Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC2544-2YM-TR

Microchip Tech · Power Management Specialized - PMIC · SOIC-8

MIC2544-2YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Logic-compatible enable input, active-low for the MIC2544-2 (high >1.7V typ, low <1.5V typ), must not be floated and must not exceed VIN or go below GND.
2 FLG output Active-low open-drain fault flag output that indicates overcurrent or thermal shutdown conditions and can sink 10 mA to typically 100 mV above ground.
3 GND power_in Ground.
4 ILIM passive Current-limit set pin: an external resistor RSET to ground sets the threshold (ILIMIT = 230V/RSET) with 154 Ω < RSET < 2.29 kΩ.
5 NC unconnected Not internally connected.
6 OUT power_out Switch output (output MOSFET source) that must be externally connected to pin 8.
7 IN power_in Input supply (2.7V to 5.5V operating) that is the output MOSFET drain and also powers the internal circuitry.
8 OUT power_out Switch output (output MOSFET source) that must be externally connected to pin 6.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Current, switch off IIN 0.75 5 µA Switch off, OUT = Open (Note 2) 4
Supply Current, switch on IIN 75 160 µA Switch on, OUT = Open (Note 2) 4
Enable Input Voltage, high VEN 2.4 1.7 V Enable High, (Note 2) 4
Enable Input Voltage, low VEN 1.5 0.8 V Enable Low, (Note 2) 4
Switch Resistance RDS(ON) 80 120 mΩ IOUT = 500 mA 4
Current Limit Factor (100 mA to 1 A) 184 230 276 V IOUT = 100 mA to 1A, VOUT = 1V to 4V, (Note 4) 4
Current Limit Factor (500 mA to 1.5 A) 161 230 299 V IOUT = 500 mA to 1.5A, VOUT = 1V to 4V, (Note 4) 4
Output Leakage Current 1 10 µA Switch off 4
Output Turn-On Delay tON 1 2 5 ms RL = 10Ω, CL = 1 µF, Figure 4-2, Figure 4-3 4
Output Turn-On Rise Time tR 1 2 5 ms RL = 10Ω, CL = 1 µF, Figure 4-2, Figure 4-3 4
Error Flag Output Resistance (VIN = 5V) 4 15 Ω VIN = 5V, IL = 10 μA 4
Error Flag Output Resistance (VIN = 3.3V) 5 20 Ω VIN = 3.3V, IL = 10 μA 4
Error Flag Off Current 0.01 1 µA VFLG = 5V 4
Supply Voltage (absolute maximum) VIN 7 V 3
Output Voltage (absolute maximum) VOUT -0.3 7 V 3
Enable Input (absolute maximum) VEN -0.3 7 V -0.3V to VIN+0.3V (printed as VIN+0.3V) 3
Fault Flag Voltage VFLG 7 V 3
ESD Rating 2 kV Human body model, 1.5 kΩ in series with 100 pF 3
Supply Voltage (operating) VIN 2.7 5.5 V 3
Current Limit Set Range 0.1 1.5 A 3
Storage Temperature Range TS -65 150 °C 5
Lead Temperature 260 °C Soldering, 5 sec. 5
Ambient Temperature TA -40 85 °C 5
Thermal Resistance, 8-Ld SOIC θJA 160 °C/W 5
Output Turn-Off Delay tOFF 22 µs RL = 10Ω, CL = 1 µF, Figure 4-2, Figure 4-3 4
Output Turn-Off Fall Time tF 21 µs RL = 10Ω, CL = 1 µF, Figure 4-2, Figure 4-3 4
Overtemperature Threshold, TJ increasing 140 °C TJ increasing 4
Overtemperature Threshold, TJ decreasing 130 °C TJ decreasing 4
Current-Limit Response Time 25 µs VOUT = 0V, (Note 4) 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper Please note that the MSOP package uses pin 5 for ILIM. Pin 4 is not connected (NC). Bold lines indicate 0.1” wide, 1 oz. copper high-current traces. 15

CAD (KiCad official)

  • Symbol: MIC2544-2YM-TR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic2544-2ym-tr-etched.step / mic2544-2ym-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic2544-2ym-tr.step / mic2544-2ym-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (24 pp, sha256 eca2c5fcf07364df, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF