Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UCD3138RHAR

Texas Instruments · Monitors & Reset Circuits · VQFN-40-EP(6x6)

UCD3138RHAR from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AGND power_in Analog ground; the difference between DGND and AGND must not exceed 0.3 V.
2 AD13 input 12-bit ADC channel 13, connected to comparator E, with an alternate I-share DAC output function; all pins are limited to -0.3 V to 3.8 V referenced to DGND.
3 AD06 input 12-bit ADC channel 6, connected to comparator F, with an alternate DAC output function; all pins are limited to -0.3 V to 3.8 V referenced to DGND.
4 AD04 input 12-bit ADC channel 4, connected to comparator D, with an alternate DAC output function; all pins are limited to -0.3 V to 3.8 V referenced to DGND.
5 AD03 input 12-bit ADC channel 3, connected to comparators B and C to support simple OVP and UVP connections.
6 DGND power_in Digital ground.
7 RESET input Active-low device reset input.
8 ADC_EXT_TRIG input External trigger input for ADC conversions; alternate functions TCAP, SYNC and PWM0, and configurable as GPIO.
9 PMBUS_CLK bidirectional PMBus/I2C clock with open-drain output; alternate function SCI_TX0, and configurable as GPIO.
10 PMBUS_DATA bidirectional PMBus data with open-drain output; alternate function SCI_RX0, and configurable as GPIO.
11 DPWM0A output High-resolution DPWM 0A output with 250 ps pulse-width resolution, configurable as GPIO.
12 DPWM0B output High-resolution DPWM 0B output with 250 ps pulse-width resolution, configurable as GPIO.
13 DPWM1A output High-resolution DPWM 1A output with 250 ps pulse-width resolution, configurable as GPIO.
14 DPWM1B output High-resolution DPWM 1B output with 250 ps pulse-width resolution, configurable as GPIO.
15 DPWM2A output High-resolution DPWM 2A output with 250 ps pulse-width resolution, configurable as GPIO.
16 DPWM2B output High-resolution DPWM 2B output with 250 ps pulse-width resolution, configurable as GPIO.
17 DPWM3A output High-resolution DPWM 3A output with 250 ps pulse-width resolution, configurable as GPIO.
18 DPWM3B output High-resolution DPWM 3B output with 250 ps pulse-width resolution, configurable as GPIO.
19 PMBUS_ALERT bidirectional PMBus alert with open-drain output, configurable as GPIO.
20 PMBUS_CTRL bidirectional PMBus control with open-drain output, configurable as GPIO.
21 TCK input JTAG TCK, for debugging or manufacturer test only; alternate functions TCAP, SYNC and PWM0.
22 TDO output JTAG TDO, for debugging or manufacturer test only; alternate functions SCI_TX0, PMBUS_ALERT and FAULT0.
23 TDI input JTAG TDI, for debugging or manufacturer test only; alternate functions SCI_RX0, PMBUS_CTRL and FAULT1.
24 TMS input JTAG TMS, for debugging or manufacturer test only.
25 FAULT2 input External fault input 2, configurable as GPIO.
26 DGND power_in Digital ground.
27 V33D power_in Digital 3.3-V core supply; recommended operating range 3.0 V to 3.6 V (3.3 V nominal).
28 BP18 power_out 1.8-V bypass pin; recommended operating range 1.6 V to 2.0 V, and a 2.2-µF capacitor is required from V33D to BP18.
29 AGND power_in Substrate analog ground.
30 AGND power_in Analog ground.
31 EAP0 input Channel 0 differential analog voltage positive input to the EADC; all pins are limited to -0.3 V to 3.8 V referenced to DGND.
32 EAN0 input Channel 0 differential analog voltage negative input to the EADC; all pins are limited to -0.3 V to 3.8 V referenced to DGND.
33 EAP1 input Channel 1 differential analog voltage positive input to the EADC; all pins are limited to -0.3 V to 3.8 V referenced to DGND.
34 EAN1 input Channel 1 differential analog voltage negative input to the EADC; all pins are limited to -0.3 V to 3.8 V referenced to DGND.
35 EAP2 input Channel 2 differential analog voltage positive input to the EADC, recommended for peak current mode control; all pins are limited to -0.3 V to 3.8 V referenced to DGND.
36 AGND power_in Analog ground.
37 V33A power_in Analog 3.3-V supply; recommended operating range 3.0 V to 3.6 V (3.3 V nominal).
38 AD00 input 12-bit ADC channel 0, connected to a current source used for PMBus address detection; all pins are limited to -0.3 V to 3.8 V referenced to DGND.
39 AD01 input 12-bit ADC channel 1, connected to a current source used for PMBus address detection; all pins are limited to -0.3 V to 3.8 V referenced to DGND.
40 AD02 input 12-bit ADC channel 2, connected to comparator A and used for I-share; all pins are limited to -0.3 V to 3.8 V referenced to DGND.
41 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-40-EP(6x6)
