component
SN65MLVD2DRBR
Public Made by Adomby adom
Texas Instruments LVDS ICs, SON-8-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN65MLVD2DRBR
Texas Instruments · LVDS ICs · SON-8-EP(3x3)
SN65MLVD2DRBR from Texas Instruments, in a SON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage with recommended operating range 3 V to 3.6 V. |
| 2 | RE | input | Receiver enable input, active low; receiver enabled when RE = low, disabled when RE = high. |
| 3 | R | tri_state | Data output from receiver with high-level output voltage 2.4 V minimum and low-level output voltage 0.4 V maximum; high-impedance when disabled. |
| 4 | GND | power_in | Circuit ground connection. |
| 5 | GND | power_in | Circuit ground connection. |
| 6 | A | input | M-LVDS non-inverting input with operating voltage range -1.4 V to 3.8 V. |
| 7 | B | input | M-LVDS inverting input with operating voltage range -1.4 V to 3.8 V. |
| 8 | VCC | power_in | Supply voltage with recommended operating range 3 V to 3.6 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SON-8-EP(3x3) |
| Category | Interface |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
SN65MLVD2DRBR - Footprint:
Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm - 3D model: SON-8-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
sn65mlvd2drbr-etched.step/sn65mlvd2drbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65mlvd2drbr.step/sn65mlvd2drbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
7b21fb01fb2924b9, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).