Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32U031R8T6

ST(意法半导体) · IC · LQFP-64(10x10)

STM32U031R8T6 from ST(意法半导体), in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup domain supply input for the RTC and backup registers, specified at 1.55 to 3.6 V.
2 PC13 bidirectional 5 V-tolerant (FT) I/O supplied through the power switch, which limits it to 3 mA; output speed is limited to 2 MHz at 30 pF and it must not drive current sources such as LEDs.
3 PC14-OSC32_IN bidirectional 5 V-tolerant (FT) I/O supplied through the power switch (3 mA limit) that serves as the 32 kHz oscillator input OSC32_IN.
4 PC15-OSC32_OUT bidirectional 5 V-tolerant (FT) I/O supplied through the power switch (3 mA limit) that serves as the 32 kHz oscillator output OSC32_OUT.
5 PF0-OSC_IN bidirectional 5 V-tolerant (FT) I/O that serves as the high-speed oscillator input OSC_IN, with EVENTOUT as alternate function.
6 PF1-OSC_OUT bidirectional 5 V-tolerant (FT) I/O that serves as the high-speed oscillator output OSC_OUT, with OSC_EN and EVENTOUT as alternate functions.
7 PF2-NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor (NRST); PF2 can also be used as the MCO alternate function.
8 PC0 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; alternates include LPTIM1_IN1, I2C3_SCL, LPUART1_RX, LPUART2_TX, LPTIM2_IN1 and additional function ADC1_IN1.
9 PC1 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA and Fm+ I2C capability; alternates include LPTIM1_CH1, I2C3_SDA, LPUART1_TX, LPUART2_RX and additional function ADC1_IN2.
10 PC2 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; alternates include MCO2, LPTIM1_IN2, SPI2_MISO and additional function ADC1_IN3.
11 PC3 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; this pin has a specific higher input leakage than other FT pins, and alternates include LPTIM1_ETR, SPI2_MOSI, USART4_CK, LPTIM2_ETR and additional function ADC1_IN4.
12 VSSA/VREF- power_in Analog ground and negative reference (VREF-) pin; ground variations between all ground pins, including VREF-, are limited to 50 mV.
13 VDDA/VREF+ power_in Analog supply and positive reference (VREF+) pin; VDDA range is 1.62 to 3.6 V when ADC or COMP is used and minimum 1.8 V when OPAMP is used.
14 PA0 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; alternates include TIM2_CH1, USART2_CTS, USART4_TX, COMP1_OUT, TIM2_ETR and additional functions OPAMP1_VINP, COMP1_INM3, ADC1_IN5, WKUP1, TAMP_IN2.
15 PA1 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; alternates include TIM2_CH2, LPTIM1_CH2, SPI1_SCK, SPI2_SCK, USART2_RTS/USART2_DE, USART4_RX, TIM15_CH1N and additional functions OPAMP1_VINM, COMP1_INP3, ADC1_IN6, WKUP3, TAMP_IN5.
16 PA2 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; alternates include TIM2_CH3, USART2_TX, LPUART1_TX, TIM15_CH1 and additional functions ADC1_IN7, WKUP4/LSCO.
17 PA3 bidirectional 3.6 V-tolerant (TT) I/O with analog switch supplied by VDDA; alternates include TIM2_CH4, USART2_RX, LPUART1_RX, TIM15_CH2 and additional functions OPAMP1_VOUT, ADC1_IN8.
18 VSS power_in Ground pin; all VSS pins must be connected to the ground supply.
19 VDD power_in Main supply pin; standard operating voltage range is 1.71 to 3.6 V.
20 PA4 bidirectional 3.6 V-tolerant (TT) I/O with analog switch supplied by VDDA; alternates include SPI1_NSS, USART2_CK, LPTIM2_CH1 and additional functions COMP1_INM4, ADC1_IN9, DAC1_OUT1.
21 PA5 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; alternates include TIM2_CH1, TIM2_ETR, SPI1_SCK, USART3_TX, LPTIM2_ETR and additional functions COMP1_INM5, ADC1_IN10.
22 PA6 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; alternates include TIM1_BKIN, TIM3_CH1, I2C2_SDA, I2C3_SDA, SPI1_MISO, COMP1_OUT, USART3_CTS, LPUART1_CTS, TSC_G5_IO1, TIM16_CH1 and additional function ADC1_IN11.
23 PA7 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA and Fm+ I2C capability; alternates include TIM1_CH1N, TIM3_CH2, I2C2_SCL, I2C3_SCL, SPI1_MOSI, USART3_RX, LPTIM2_CH2 and additional function ADC1_IN15.
24 PC4 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; alternate USART3_TX and additional functions COMP1_INM1, ADC1_IN16.