Category Power Supply Chip
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
V33D to DGND V33D -0.3 3.8 V V33D to DGND; over operating free-air temperature range 14
V33DIO to DGND V33DIO -0.3 3.8 V V33DIO to DGND 14
V33A to AGND V33A -0.3 3.8 V V33A to AGND 14
BP18 to DGND BP18 -0.3 2.5 V BP18 to DGND 14
Ground difference /DGND, AGND/ 0.3 V 14
Voltage applied to any pin -0.3 3.8 V All pins, excluding AGND; referenced to DGND 14
Junction temperature TJ -40 150 °C 14
Storage temperature Tstg -55 150 °C 14
Digital power V33D 3 3.3 3.6 V over operating free-air temperature range 14
Digital I/O power V33DIO 3 3.3 3.6 V over operating free-air temperature range 14
Analog power V33A 3 3.3 3.6 V over operating free-air temperature range 14
Junction temperature TJ -40 125 °C over operating free-air temperature range 14
1.8-V digital power BP18 1.6 1.8 2 V over operating free-air temperature range 14
Junction-to-ambient thermal resistance RθJA 31.8 °C/W 40 PIN QFN (RHA) column 14
Junction-to-case (top) thermal resistance RθJC(top) 18.5 °C/W 40 PIN QFN (RHA) column 14
Junction-to-board thermal resistance RθJB 6.8 °C/W 40 PIN QFN (RHA) column 14
Junction-to-top characterization parameter ψJT 0.2 °C/W 40 PIN QFN (RHA) column 14
Junction-to-board characterization parameter ψJB 6.7 °C/W 40 PIN QFN (RHA) column 14
Junction-to-case (bottom) thermal resistance RθJC(bot) 1.8 °C/W 40 PIN QFN (RHA) column 14
Supply current I33A I33A 6.3 mA Measured on V33A. The device is powered up but all ADC12 and EADC sampling is disabled 15
Supply current I33DIO I33DIO 0.35 mA All GPIO and communication pins are open 15
Supply current I33D (ROM program execution) I33D 60 mA ROM program execution 15
Supply current I33D (flash programming) I33D 70 mA Flash programming in ROM mode 15
Supply current I33 I33 100 mA The device is in ROM mode with all DPWMs enabled and switching at 2 MHz. The DPWMs are all unloaded. 15
EAP, AGND error ADC input voltage -0.15 1.998 V 15
EAP, EAN error ADC input voltage -0.256 1.848 V 15
Typical error range -256 248 mV AFE = 0 15
EAP, EAN error voltage digital resolution 0.8 1 1.2 mV AFE = 3 15
EAP, EAN error voltage digital resolution 1.7 2 2.3 mV AFE = 2 15
EAP, EAN error voltage digital resolution 3.55 4 4.45 mV AFE = 1 15
EAP, EAN error voltage digital resolution 6.9 8 9.1 mV AFE = 0 15
Input offset current IOFFSET -5 5 μA See 图 8-4 15
EADC offset -2 2 LSB Input voltage = 0 V at AFE = 0 15
EADC offset -2.5 2.5 LSB Input voltage = 0 V at AFE = 1 15
EADC offset -3 -3 LSB Input voltage = 0 V at AFE = 2 15
EADC offset -4 4 LSB Input voltage = 0 V at AFE = 3 15
EADC DNL -2.1 1.6 LSB Does not include MSB transition 15
EADC INL -3 3 LSB 15
DAC reference voltage 1.58 1.61 V 15
Bias current for PMBus address pins IBIAS 9.5 10.5 μA 15
Internal ADC reference voltage 2.475 2.5 2.525 V -40°C to 125°C 15
ADC12 INL integral nonlinearity -2.5 2.5 LSB ADC_SAMPLINGSEL = 6 for all ADC12 data, 25 °C to 125 °C 16
ADC12 DNL differential nonlinearity -0.7 2.5 LSB 16
ADC Zero Scale Error -7 7 mV 16
ADC Full Scale Error -35 35 mV 16
High-level input voltage VIH 2.1 V V33DIO = 3 V 16
Low-level input voltage VIL 1.1 V V33DIO = 3 V 16
Watchdog time out range TWD 14.6 17 20.5 ms Total time is: TWD × (WDCTRL.PERIOD + 1) 16
Current share current source ISHARE 238 259 μA See 图 9-16 16
Current share resistor RSHARE 9.75 10.3 kΩ See 图 9-16 16
Voltage of sensor range VTEMP 1.46 2.44 V 17
Temperature sensor accuracy -10 10 °C -40°C to 125°C 17
Temperature range -40 125 °C -40°C to 125°C 17
Reference DAC range 0 2.5 V Analog comparator 17
Reference voltage 2.478 2.5 2.513 V Analog comparator 17
Analog comparator INL -0.42 0.21 LSB 17
Analog comparator DNL 0.06 0.12 LSB 17
Analog comparator offset -5.5 19.5 mV 17
Buffer offset 4.6 8.3 mV (-0.5 mA) 17
Buffer offset -0.05 17 mV (1.0 mA) 17

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper Layout section. There should not be any voltage delta between the DGND pins and AGND pins. Multiple vias are required to connect the extended power pad (for example, copper plane under the device powe 68

CAD (KiCad official)

  • Symbol: UCD3138RHAR
  • Footprint: Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm
  • 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: ucd3138rhar-etched.step / ucd3138rhar-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucd3138rhar.step / ucd3138rhar.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (101 pp, sha256 59ab555bffb90212, retrieved 2026-10-28, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF