component
L6598D013TR
Public Made by Adomby adom
STMicroelectronics AC-DC Controllers And Regulators, SO-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownL6598D013TR
STMicroelectronics · AC-DC Controllers And Regulators · SO-16
L6598D013TR from STMicroelectronics, in a SO-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CSS | passive | Soft-start timing capacitor; the soft-start constant kSS is 0.15 s/µF typical (0.115 to 0.185 s/µF), so the soft-start time depends only on this capacitor. |
| 2 | Rfstart | input | Soft-start frequency setting pin, to be driven from a low impedance voltage source, with forced input voltage limited to -0.3 V to 5 V. |
| 3 | Cf | passive | Oscillator frequency setting capacitor pin (470 pF in the test conditions), with forced input voltage limited to -0.3 V to 5 V. |
| 4 | Rfmin | input | Minimum oscillation frequency setting pin, to be driven from a low impedance voltage source, with forced input voltage limited to -0.3 V to 5 V. |
| 5 | OPout | output | Sense op amp output, with low impedance; the forced output voltage is limited to 4.6 V. |
| 6 | OPon- | input | Sense op amp inverting input, high impedance, with input common mode range of -0.2 V to 3 V. |
| 7 | OPon+ | input | Sense op amp non-inverting input, high impedance, with input common mode range of -0.2 V to 3 V. |
| 8 | EN1 | input | Half bridge latched enable, active high with a 0.6 V typical threshold (0.56 to 0.64 V) that latches the device in shutdown. |
| 9 | EN2 | input | Half bridge unlatched enable, active high with a 1.2 V typical threshold (1.05 to 1.35 V) that restarts a soft-start sequence. |
| 10 | GND | power_in | Ground reference; the internal clamping Zener of the Vs pin is connected between GND and Vs. |
| 11 | LVG | output | Low side driver output, with 250 mA typical source and 450 mA typical sink capability and 80/40 ns typical rise/fall times at 1 nF load. |
| 12 | Vs | power_in | Supply voltage with internal Zener clamp at 14.6 to 16.6 V; it must not be supplied by a low impedance voltage source and the clamp current is limited to 25 mA, with recommended supply range of 10 V to Vcl. |
| 13 | N.C. | unconnected | Not connected. |
| 14 | OUT | passive | High side driver reference, with recommended voltage range of -1 V to VBOOT - Vcl and output slew rate of ±50 V/ns (repetitive). |
| 15 | HVG | output | High side driver output, with 250 mA typical source and 450 mA typical sink capability and 80/40 ns typical rise/fall times at 1 nF load. |
| 16 | Vboot | power_in | Bootstrapped floating supply; recommended floating supply rail is 500 V with absolute maximum of 618 V and slew rate of ±50 V/ns (repetitive). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-16 |
| Category | Power Management (PMIC) |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
L6598D013TR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SO-16 (KiCad packages3D, STEP)
- 3D model files:
l6598d013tr-etched.step/l6598d013tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l6598d013tr.step/l6598d013tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (23 pp, sha256
f6c40ba0afb439ed, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).