25 PC5 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; alternate USART3_RX and additional functions COMP1_INP1, ADC1_IN17, WKUP5, TAMP_IN4.
26 PB0 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; alternates include TIM1_CH2N, TIM3_CH3, SPI1_NSS, USART3_CK, LPUART2_CTS, TSC_G5_IO2, COMP1_OUT and additional function ADC1_IN18.
27 PB1 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; alternates include TIM1_CH3N, TIM3_CH4, USART3_RTS/USART3_DE, LPUART1_RTS/LPUART1_DE, TSC_SYNC, LPUART2_RTS/LPUART2_DE, LPTIM2_IN1 and additional functions COMP1_INM2, ADC1_IN19.
28 PB2 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; alternates include RTC_OUT2 and LPTIM1_CH1 and additional functions COMP1_INP2, RTC_OUT2.
29 PB10 bidirectional 5 V-tolerant (FT) I/O with Fm+ I2C capability; alternates include TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX, LPUART1_RX, TSC_G5_IO3, LPUART2_RX, COMP1_OUT.
30 PB11 bidirectional 5 V-tolerant (FT) I/O with Fm+ I2C capability; alternates include TIM2_CH4, I2C2_SDA, USART3_RX, LPUART1_TX, TSC_G5_IO4, LPUART2_TX.
31 VSS power_in Ground pin; all VSS pins must be connected to the ground supply.
32 VDD power_in Main supply pin; standard operating voltage range is 1.71 to 3.6 V.
33 PB12 bidirectional 5 V-tolerant (FT) I/O; alternates include TIM1_BKIN, SPI2_NSS, USART3_CK, LPUART1_RTS/LPUART1_DE, TSC_G1_IO1, TIM15_BKIN and EVENTOUT.
34 PB13 bidirectional 5 V-tolerant (FT) I/O with Fm+ I2C capability; alternates include TIM1_CH1N, I2C2_SCL, SPI2_SCK, USART3_CTS, LPUART1_CTS, TSC_G1_IO2, TIM15_CH1N.
35 PB14 bidirectional 5 V-tolerant (FT) I/O with Fm+ I2C capability; alternates include TIM1_CH2N, I2C2_SDA, SPI2_MISO, USART3_RTS/USART3_DE, TSC_G1_IO3, TIM15_CH1.
36 PB15 bidirectional 5 V-tolerant (FT) I/O; alternates include RTC_REFIN, TIM1_CH3N, SPI2_MOSI, TSC_G1_IO4, TIM15_CH2 and additional functions WKUP7, TAMP_IN3.
37 PC6 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA; alternates include TIM3_CH1, LPUART2_TX, TSC_G4_IO1 and additional function COMP1_INP5.
38 PC7 bidirectional 5 V-tolerant (FT) I/O; alternates include TIM3_CH2, LPUART2_RX, TSC_G4_IO2 and LPTIM2_CH2.
39 PC8 bidirectional 5 V-tolerant (FT) I/O; alternates include TIM3_CH3 and TSC_G4_IO3.
40 PC9 bidirectional 5 V-tolerant (FT) I/O; alternates include TIM3_CH4 and TSC_G4_IO4.
41 PA8 bidirectional 5 V-tolerant (FT) I/O; alternates include MCO, TIM1_CH1, MCO2, USART1_CK, TSC_G7_IO1 and LPTIM2_CH1.
42 PA9 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA and Fm+ I2C capability; alternates include MCO, TIM1_CH2, I2C1_SCL, I2C2_SCL, USART1_TX, TSC_G7_IO2, TIM15_BKIN and additional function COMP1_INP4.
43 PA10 bidirectional 5 V-tolerant (FT) I/O with Fm+ I2C capability; alternates include TIM1_CH3, MCO2, I2C1_SDA, I2C2_SDA, SPI2_NSS, USART1_RX and TSC_G7_IO3.
44 PA11 [PA9] bidirectional 5 V-tolerant (FT, note 3) I/O; default mapping of PA11 with alternates TIM1_CH4, TIM1_BKIN2, SPI1_MISO, SPI2_MISO, USART1_CTS and COMP1_OUT, and PA9 can be remapped here via SYSCFG_CFGR1.
45 PA12 [PA10] bidirectional 5 V-tolerant (FT, note 3) I/O; default mapping of PA12 with alternates TIM1_ETR, SPI1_MOSI, SPI2_MOSI and USART1_RTS/USART1_DE, and PA10 can be remapped here via SYSCFG_CFGR1.
46 PA13 (SWDIO) bidirectional 5 V-tolerant (FT, note 4) I/O that is the SWDIO debug function after reset, with an internal pull-up activated upon reset; alternates include IR_OUT and TSC_G7_IO4.
47 VSS power_in Ground pin; all VSS pins must be connected to the ground supply.
48 VDD power_in Main supply pin; standard operating voltage range is 1.71 to 3.6 V.
49 PA14 (SWCLK) bidirectional 5 V-tolerant (FT, note 4) I/O that is the SWCLK debug function after reset, with an internal pull-down activated upon reset; alternates include LPTIM1_CH1 and TSC_G3_IO4.
50 PA15 bidirectional 5 V-tolerant (FT) I/O; alternates include TIM2_CH1, TIM2_ETR, USART2_RX, SPI1_NSS, USART3_RTS/USART3_DE, USART4_RTS/USART4_DE and TSC_G3_IO1.
51 PC10 bidirectional 5 V-tolerant (FT) I/O; alternates include USART3_TX, USART4_TX and TSC_G3_IO2.
52 PC11 bidirectional 5 V-tolerant (FT) I/O; alternates include USART3_RX, USART4_RX and TSC_G3_IO3.
53 PC12 bidirectional 5 V-tolerant (FT) I/O; alternates include USART3_CK and USART4_CK.
54 PD2 bidirectional 5 V-tolerant (FT) I/O; alternates include TIM3_ETR, USART3_RTS/USART3_DE and TSC_SYNC.
55 PB3 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA and Fm+ I2C capability; alternates include TIM2_CH2, LPTIM1_CH3, I2C2_SCL, I2C3_SCL, SPI1_SCK and USART1_RTS/USART1_DE.
56 PB4 bidirectional 5 V-tolerant (FT) I/O with Fm+ I2C capability; alternates include LPTIM1_CH4, TIM3_CH1, I2C2_SDA, I2C3_SDA, SPI1_MISO, USART1_CTS and TSC_G2_IO1.
57 PB5 bidirectional 5 V-tolerant (FT) I/O; alternates include LPTIM1_IN1, TIM3_CH2, SPI1_MOSI, USART1_CK, TSC_G2_IO2 and TIM16_BKIN.
58 PB6 bidirectional 5 V-tolerant (FT) I/O with Fm+ I2C capability; alternates include LPTIM1_ETR, I2C1_SCL, I2C2_SCL, USART1_TX, TSC_G2_IO3, LPUART2_TX and TIM16_CH1N.
59 PB7 bidirectional 5 V-tolerant (FT) I/O with analog switch supplied by VDDA and Fm+ I2C capability; alternates include LPTIM1_IN2, I2C1_SDA, I2C2_SDA, USART1_RX, USART4_CTS, TSC_G2_IO4 and LPUART2_RX.
60 PF3-BOOT0 bidirectional 5 V-tolerant (FT) I/O that also serves as the BOOT0 boot-mode pin, with EVENTOUT as alternate function.
61 PB8 bidirectional 5 V-tolerant (FT) I/O with Fm+ I2C capability; alternates include LPTIM1_IN2, I2C2_SCL, I2C1_SCL, USART3_TX and TIM16_CH1.
62 PB9 bidirectional 5 V-tolerant (FT) I/O with Fm+ I2C capability; alternates include IR_OUT, I2C2_SDA, I2C1_SDA, SPI2_NSS, USART3_RX and LPTIM1_CH4.
63 VSS power_in Ground pin; all VSS pins must be connected to the ground supply.
64 VDD power_in Main supply pin; standard operating voltage range is 1.71 to 3.6 V.

Key specifications

Parameter Value
Manufacturer ST(意法半导体)
Package LQFP-64(10x10)
Category
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (VDD, VDDA, VBAT) vs VSS VDDX - VSS -0.3 4 V 41
Input voltage on TT_xx pins VIN 4 V TT_xx pins; printed min is VSS - 0.3 41
Input voltage on any other pins VIN 4 V Any other pins; printed min is VSS - 0.3 41
Variations between different VDDX power pins of the same domain /ΔVDDX/ 50 mV 41
Variations between all the different ground pins (including VREF-) /VSSx-VSS/ 50 mV 41
Total current into sum of all VDD power lines (source) ∑IVDD 140 mA 41
Total current out of sum of all VSS ground lines (sink) ∑IVSS 140 mA 41
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 41
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 41
Output current sunk by any I/O and control pin except FT_f IIO(PIN) 20 mA 41
Output current sunk by any FT_f pin IIO(PIN) 20 mA FT_f pin 41
Output current sourced by any I/O and control pin IIO(PIN) 20 mA 41
Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) 100 mA 41
Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) 100 mA 41
Injected current on FT_xxx, TT_xx, RST IINJ(PIN) -5 0 mA Printed as -5/+0 41
Total injected current (sum of all I/Os and control pins) ∑/IINJ(PIN)/ 25 mA 41
Storage temperature range TSTG -65 150 °C 42
Maximum junction temperature TJ 150 °C 42
Internal AHB clock frequency fHCLK 0 56 MHz 42
Internal APB clock frequency fPCLK 0 56 MHz 42
Standard operating voltage VDD 1.71 3.6 V 42
Analog supply voltage (ADC or COMP used) VDDA 1.62 3.6 V ADC or COMP used 42
Analog supply voltage (OPAMP used) VDDA 1.8 V OPAMP used; printed max not given per row 42
Analog supply voltage (ADC, OPAMP, COMP not used) VDDA 0 V ADC, OPAMP, COMP not used; printed max not given per row 42
Backup domain supply voltage VBAT 1.55 3.6 V 42
I/O input voltage, TT_xx I/Os VIN -0.3 V TT_xx I/Os; printed max is VDDIOx + 0.3 42
I/O input voltage, all I/Os except TT_xx pins VIN -0.3 V All I/Os except TT_xx; printed max is min(min(VDD,VDDA)+3.6, 5.5) 42
Ambient temperature, suffix 6, maximum power dissipation TA -40 85 °C Suffix 6; maximum power dissipation 42
Ambient temperature, suffix 6, low-power dissipation TA -40 105 °C Suffix 6; low-power dissipation 42
Junction temperature range, suffix 6 version TJ -40 105 °C Suffix 6 version 42
Reset temporization after BOR0 is detected tRSTTEMPO 250 400 μs VDD rising 43
Brownout reset threshold 0, rising edge VBOR0 1.62 1.66 1.7 V Rising edge 43
Brownout reset threshold 0, falling edge VBOR0 1.6 1.64 1.69 V Falling edge 43
Brownout reset threshold 1, rising edge VBOR1 2.06 2.1 2.14 V Rising edge 43
Brownout reset threshold 1, falling edge VBOR1 1.96 2 2.04 V Falling edge 43
Brownout reset threshold 2, rising edge VBOR2 2.26 2.31 2.35 V Rising edge 43
Brownout reset threshold 2, falling edge VBOR2 2.16 2.2 2.24 V Falling edge 43
Brownout reset threshold 3, rising edge VBOR3 2.56 2.61 2.66 V Rising edge 43
Brownout reset threshold 3, falling edge VBOR3 2.47 2.52 2.57 V Falling edge 43
Brownout reset threshold 4, rising edge VBOR4 2.85 2.9 2.95 V Rising edge 43
Brownout reset threshold 4, falling edge VBOR4 2.76 2.81 2.86 V Falling edge 43
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40 °C < TA < +130 °C 44
Internal reference voltage spread over the temperature range ΔVREFINT 5 7.5 mV VDD = 3 V 44
Temperature coefficient TCoeff 30 50 ppm/°C -40°C < TA < +130°C 44
Voltage coefficient VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 44
Long term stability ACoeff 300 1000 ppm 1000 hours, T = 25°C 44
1/4 reference voltage VREFINT_DIV1 24 25 26 % VREFINT 44
1/2 reference voltage VREFINT_DIV2 49 50 51 % VREFINT 44
3/4 reference voltage VREFINT_DIV3 74 75 76 % VREFINT 44
HSI16 frequency fHSI16 15.88 16.08 MHz VDD=3.0 V, TA=30 °C 69
HSI16 duty cycle DuCy(HSI16) 45 55 % 69
HSI16 oscillator frequency drift over temperature ΔTemp(HSI16) -1 1 % TA = 0 to 85 °C 69
HSI16 oscillator frequency drift over temperature ΔTemp(HSI16) -2 1.5 % TA = -40 to 125 °C 69
HSI16 oscillator frequency drift over VDD ΔVDD(HSI16) -0.1 0.05 % VDD=1.62 V to 3.6 V 69
HSI16 oscillator start-up time tsu(HSI16) 0.8 1.2 μs 69
HSI16 oscillator stabilization time tstab(HSI16) 3 5 μs 69
HSI16 oscillator power consumption IDD(HSI16) 155 190 μA 69
Oscillator frequency (HSE) fOSC_IN 4 48 MHz 67
User external clock source frequency, voltage scaling Range 1 fHSE_ext 8 48 MHz Voltage scaling Range 1 65

CAD (KiCad official)

  • Symbol: STM32U031R8T6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm32u031r8t6-etched.step / stm32u031r8t6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32u031r8t6.step / stm32u031r8t6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ST(意法半导体) datasheet (134 pp, sha256 bc1d0cecfff8f152, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF