -5 1 5 mV Offset correction enabled 3
Offset Voltage, Offset Correction Disabled -40 8 40 mV Pin OFST connected to ground 3
Differential Output Impedance 120 150 180 Ω Pin-to-pin 3
Usable Voltage Range, Pin CNTR 0.5 4.5 V 3
Normal Voltage Range, VDBS/CMGN/MODE 0 1.5 V CMGN connected to COMM 3
Elevated Voltage Range, VDBS/CMGN/MODE 0.2 1.7 V CMGN O/C (VCMGN rises to 0.2 V) 3
Gain Scaling 27 30 33 mV/dB Mode high or low 3
Gain Linearity Error -0.35 0.1 0.35 dB 0.3 V ≤ VDBS ≤ 1.2 V 3
Absolute Gain Error -2 0.5 2 dB VDBS = 0 V 3
Peak Output Scaling, Gain vs. VMAG 3.8 4 4.2 V/V 4
Usable Input Range, Pin VMAG 0 5 V 4
Default Voltage, VMAG 0.48 0.5 0.52 V VMAG O/C 4
Logic Voltage for Hibernate Mode 1.3 1.5 1.7 V Output pins remain at CNTR 4
Current in Full Shutdown 20 100 µA 4
Supply Voltage VS 2.7 6 V 4
Quiescent Current 20 27 mA VDBS = 0.75 V 4
Supply Voltage (absolute maximum) 6 V 5
Power Dissipation, 16-Lead QSOP Package 0.62 W 4-layer JEDEC board (252P) 5
Storage Temperature Range -65 150 °C 5
Lead Temperature (Soldering) 300 °C Soldering 60 sec 5
Operating Temperature Range -40 85 °C 5
Thermal Resistance θJA, 16-Lead QSOP θJA 105.4 °C/W 5
Thermal Resistance θJC, 16-Lead QSOP θJC 39 °C/W 5

CAD (KiCad official)

  • Symbol: AD8330ARQZ-R7
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: ad8330arqz-r7-etched.step / ad8330arqz-r7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad8330arqz-r7.step / ad8330arqz-r7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (32 pp, sha256 1f0f9ebcbdcc9778, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF